• 대한방사성의약품학회지
• /
• 제2권1호
• /
• pp.17-21
• /
• 2016

Alkali metal fluoride sources (MFs) such as potassium fluoride (KF) have been widely used as a fluoride source in the nucleophilic displacement reaction. However, they have low solubility and nucleophilicity in most of the organic solvents. Bulky fluoride sources such as tetrabutylammonium fluoride (TBAF) were substituted for MFs to improve these properties. However, hygroscopic property of TBAF makes it less convenient for handling as well as its strong basic property can make the side-reaction occur. Recently, novel fluoride sources have been developed to solve these problems. In this paper, we would like to introduce coordinated fluoride sources as a new fluoride sources such as tetrabutylammonium tetra(t-butyl alcohol)-coordinated fluoride, crown ether metal complex fluoride, and various bulky alcohols coordinated fluoride complexes. In particular, bulky alcohol coordinated fluoride source could generated by the controlled hydrogen-bonded of fluoride with alcohols and these fluoride sources have better stability and reactivity with showing low hygroscopic property. The study of these fluoride sources will help to understand the characteristic of [$^{18}F$]fluoride for increasing the radiochemical yield in the [$^{18}F$]radiofluorination.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.276-277
• /
• 2006

In order to accelerate the sintering of Al-Bronze powder covered with passive oxide film, we focused on the way to add Al-Ca fluoride consisting of $AlF_3$ and $CaF_2$, examined the effect of the $CaF_2$ mixing rate in Al-Ca fluoride, the amount of the added Al-Ca fluoride and the sintering temperature on sintering properties of Al-Bronze powder and considered the mechanism of the sintering acceleration. Al-Bronze powder was sintered most effectively by adding Al-Ca fluoride with the $CaF_2$ mixing rate of 20mass%. If the amount of added fluoride was over 0.05mass% and the sintering temperature was over 1123K, the sintering acceleration of the Al-Bronze powder appears. Regarding the mechanism of the sintering acceleration, it was presumed that $Al_2O_3$ film on the surface of the Al-Bronze particles was removed in the process of the formation of gaseous AlOF by the reaction with $AlF_3$, and the reaction was accelerated further by the presence of the liquid phase which is formed in Al-Ca fluoride.

• 한국세라믹학회지
• /
• 제22권3호
• /
• pp.29-34
• /
• 1985

The IR spectra of he heavy metal fluoride glasses showed peaks at $1, 400cm^{-1}$ or $1, 100cm^{-1}$ due to metal oxyfluoride impurities. The intensity of this band and hence the oxide impurity content of the glass could be reduced considerably by the use of reactive atmosphere melting under $CCl_4$ In comparison with the fundamental IR absorption band of heavy metal oxides the oxide impurity bands observed in the heavy metal fluoride glasses are multiphonon bands due to a 2-phonon absorption process. The envelope of the a vs. v curve beyond thue fundamental region shows the exponential fall off of a with increasing v-typical of intrinsic multiphonon absorption. In the multiphonon region the amount of structure is intermediate between that observed for covalent solids and that for ionic solids.

• Korean Chemical Engineering Research
• /
• 제48권5호
• /
• pp.627-631
• /
• 2010

질산 알루미늄과 암모니아 용액을 출발물질로 하고 또한 금속 불화물을 첨가제로 사용하여 $\alpha$-알루미나 입자를 침전법으로 제조하였다. 이 때 제조과정에서 사용된 용매의 영향과 $AlF_3$, $CaF_2$, $MnF_2$ 등의 3 가지 금속 불화물 첨가제가 $\alpha$-알루미나로의 상전이 온도, 입자 크기 및 형태 등에 미치는 영향에 대해 조사하였다. $\alpha$-알루미나 제조시 사용된 용매는 상전이 온도에는 큰 영향을 미치지 않는 반면 입자 크기에 영향을 미쳤다. 첨가제 조성에 따라 $\alpha$-알루미나 상전이 온도가 차이가 났으나($AlF_3(800^{\circ}C)$ < $MnF_2(900^{\circ}C)$ < $CaF_2(950^{\circ}C)$), 첨가제를 사용하지 않은 경우($1,100^{\circ}C$)보다는 모두 상전이 온도가 낮음을 알 수 있었다. 3 가지 첨가제를 사용한 경우 모두 판상의 $\alpha$-알루미나 입자들이 얻어졌으나, 그 중 $MnF_2$를 첨가한 경우에 가장 작은 크기의 $\alpha$-알루미나 입자들이 생성되었다.

• Nuclear Engineering and Technology
• /
• 제53권6호
• /
• pp.1931-1938
• /
• 2021

Uranium ingot is produced by metallothermic reduction of uranium tetrafluoride using magnesium or calcium as reductant. Presence of oxygen containing compounds viz. uranyl fluoride and uranium oxide in the starting uranium fluoride has a significant effect on the firing time, final temperature of the charge, slag-metal separation and hence the metal recovery. As reported in the literature, the maximum tolerable limit for uranyl fluoride in the UF₄ is 2.5 wt% and limit for uranium oxide content is in the range 2-3 wt%. No theoretical or experimental basis is available till date for these limits. Analyses have been carried out in this study to understand the effect of UO₂F₂ concentration in the starting fluoride on the final temperature of the products and thus the reduction characteristics. UF₄ having uranyl fluoride concentration, less than as well as more than 2.5 wt%, have been investigated. Thermodynamic calculations have been carried out to arrive at a general expression for the final temperature attained by the products during calciothermic reduction of UF₄. Finally, an upper limit for the oxygen containing impurities has been estimated using the CaO-CaF₂ phase diagram.

