• 한국물환경학회지
• /
• 제22권4호
• /
• pp.626-631
• /
• 2006

The adsorption features of copper ion have been investigated by taking the barley residue which occurring from the beer production process as an adsorbent. Under the experimental conditions, adsorption equilibrium of copper ion was attained within 30 minutes after the adsorption started and the adsorption reaction was observed to be first order. As the temperature increased, the adsorbed amount of copper ion at equilibrium was also increased, which indicated that the adsorption reaction was endothermic. Based on the experimental results which obtained by varying the temperatures, several thermodynamic parameters for copper adsorption reaction were estimated. Regarding the electrokinetic behavior of barley residue, its electrokinetic potential was observed to be positive below pH 5 and turned into negative above this pH. In the pH range from 1.5 to 4, copper adsorption was found to be increased, which was well explained by the electrokinetic behavior of barley residue in the pH range. When nitrilotriacetic acid, which is a complexing agent, was coexisted with copper ion, equilibrium adsorption of copper ion was decreased and this was presumed to be due to the formation of metal complex. In addition, the adsorbed amount of copper ion was examined to be increased when $KNO_3$ was coexisted, however, it approached a saturated value above a certain concentration of $KNO_3$.

• 한국물환경학회지
• /
• 제23권3호
• /
• pp.314-318
• /
• 2007

The feasibility of the employment of waste oyster shell as an adsorbent for fluoride ion has been tested by considering the effect ionic condition on the adsorption of fluoride ion on oyster shell. The adsorption capacity of oyster shell for fluoride ion was found not to be significantly influenced by the ionic strength of aqueous environment. The existence of complexing agent such as nitrilotriacetic acid in wastewater decreased the adsorbed amount of fluoride ion by forming a stable complex of $CaT^-$ and the adsorption reaction of fluoride ion on oyster shell was examined to be endothermic. The coexisting heavy metal ionic adsorbate in wastewater hindered the adsorption of fluoride ion, however, its adsorbed amount was increased as the particulate size of adsorbent was decreased. Finally, a serial adsorption column test has been conducted for a practical application of adsorption process and the breakthrough of the column adsorption was observed in 22 hours under the experimental condition.

• 공업화학
• /
• 제5권6호
• /
• pp.1024-1029
• /
• 1994

경북 감포지역에서 산출되는 천연 제올라이트를 각기 다른 농도의 HCl과 NaOH로 화학처리한 시료와 금속양이온 교환한 시료를 제조 하였다. 이들 시료에 대한 질소의 흡착특성을 $25^{\circ}C$, 100~760 torr의 범위에서 조사하였다. 산처리한 시료의 질소 흡착량은 처리하기 전보다 감소하였으며, 알칼리 처리한 시료는 많이 증가하였다. 0.5N-HCl 처리 후 0.5N-NaOH로 연속처리한 경우 약 200% 정도 흡착량이 개선되었으나, 알칼리 처리 후 산으로 연속처리한 경우에는 오히려 감소하였다. $Na^+$, $K^+$, $Cs^+$를 이온교환한 경우 이온의 크기가 증가할수록 흡착량은 감소했으며, $Mg^{2+}$, $Ca^{2+}$, $Ba^{2+}$를 이온교환한 경우는 이온의 크기가 증가할수록 흡착량이 증가하였다.

• Journal of Industrial and Engineering Chemistry
• /
• 제67권
• /
• pp.312-315
• /
• 2018

Although the reversibility of 10,12-pentacosadiynoic amino meta-acid(PCDA-mBzA) against temperature and pH was reported, the modulation of reversibility by ion adsorption at terminal functional group has not been investigated. In this work, we developed a simple method for modulating the reversibility of PCDA-mBzA films upon a thermal stimulus by cadmium ion adsorption inducing the breakage of the outer hydrogen bonding of two hydrogen bonds, which are responsible for the reversible properties of PCDA-mBzA. External reflection-Fourier transform infrared (ER-FTIR) analyses revealed that the hydrogen bonding between the carboxylic acid groups was broken through ion adsorption and only a single hydrogen bond between the amide groups remained in the PCDA-mBzA polymer. In addition, PCDA-mBzA films could recover their original property through cadmium ion desorption. These results present that the transition between reversibility and irreversibility can be modulated artificially simply through the adsorption and desorption of metal ions.

