• 대한치과보철학회지
• /
• 제45권6호
• /
• pp.805-814
• /
• 2007

Statement of problem. Composite resin-veneered metal restorations can be used as an alternative to porcelain-fused-metal restorations. But, because of the relatively low bond strength of veneering composite to metal framework, various surface treatment methods have been introduced to improve the bond strength. Purpose. The object of this study was to compare the shear bond strength of different combinations of each of the two bonding systems and each of the two composite veneering resins to cp-Ti/Co-Cr alloy. Material and methods. Two resin bonding systems (metal conditioner containing MEPS monomer, tribochemical silicoating system) and two composite resins (Gradia, Sinfony) were tested on cp-Ti and Co-Cr alloy. Then, according to manufacturers' instructions, resin bonding systems and composite resins were applied. All test specimens were divided into four groups for each alloy; I) sandblast + Metal Primer II + Gradia (MG), II) sandblast + Metal Primer II + Sinfony (MS), III) Rocatec + Gradia (RG), IV) Rocatec + Sinfony (RS). The shear bond strength was determined using a universal testing machine and all data were statistically analyzed with Mann-Whitney test and Kruskal-Wallis test at the significance level of 0.05. Results. The mean (standard deviations) of shear bond strength according to the combinations of two bonding systems and two composite resins to cp-Ti arranged from 16.44 MPa to 17.07 MPa and the shear bond strength to Co-Cr alloy ranged from 16.26 MPa to 17.70 MPa. The result shows that the difference were not statistically significant. Conclusion. The shear bond strengths of composite resins to both cast cp-Ti and Co-Cr alloy were not significantly different between the metal conditioner and the tribochemical silicoating system. And no differences in bond strength were found between cp-Ti and Co-Cr alloy.

• 대한치과보철학회지
• /
• 제37권4호
• /
• pp.454-464
• /
• 1999

The metal ceramic crown is currently the most popular complete veneer restoration in dentistry, but in many cases, the metal cervical collar at the facial margin is unesthetic and unacceptable. Facial porcelain margin has been used in place of it. But this dose not solve the problems, such as dark gingival discoloration and cervical opaque reflection of porcelain veneer. Recently, metal copings which were designed to terminate its labio-cervical end on the axial walls coronal to the shoulder have been clinically used to solve the esthetic problem of metal ceramic crown. But in this design, porcelain veneer of labio-cervical area which is not supported by metal may not be able to resist the stress during cementation and mastication. The purpose of this study was to evaluate fracture strength and fractured appearance of crowns according to different coping designs. A resin maxillary left central incisor analogue was prepared for a metal ceramic crown, and metal dies were made with duplication mold. Metal copings were made and assigned to one of four groups based on facial framework designs: group 1, coping with 0.5mm metal collar; group 2, metal extended to the shoulder; group 3, metal extended to 1mm coronal tn the shoulder: group 4, metal extended to 2mm coronal to the shoulder. Copings and crowns were adjusted to be same size and thickness, and cemented to metal dies with zinc phosphate cement by finger pressure. Fracture strength was measured with Instron Universal Testing Machine. Metal dies were anchored in Three-way-vice at 3mm below finish line and at $130^{\circ}$ inclined to the long axis of the crown. Load was directed lingually at 2mm below midincisal edge. Load value at initial crack and at catastrophic fracture was recorded. The results obtained were as follows : 1. Fracture strength values at initial crack were higher in groups 1, 2 than in groups 3, 4 but this difference was not statistically significant(P<0.05). 2. Conventional metal collared crown had greater catastrophic fracture strength than any other collarless crowns. 3. The greater the labial metal coping reduction, the lower the catastrophic fracture strength of crowns but when more than 1mm of labial metal reduction was done, the difference in strengths was not statistically significant(p<0.05). 4. The strongest collarless coping design was group 2.