• 대한방사성의약품학회지
• /
• 제3권2호
• /
• pp.116-121
• /
• 2017

To overcome the low reactivity and solubility of alkali metal fluorides (MFs), various types of phase transfer catalysts (PTCs) have been developed over the last decades. However, since the fluoride activated by such PTC sometimes has a strong basicity, it may cause various side reactions such as elimination reaction or hydroxylation reaction in the nucleophilic fluorination reaction. Also, they may cause separation problems in the compound purification process. In recent advanced study, various PTCs have been developed to solve these problem of conventional catalyst. In this review, we would like to introduce three kinds of novel multifunctional organic catalysts such as bis-tert-alcohol-functionalized crown-6-calix[4]arene (BACCA), easy separable pyrene-tagged ionic liquid (PIL) by reduced graphene oxide (rGO), and tri-tert-butanolamine organic catalyst.

• 한국연초학회지
• /
• 제23권2호
• /
• pp.141-148
• /
• 2001

Insecticidal effect or sulfuryl fluoride ($SO_2F_2$) to cigarette beetle, Lasiodema serricorne (F.), was studied in two different containers, one was 1m$^3$(without cardboard block) and the other was 0.5m$^3$(with cardboard block). Adults and larvae were transferred into a small metal can before placed in the containers. Each can was held for 8, 24, 48, 72, and 96 hours after $SO_2F_2$(10, 20, 30, and 40 g/$\ell$) treatment. All adults were killed in an 1m$^3$container. Larval mortality was 99 to 100% when the dosage of SO$_2$F$_2$was 10 and 20 g/$\ell$. Cardboard was attached between two 0.5m$^3$ containers ; one was fumigation area and the other was insect area. SO$_2$F$_2$ penetrated cardboard within 24 hours in most trials. $SO_2F_2$could affect all adults and larvae regardless of their susceptibility. All adults were killed at 8 hours in a 0.5m$^3$ container. But low mortality of larvae was recorded at 8 hours when small dosage was treated (30% in 10 g/$\ell$, 87.2% in 20 g/$\ell$). The mortality was increased as SO$_2$F$_2$ dosage increased. Six different metals (stainless, copper, brass, aluminum, iron, and zinc) were also tested to study metal corrosion and discoloration. No corrosion and discoloration was observed in most metals treated with $SO_2F_2$.

• 한국물환경학회지
• /
• 제23권3호
• /
• pp.314-318
• /
• 2007

The feasibility of the employment of waste oyster shell as an adsorbent for fluoride ion has been tested by considering the effect ionic condition on the adsorption of fluoride ion on oyster shell. The adsorption capacity of oyster shell for fluoride ion was found not to be significantly influenced by the ionic strength of aqueous environment. The existence of complexing agent such as nitrilotriacetic acid in wastewater decreased the adsorbed amount of fluoride ion by forming a stable complex of $CaT^-$ and the adsorption reaction of fluoride ion on oyster shell was examined to be endothermic. The coexisting heavy metal ionic adsorbate in wastewater hindered the adsorption of fluoride ion, however, its adsorbed amount was increased as the particulate size of adsorbent was decreased. Finally, a serial adsorption column test has been conducted for a practical application of adsorption process and the breakthrough of the column adsorption was observed in 22 hours under the experimental condition.

• 한국세라믹학회지
• /
• 제26권5호
• /
• pp.601-608
• /
• 1989

Electrical properties of ZrF4-based heavy metla fluoride glasses were measured by the ac complex impedance method. The effects of alkali and chloride ions addition into fluoro zirconate glasses on the electrical conductivity were examined. The electrical conductivities of fluoride glasses show Arrhenian behavior in the temperature range of the experiment and were decreased by the addition of sodium fluoride up to 15mol%. Mixed alkali substitution resulted in conductivity minimum at intermediate composition which is commonly observed as mixed alkali effect' in alkali oxide glasses. Chloride ion substituted for fluoride ion was found to lower the conductivity.

• 한국해양공학회지
• /
• 제33권6호
• /
• pp.615-619
• /
• 2019

Various fluorides, i.e., CaF₂, Na₃AlF₆, K₂SiF₆, MnF₃, MgF₂, were added to the flux cored wire, and their effects on the oxygen content of the weld metal were investigated. The investigation showed that the oxygen content of weld metal was not influenced by the type of metallic elements in the fluoride; rather, it was influenced by the stability of the arc during welding. While the wire containing MgF₂ showed the most stable arc and the least amount of oxygen in the weld metal, the wire containing MnF₃ showed the least stable arc and the greatest amount of oxygen. Since the deoxidation of the weld metal was not affected by the deoxidation elements, such as Ca and Mg, it was possible to predict the oxygen content of the weld metal by the equilibrium Si-Mn deoxidation thermodynamic model.