• 환경위생공학
• /
• 제14권4호
• /
• pp.1-8
• /
• 1999

This study was aimed ultimately to develop an adsorption process treating heavy metal wastewater by utilizing activated carbon using flyash. The affecting factors in adsorption process on heavy metal by flyash adhesion-activated carbon are s follows. Factors such as pH, and quality of activated carbon, and reaction time made batch adsorption isotherm described adsorption capacity was made use of the investigation to evaluate adsorptive possibility of heavy metal.As the results of this study, H ion has influence on adsorption of heavy metal if pH is low. As reaction time is transformed, factors such as optimum reaction time is taken into consideration an adsorptive process of heavy metal because an adsorption and a reduction process occur. Adsorption isotherm of adhesion-activated carbon was generally obeyed to Freundlich formular than Langmuir formular and Freundlich constant, l/n were obtained in the range of 0.1~0.5.

• 한국재료학회지
• /
• 제14권3호
• /
• pp.229-234
• /
• 2004

All the applications of natural zeolites make use of one or more of their physical and chemical properties: adsorption, ion-exchange and related molecular sieve properties, dehydration and rehydration, and siliceous composition. Accordingly, the applications of zeolite have been carried out in the various aspects because of its large cation exchange capacity and adsorption properties. In this paper, the adsorption effect of heavy metal ions in wastewater on zeolite mineral by batch adsorption process is studied. The amounts of adsorbed ions were variable by original pH and ionic concentration, especially original pH of solution had an important effect on the adsorption. In case of low pH solution, e.g. below 3.0, clinoptilolite adsorbed $Pb^{2+}$ ,$ Cd ^{2+ }$ , $Cu^{2+}$ and $Zn^{ 2+}$ , but mordenite almost did not adsorb except $Pb^{2+}$ . Under the same conditions, these ions were more adsorbed on clinoptilolite than on mordenite mineral. The velocity of adsorption was relatively fast and it was confirmed by shaking test that the equilibrium of adsorption could be attained in about one hour. The species of exchangeable cation of zeolite had an effect on its removing ability and zeolite of the sodium-exchanged type was the best.

• 한국광물학회지
• /
• 제11권1호
• /
• pp.20-31
• /
• 1998

Adsorption of metal elements onto illite and halloysite was investigated at $25^{\circ}C$ using pollutant water collected from the gold-bearing metal mine. Incipient solution of pH 3.19 was reacted with clay minerals as a function of time: 10 minute, 30 minute, 1 hour, 12 hour, 24 hour, 1 day, 2 day, 1 week, and 2 week. Twenty-seven cations and six anions from solutions were analyzed by AAs (atomic absorption spectrometer), ICP(induced-coupled plasma), and IC (ion chromatography). Speciation and saturation index of solutions were calculated by WATEQ4F and MINTEQA2 codes, indicating that most of metal ions exist as free ions and that there is little difference in chemical species and relative abundances between initial solution and reacted solutions. The adsorption results showed that the adsorption extent of elements varies depending on mineral types and reaction time. As for illite, adsorption after 1 hour-reaction occurs in the order of As>Pb>Ge>Li>Co, Pb, Cr, Ba>Cs for trace elements and Fe>K>Na>Mn>Al>Ca>Si for major elements, respectively. As for halloysite, adsorption after 1 hour-reaction occurs in the order of Cu>Pb>Li>Ge>Cr>Zn>As>Ba>Ti>Cd>Co for trace elements and Fe>K>Mn>Ca>Al>Na>Si for major elements, respectively. After 2 week-reaction, the adsorption occurs in the order of Cu>As>Zn>Li>Ge>Co>Ti>Ba>Ni>Pb>Cr>Cd>Se for trace elements and Fe>K>Mn>Al, Mg>Ca>Na, Si for major elements, respectively. No significant adsorption as well as selectivity was found for anions. Although halloysite has a 1:1 layer structure, its capacity of adsorption is greater than that of illite with 2:1 structure, probably due to its peculiar mineralogical characteristics. According to FTIR (Fourier transform infrared spectroscopy) results, there was no shift in the OH-stretching bond for illite, but the ν1 bond at 3695 cm-1 for halloysite was found to be stronger. In the viewpoint of adsorption, illite is characterized by an inner-sphere complex, whereas halloysite by an outer-sphere complex, respectively. Initial ion activity and dissociation constant of metal elements are regarded as the main factors that control the adsorption behaviors in a natural system containing multicomponents at the acidic condition.