• 한국환경과학회지
• /
• 제22권10호
• /
• pp.1273-1278
• /
• 2013

Novel rhodamine 6G fluorescent chemosensors 1 and 2 for the detection of transition metal cations were synthesized through the condensation of rhodamine 6G ethylenediamine with each of 2-hydroxy-1-naphthaldehyde and 2,6-pyridinedicarbaldehyde, respectively. 1 and 2 were characterized using $^{13}C$ NMR, $^1H$ NMR and mass spectroscopy. Fluorometric and colorimetric measurements involving various metal ions revealed the ring opening of the rhodamine 6G spirocycle framework. In the absence of metal cations, 2 was colorless and non-fluorescent, whereas the addition of metal cations ($Hg^{2+}$ and others) changed the color to pink, accompanied by the appearance of an orange fluorescence. The chemosensors exhibited high selectivity for $Hg^{2+}$ over other divalent first-row transition metals. The complexes of $Hg^{2+}$ with 1 and 2 were successfully isolated. A huge enhancement in the fluorescence for both one- and two-photon excitations makes these compounds suitable candidates to be used for fluorescent labeling of biological systems.

• 대한화학회지
• /
• 제53권5호
• /
• pp.553-559
• /
• 2009

Metal organic frameworks (MOF)과 유사하게 금속과 유기물로 이루어진 골격 물질 중 제올라이 트와 유사한 구조를 갖는 zeolitic imidazolate framework (ZIF)를 처음으로 마이크로파(MW)를 이용하여 합성하였다. ZIF 중 잘 알려진 ZIF-8을 전통적인 전기 가열(CE)과 마이크로파 조사로 합성하였으며 ZIF-8은 $140{\sim}180^{\circ}C}$의 범위에서 용이하게 얻을 수 있었다. MW 합성에 의해 ZIF-8을 신속 하게 합성할 수 있었으며 결정 크기는 전통적인 합성에 비해 전반적으로 감소하였다. $140{^{\circ}C}$에서의 합성 결과 전통 적인 합성에 비해 MW에 의해 약 5배의 반응 속도가 증가함을 알 수 있었고 4시간 이내에 합성 반응이 종료됨을 알 수 있었다. MW로 얻어진 ZIF-8은 CE에 의한 ZIF-8에 비해 증가된 표면적과 세공부피를 가 졌다. 얻어진 모든 ZIF-8은 질소 흡착 실험 결과 type-I 흡착 등온선을 보였고 미세 세공을 가짐을 알 수 있었다. FTIR 및 TGA 결과 두 방법으로 얻어진 ZIF-8은 서로 유사한 결합 및 열적 특성을 보였다.

• 대한치과보철학회지
• /
• 제46권2호
• /
• pp.201-208
• /
• 2008

연구목적: 시멘트 유지형 지대주를 인상용 코핑으로 이용하고 레진이나 금속 구조물에 접착하여 스플린팅하는 새로운 인상법을 시도하였다. 연구의 목적은 첫 번째, 3개의 임플랜트가 $15^{\circ}$ 경사지게 식립된 모형에서 closed tray 인상법과 레진 스플린팅한 open tray 인상법의 정확성을 비교하는 것이고 두 번째, 새로운 인상법의 정확성을 앞의 두 가지 인상법과 비교하는 것이다. 연구 재료 및 방법: 3개의 임플랜트 아날로그가 선상으로 배열되고 가운데 아날로그는 모형에 수직이고 양쪽 끝 아날로그는 이것에 앞뒤로 $15^{\circ}$ 경사지게 배열된 주모형과 주모형에 잘 적합되는 기준구조물을 제작하였다. closed tray 인상법, 레진 스플린팅한 open tray 인상법, 지대주-레진구조물 접착 인상법, 지대주-금속구조물 접착 인상법, 각 10개씩 40번의 인상을 채득하여 복제모형을 제작하였다. 이미지 처리할 수 있는 광학 현미경을 이용하여 기준구조물과 복제모형내의 아날로그와의 수직간격을 측정하여 인상의 정확성을 평가하였다. 통계처리는 one-way ANOVA와 사후 검정으로 Tukey test를 5% 유의수준으로 시행하였다. 결과: closed tray 인상법;74.3 (${\pm}33.4$)${\mu}m$의 간격은 레진 스플린팅한 open tray 인상법과 다른 두 가지 새로운 인상법보다 간격의 크기가 통계적 유의성 있게 컸다(P<.05). 지대주-금속구조물 접착 인상법;42.5 (${\pm}11.9$)${\mu}m$은 다른 인상법들 보다 간격의 크기가 통계적 유의성 있게 작았다(P<.05). 지대주-레진구조물 접착 인상법;51.0 (${\pm}14.1$)${\mu}m$은 레진 스플린팅한 open tray 인상법50.3 (${\pm}16.9$)${\mu}m$과 통계적 유의성 있는 차이를 보이지 않았다(P>.05). 결론: 이 연구의 한계 내에서, 레진 스플린팅한 open tray 인상법은 closed tray 인상법보다 우수한 정확성을 나타내었고, 지대주를 금속구조물에 접착하는 새로운 인상법의 정확성은 레진 스플린팅한 open tray 인상법보다 우수하였다.

