• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.09a
• /
• pp.56-63
• /
• 2003

Fractional composition and mobility of sediments some heavy metals in Okdong stream are investigated. The fractional scheme for sediment heavy metal was made for five chemically defined heavy metal forms as adsorbed fraction, carbonate fraction, reducible fraction, organic fraction, and residual fraction (Tessier et at., 1979). The most abundant fraction of the sediment heavy metal is reducible and secondly abundant organic fraction. Adsorbed fraction is minor part of the total heavy metals. Mobilization of sediment heavy metals in stream Okdong is occur 19.8∼56.7% of total cadmium concentrate. The most abundant fraction of the sediment metal is organic fraction in Cu, Pb metals investigated. Labile fraction of sediment metals are 0.5%∼48.5% of total Zn, 2.6%∼48.1% of total Pb, 0.2∼36.9% of total Cu respectively, Most of labile fraction consists of reducible fraction for Cd, Zn, adsorbed fraction for Pb, reducible fraction for Cu, adsorbed fraction for Ni. The Mobilization of Zn and Cu is most likely to occur when oxygen depletes and that of Pb and Ni occurs when physical impact, oxygen depletion and pH reduction.

• Korean Journal of Environmental Agriculture
• /
• v.25 no.3
• /
• pp.236-246
• /
• 2006

In this study, we give insight into questionable results that can be encountered in the conventional sequential extraction of heavy metals (Cd, Cu, and Zn) from soils. Objectives of this study were to determine the extraction variability of exchangeable (EXC)-metals as using six different EXC-extractants commonly accepted, and to investigate selectivity problems with carbonates bound (CAB)-metal fraction, a buffered acetate (1.0 M NaOAc; pH 5.0) extractable-metal fraction, leading to erratic results in especially non-calcareous soils. The contents of EXC-metals were markedly varied with the different extractability of various EXC-metal extractants used. The contents of EXC-Cd fraction were ranged from 2.0 to 74.3% of total Cd content in all of the metal spiked soils studied. The contents of EXC-Zn fraction extracted with the different EXC-extractants were varied with soil types, which were from 0.4 to 3.9% of total Zn in the calcareous soils, from 7.6 to 17.9% in the acidic soil, and from 13.6 to 56.8% in the peat soil. However, the contents of EXC-Cu fraction were relatively similar among the applications of different EXC-meal extractants, 0.2 to 2.1 % of total Cu, in all soils tested. Also, these varied amounts of EXC-metal fractions, especially Cd and Zn, seriously impacted the contents of subsequent metal fractions in the procedure. Furthermore, the CAB-Cd, -Cu, and -Zn fractions extracted by the buffered acetate solution were in critical problem. That is, the buffered acetate solution dissolved not only CAB-metals but also metals that bound or occupied to subsequent fractions, especially OXD-metal fraction, in both calcareous and non-calcareous soils. The erratic results of CAB-fraction also seriously impacted the amounts of subsequent metal fractions. Therefore, the conventional sequential extraction should be reconsidered theoretically and experimentally to quantify the target metal fractions or might be progressively discarded.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2001.04a
• /
• pp.11-14
• /
• 2001

In this study, the relationship between metals (Cu, Cr, Cd, Zn. Pb, and Fe) 5 fractions and toxicity of soil samples from various contaminated sites in Korea were investigated. Metal toxicity of soils was tested using MetPLATE$^{TM}$ test kit, which is known as metal sensitive and organic insensitive. Significant amount of Fe was found in soils, and metal contents were in the order of Fe>Zn>Pb>Cu>Cr>Cd. Metal levels in organic fraction were rather high for all metals except Fe, and quite high percentages (35~79%) for residual fraction were observed for all metals. There were no significant relationships between the content of each metal fraction and toxicity which showed regression $R^2$in the range of 0.0003~0.414. However, correlation between toxicity and total metal contents showed regression coefficient $R^2$= 0.72. These results showed that the risk evaluation of metals in contaminated sites should be difficult to assess only by the contents of metal distribution because of the complexity of mixture of various metals.s.