• 한국재료학회지
• /
• 제11권2호
• /
• pp.120-125
• /
• 2001

흡착재료에는 hydroxyapatite(HAp), zeolite,, 분자체탄소, 활성탄, 알루미나등의 재료가 많이 사용되고 있다. 이들 흡착재료 중에서 금속이온과 양이온 교환반응이 좋은 HAp, zeolite는 폐수처리과정에서 많이 사용되고 있지만, 피러나 이 폐수처리과정에서 문제되는 것은 유해한 중금속뿐만 아니라 많은 세균들이 이 폐수에 존재하고 있어 수질오염 등의 여러 가지 문제를 야기 시키고 있다. 본 연구는 여러 중금속 흡착재료 중에서 HAp, zeolite에 항균효과가 있다고 알려진 금속이온 (Ag$^{+}$, Cu$^{2+}$, $Zn^{2+}$)들을 이온 치환시켜 항균성을 흡착재료에 부여하고자 한다. HAp, zeolite에 Ag$^{+}$, Cu$^{2+}$, $Zn^{2+}$의 금속이온들을 치환시킨 후, E. Coli로 항균효과를 측정하였다. HAp, zeolite와 여러 금속이온 치환후의 항균효과를 측정한 결과, Ag$^{+}$ 로 이온치환 시킨 HAp, zeolite에서는 1$\times$$10^{-2}$cell/ml 농도의 E. Coli에서 24시간가지 완벽한 항균효과를 보였고, Cu$^{2+}$와 $Zn^{2+}$으로 이온치환 시킨 경우에서는 좋은 항균효과를 보이지 않았다. 이러한 결과는 Feng. et. al.이 발표한 바와 같이1) Ag ion이 cell내부의 DNA에 영향을 기척, 복제능력을 떨어뜨리고 Cell을 비활성화 시키기 때문이다.

• 한국환경과학회지
• /
• 제8권4호
• /
• pp.491-496
• /
• 1999

Removal of Cu(II), Cr(III) and Pb(II) ions from aqueous solutions using the adsorption process on the loesses has been investigated. Variations of contact time, pH, adsorption isotherms and selectivity of coexisting ions were experimental parameters. pH of KJ and YIK samples diluted to 1% solution, was rearly the same with each value of pH 5.58 and 5.49, and both samples showed weak acidic properties. From chemical analysis, both samples contain remarkably different amounts of ${SiO}_{2}$, ${Al}_{2}O_{3}$ and ${Fe}_{2}O_{3}$. From XRD measurement, quartz was mainly observed in both samples. Kaolinite was also observed, also in both samples, but Feldspar was only observed in KJ sample. Adsorption of metal ions on the loesses were reached at equilibrium by shaking for about 30min. The adsorption of Cr(III) ion was higher than that of Cu(II) oand Pb(II) ions. The order of amount adsorbed among the investigated ions was Cr(III)>Pb(II)>Cu(II). In acidic solution, the adsorptivity of loesses was increased as pH increased. The adsorption of Cr(III) ion on the loesses were fitted to the Freundlich isotherms. Freundlich constants(1/n) of KJ and YIK loesses were 0.54 and 0.55, respectively.

• 한국환경과학회지
• /
• 제32권5호
• /
• pp.343-353
• /
• 2023

A zeolite material (ZCH) was synthesized from coal fly ash in an HD thermal power plant using a fusion/hydrothermal method. ZCH with high crystallinity could be synthesized at the NaOH/CFA ratio of 0.9. Ion-exchanged ZCH adsorbents for ammonia removal were prepared by ion-exchanging various cation (Cu²⁺, Co²⁺, Fe³⁺, and Mn²⁺) on the ZCH. They were used to evaluate the ammonia adsorption breakthrough curves and adsorption capacities. The ammonia adsorption capacities of the ZCH and ion-exchanged ZCHs were high in the order of Mn-ZCH > Cu-ZCH ≅ Co-ZCH > Fe-ZCH > ZCH according to NH₃-TPD measurements. Mn-ZCH ion-exchanged with Mn has more Brønsted acid sites than other adsorbents. The ion-exchanged Cu²⁺, Co²⁺, Fe³⁺, or Mn²⁺ ions uniformly distributed on the surface or in the pores of the ZCH, and the number of acidic sites increased on the alumina sites to form the crystal structure of zeolite material. Therefore, when the ion-exchanged ZCH was used, the adsorption capacity for ammonia gas increased.