• 대한치과보철학회지
• /
• 제46권6호
• /
• pp.634-638
• /
• 2008

PURPOSE: The application of computer-aided technology to implant dentistry has created new opportunities for treatment planning, surgery and prosthodontic treatment, but the correct selection and combination of available methods may be challenging in times. Hence, the purpose of this case report is to present a combination of several computer-aided tools as approaches to manage complicated implant case. MATERIAL AND METHODS: A 47 year-old female patient with severe dental anxiety, high expectations, financial restrictions and poor compliance presented for a fixed rehabilitation. A CT scan with a radiographic template obtained with software (SimPlant, Materialize, Leuven, Belgium) was used for treatment planning. The surgical plan was created and converted into a stereolithographic model of the maxilla with bone-supported surgical templates (SurgiGuide, Materialise, Leuven, Belgium), that allowed for the precise placement of 7 implants in a severely resorbed edentulous maxilla. After successful osseointegration, an accurate scan model served as the basis for the fabrication of a one-piece milled titanium framework using the Procera (Nobel Biocare, Gothenburg, Sweden) technology. The final rehabilitation of the edentulous maxilla was rendered in the form of a screw-retained maxillary metal-reinforced resin-based complete prosthesis. RESULTS: Despite challenging circumstances, 7 implants could be placed without bone augmentation in a severely resorbed maxilla using the SimPlant software for pre-implant analysis and the SurgiGuide-system as the surgical template. The patient was successfully restored with a fixed full arch restoration, utilizing the Procera system for the fabrication of a milled titanium framework.

• The Journal of Advanced Prosthodontics
• /
• 제10권2호
• /
• pp.128-131
• /
• 2018

PURPOSE. This study aimed to evaluate the marginal discrepancy of full-arch frameworks in implant-supported prostheses fabricated using pre-sintered soft alloy (PSA). MATERIALS AND METHODS. Full-arch metal frameworks were fabricated on the edentulous implant model using casting alloy (CA), fully-sintered hard alloy (FHA), and PSA (n = 4 in each group). To evaluate the misfit of the framework to the abutments, the absolute marginal discrepancy (AMD) values of the frameworks were measured in cross-sectional images that had been drawn as part of the triple-scan protocol. The AMD values were compared among the tested alloy groups using the Kruskal-Wallis test, with a post hoc Mann-Whitney U test (${\alpha}=.05$). RESULTS. The FHA and PSA groups showed lower marginal discrepancies than the CA group (P<.001). However, the FHA group did not differ significantly from the PSA group. CONCLUSION. Soft alloy milling is comparable to hard alloy milling, and it is more precise than casting in terms of the marginal fit of implant-supported, full-arch prostheses.