• Journal of Environmental Science International
• /
• v.11 no.12
• /
• pp.1299-1305
• /
• 2002

Thirty sediment samples of the <63${\mu}{\textrm}{m}$ fraction collected from the southwestern coast of Korea were analysed for their heavy metal (Fe, Mn, Cr, Co, Cu, Ni, Zn and Pb) concentration. The results show that sediment texture plays a controlling role on the total metal concentrations and their spatial distribution. A single lM HCl extraction procedure was used in order to assess the environmental risk of heavy metals in bottom sediments. The non-residual fraction was the most abundant pool for Mn and Pb in most samples, which means that this metals are highly avaliable in these sediments. Cr, Ni, Fe, Co, Zn and Cu were mainly associated with the residual fraction, suggesting that their concentrations are controlled significantly by transport processes with the fine particles as carriers from diffuse pollution source. Concentration enrichment ratios(CER) were calculated from the non-residual contents and their values allowed us to classify the sediments according to their environmental risk.

• Journal of Welding and Joining
• /
• v.17 no.4
• /
• pp.60-68
• /
• 1999

The previously developed two dimensional model was modified in order to predict more accurately the degree of microsegregation and eutectic fraction on in weld metal whose solidification rate is very fast. The model employed the same assumptions with previous model but considered of a tip undercooling. The previously predicted microsegregation and eutectic fraction has the discrepancies between simulated and examined results in the weld metal solidification. The experiments for the weld metal solidification of 2024 A1 and Fe-Ni alloy were carried out in order to examine the reasonability and feasibility of this modified model. The concentration profile of the solute and eutectic fraction predicted by the simulation agreed well with those found from experimental works. According to the results, it was believed that the dendrite tip undercooling considered in the modified model be reasonable for predicting the degree of microsegregation more accurately in weld metla solidification. In the GTA welds, degree of dendrite-tip undercooling increases with increasing solidification rage(welding speed). This serves to increase the concentration of dendrite core and thus result in reducing the degree of segregation. And solid state diffusion(back diffusion) during solidification is very low in the weld metal solidification so that little additional homogenization of solute occurs during solidification. With consideration of tip undercooling this modified model can predict exactly degree of microsegregation and eutectic fraction from slow solidification(casting) to fast solidification(welding).

• Journal of Welding and Joining
• /
• v.32 no.6
• /
• pp.29-34
• /
• 2014

This paper has an purpose to study the effect of C on the toughness of YS 460 MPa FCAW weld metal. These effects were evaluated by charpy impact and CTOD test about 4 FCAW weld metal containing various C and Si content in relation to microstructure. Increase of C content was helpful to increase AF volume fraction and reduce PF(G) and FS volume fraction by increasing super cooling rate for ferrite transformation. Also, Increase of C content up to 0.045wt% made the strength and impact toughness higher by increasing AF volume fraction. The weld metal containing higher C content indicated higher CTOD value. It is because the volume fraction of PF(G) and FS, can play a role as crack initiation site, was reduced. Effect of C on the strength and elongation of weld metal was higher with an increase of Si contents.

• The Korean Journal of Ecology
• /
• v.24 no.1
• /
• pp.35-43
• /
• 2001

Accumulation, elimination and subcellular distribution of heavy metals in Littorina brevicula exposed to cadmium and zinc separately and concurrently were investigated. When the winkles had been exposed to 400 ㎍/L CdCl₂ and 3000 ㎍/l ZnSO₄ separately for 90 days, each of the metal body burden in the whole sofl parts increased in proportion to time of exposure until 70 days. But it didn't increase after 70 days. But when the winkles had been exposed to cadmium and zinc simultaneously, cadmium body burden decreased but zinc body burden increased as compared to the winkles exposed to each of the metal. We also found that cadmium accumulated in the winkles was not depurated for 42 days, but zinc accumulated in them was depurated. Especially, zinc was depurated faster when they had been exposed to mixture of cadmium and zinc. After the winkles had been exposed to cadmium and zinc separately for 70 days, about 60% cadmium of the total body burden was associated with the soluble fraction, while about 75% zinc of the total body burden was associated with insoluble fraction. And these trends of metal partitioning did not alter when the winkles had been exposed to metal mixture. After the soluble fraction applied to gel-filtration chromatography column, the distribution patterns of cadmium and zinc associated with proteins or ligands were different each other. Most of cadmium (＞90%) in the soluble fraction was bound to MBP-1 (Metal-binding protein-1), about 6.5 kDa), while zinc was distributed evenly to HMW (High molecular weight fraction, >60 kDa), MBP-1, MBP-2 (about 5 kDa), LMW (Low molecular weight fraction, <1 kDa).

• Journal of Ocean Engineering and Technology
• /
• v.17 no.1
• /
• pp.55-60
• /
• 2003

The effect of size and volume fraction of ceramic particles, with sliding velocity on the wear properties were investigated for the metal matrix composites fabricated by the pressureless infiltration process. The metal matrix composites exhibited about 5.5 - 6 times the wear resistance compared with AC8A alloy at high sliding velocity, and by increasing the particle size and decreasing the volume fraction, the wear resistance was improved. The wear resistance of metal matrix composites and AC8A alloy exhibited different aspects. Wear loss of AC8A alloy increased with sliding velocity, linearly : whereas, metal matrix composites indicated more wear loss than AC8A alloy at the slow velocity region. However, a transition point of wear loss was found at the middle velocity region, which shows the minimum wear loss. Further, wear loss at the high velocity region exhibited nearly the same value as the slow velocity region. In terms of wear mechanism, the metal matrix composites generally exhibited abrasive wear at slow to high sliding velocity； however, AC8A alloy showed abrasive wear at low sliding velocity and adhesive and melt wear at high sliding velocity.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2002.10a
• /
• pp.379-384
• /
• 2002

The effect of size and volume fraction of ceramic particles with sliding velocity on the wear properties were investigated for the metal matrix composites fabricated by pressureless infiltration process. The particulate metal matrix composites exhibited about 5.5 - 6 times of excellent wear resistance compared with AC8A alloy at high sliding velocity, and as increasing the particle size and decreasing the volume fraction the wear resistance was improved. The wear resistance of metal matrix composites and AC8A alloy exhibited different aspects. Wear loss of AC8A alloy increased with sliding velocity linearly. whereas metal matrix composites indicated more wear loss than AC8A alloy at slow velocity region, however a transition point of wear loss was found at middle velocity region which show the minimum wear loss, and wear loss at high velocity region exhibited nearly same value with slow velocity region. In terms of wear mechanism, the metal matrix composites exhibited the abrasive wear at slow to high sliding velocity generally, however AC8A alloy showed abrasive wear at low sliding velocity and adhesive and melt wear at high sliding velocity.

• Journal of Soil and Groundwater Environment
• /
• v.16 no.1
• /
• pp.42-50
• /
• 2011

Potential risk of heavy metals to various receptors including humans depends on the bioavailability of the heavy metals in soil. In this study, the heavy metal extraction methods using 0.1N HCl and aqua regia were compared with the Tessier's sequential extraction method to assess whether these two methods can be used to determine the plant-available heavy metal concentrations. The contamination characteristics of copper (Cu), cadmium (Cd), lead (Pb), and arsenic (As) found in soils collected from 75 sites around the closed Janghang smelter were analyzed by extracting heavy metals using 0.1 N HCl, aqua regia, and the Tessier's sequential extraction method. The portion of metals bioavailable to plants is considered as the sum of the fraction 1 (exchangeable) and the fraction 2 (carbonates binding) of the Tessier's 5-step sequential extraction method, which were determined to be 3.1 ${\pm}$ 3.82, 0.6 ${\pm}$ 0.15, 20.6 ${\pm}$ 18.78, and 7.0 ${\pm}$ 6.48 mg/kg for Cu, Cd, Pb, and As, respectively, in this study. When the extraction using aqua regia and the Tessier's extraction method were compared, the extracted Cu and Pb concentrations did not show significant differences, whereas the extracted Cd and As concentrations showed significant differences. These results indicate that the portion of Cd and As in the fraction 5 of the Tessier's sequential extraction can not be extracted using aqua regia. Using aqua regia, which is the official test method, higher concentrations of Cu, Cd, Pb and As were extracted than the sum of the fraction 1 and 2. The results show that only 9, 40, 39 and 10% of Cu, Cd, Pb and As using aqua regia can be uptaken by plants (i.e., plant-available). Using 0.1N HCl, the portion of Cd equivalent to about 66% the fraction 1 could be extracted, while, with Pb, the portion of the fraction 1 and about 90% of the fraction 2 could be extracted. With As, the portion equivalent to the fraction 1, 2 and 79% of the fraction 3 was extracted, while with Cu, the portion equivalent to the fraction 1, 2, 3 and 20% of the fraction 4 was extracted using 0.1N HCl.