• Bulletin of the Korean Chemical Society
• /
• 제33권11호
• /
• pp.3793-3796
• /
• 2012

A novel 3D compound $\{[Cu(L)(H_2O)_4][Cu_2(SIP)_2(L)_2]\}{\cdot}2H_2O$ (1) (L = N,N-bis(4-pyridinecarboxamide)-1,4-butane, SIP = 5-sulfoisophthalate) is hydrothermally synthesized. X-ray diffraction analysis reveals that compound 1 is composed of 2D anionic $[Cu_2(SIP)_2(L)_2]_n{^{2n-}}$ double-layers and discrete 1D cationic $[CuL(H_2O)_4]_n{^{2n+}}$ polymeric chains, which represents a rare 3D polypseudo-rotaxane MOF from intercalation of 1D and 2D framework. In addition, the luminescent property and electrochemical behavior of compound 1 have been investigated.

• Korean Chemical Engineering Research
• /
• 제51권4호
• /
• pp.443-454
• /
• 2013

콜로이드 실리카와 가용성 실리카를 이용하여 나트륨이 첨가되지 않은 다양한 금속이온 첨가 MCM-41 촉매를 제조하였다. 전이금속 이온인 $V^{5+}$, $Co^{2+}$ 및 $Ni^{2+}$이 MCM-41에 첨가되었을 경우 기공벽 내의 실리콘 이온과 등방치환을 하여 실리카 기공벽 내에서 독립된 단일 활성점을 형성하여 우수한 환원 및 활성 내구성을 보였다. 수소 승온 환원법을 이용하여 Co-MCM-41 촉매의 기공 곡률 반경효과에 대해 검토해 본 결과, 적절한 환원 처리와 기공 크기 및 pH 조절에 따라 코발트 금속입자의 크기를 1nm 이하의 범위에서 조절할 수 있었으며, 이 미세 금속 입자들은 표면 금속이온들과의 결합으로 인해 상당한 고온 안정성이 있음을 발견하였다. 완전 환원 후에도 비정형 실리카의 부분 덮힘으로 인해 금속 입자들의 표면 이동 및 뭉침 현상이 현저히 저하되는 것을 볼 수 있었다. 이들 촉매의 반응 예로 금속 입자 크기에 민감한 단일층 탄소 나노튜브의 합성을 Co-MCM-41을 이용하여 실시하였고, 금속 입자의 안정성 시험반응으로 Co 및 Ni-MCM-41을 이용한 CO 메탄화 반응, V-MCM-41을 이용한 메탄올 및 메탄의 부분 산화반응 및 기공곡률 반경이 촉매활성에 미치는 영향 등을 살펴보았다.

• 한국응용과학기술학회지
• /
• 제37권2호
• /
• pp.260-267
• /
• 2020

본 연구에서는 "이온젤" 이라고 불리는 고분자 기반의 PVA(polyvinyl alcohol) 기반의 고체 전해질에 이온성 액체 BMIMBF4 (1-buthyl-3-methylimidazolium tetrafluoroborate)를 첨가하여 제조한 전고체 전해질과 활성탄소와 금속유기골격체 복합재료 기반의 전극 재료를 이용하여 슈퍼커패시터를 제작하였으며, 유기골격체의 유 무에 따른 전기화학적 특성을 분석하여 보았다. 슈퍼커패시터의 전기화학적 특성은 순환전압전류법(CV), 전기화학적 임피던스 분광법(EIS) 및 전정류 충·방전법(GCD)을 통하여 비교 및 분석하여 보았다. 그 결과로, 금속유기골격체가 함유되지 않은 슈퍼커패시터의 전기용량값은 380 F/g 으로 확인 할 수 있었고, 이 값은 금속유기골격체를 첨가하였을 때 340 F/g로 감소하는 현상을 확인할 수 있었다. 이러한 결과로 1 wt%의 금속유기골격체의 함유량은 전기화학적 특성 감소에 영향을 주는 것으로 사료되며 이러한 결과를 바탕으로 금속유기골격체의 첨가량을 최적화 할 필요가 있다고 판단된다.