• 한국수소및신에너지학회논문집
• /
• 제18권2호
• /
• pp.124-131
• /
• 2007

Methane is partially oxidized to produce the syngas by the lattice oxygen of metal oxides in the absence of gaseous oxygen. The present work deals with ferrite including copper component, which does not chemisorb methane, to investigate the suppression of the carbon deposition during the reduction of metal oxides by methane. Iron-based oxides of $Cu_xFe_{3-x}O_4$(X=0.25, 0.5, 1.0) was synthesized by the co-precipitation method. Thermogravimetric Analysis(TGA) was used to observe the isothermal reduction behavior of $Cu_xFe_{3-x}O_4$ and $Fe_3O_4$ at $600-900^{\circ}C$ under methane atmosphere. The crystal structures of reduced specimens were characterized by X-rays powder diffraction(XRD) technique. From the analyses of TGA, it is concluded that the reduction kinetics of $CuFe_2O_4$ was the fastest among $Fe_3O_4$ and $Cu_xFe_{3-x}O_4$(X=0.25, 0.5, 1.0). The X-ray diffraction analyses indicated that $Cu_xFe_{3-x}O_4$ was decomposed to Cu and $Fe_3O_4$ phase at $600^{\circ}C$ and was reduced to Cu and Fe phase at $800^{\circ}C$. $Fe_3O_4$, which was reduced at $900^{\circ}C$, showed Fe, graphite and $Fe_3C$ phases. On the contrary, $Cu_xFe_{3-x}O_4$ does not show the graphite or $Fe_3C$ phases. This results infer that Cu component suppress the carbon deposition on Cu-ferrite.

• 대한금속재료학회지
• /
• 제48권12호
• /
• pp.1090-1096
• /
• 2010

This pitting corrosion study of welded joints of austenitic stainless steels (AISI 304L and 316L) has addressed the differentiating solidification mode using three newly introduced filler wires with a flux-cored arc welding process (FCAW). The delta ferrite (${\delta}$-ferrite) content in the welded metals increased with an increasing equivalent weight ratio of chromium/nickel ($Cr_{eq}/Ni_{eq}$). Ductility dip cracking (DDC) was observed in the welded metal containing ferrite with none of AISI 304L and 0.1% of AISI 316L. The potentiodynamic anodic polarization results revealed that the $Cr_{eq}/Ni_{eq}$ ratio in a 3.5% NaCl solution didn't much affect the pitting potential ($E_{pit}$). The AISI 316L welded metals with ${\ddot{a}}$-ferrite content of over 10% had a superior $E_{pit}$ value. Though the AISI 316L welded metal with 0.1% ferrite had larger molybdenum contents than AISI 304L specimens, it showed a similar $E_{pit}$ value because the concentration of chloride ions and the corrosion product induced severe damage near the DDC.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2016년도 자성 및 자성재료 국제학술대회
• /
• pp.118-118
• /
• 2016

• 동력기계공학회지
• /
• 제14권2호
• /
• pp.71-77
• /
• 2010

This paper was studied on microstructure, mechanical properties and corrosion characteristics of 316L stainless steel pipe welds was fabricated by orbital welding process. S-Ar specimen was fabricated by using Ar purge gas and S-$N_2$ specimen was fabricated by using $N_2$ purge gas. Ferrite was not detected in weld metal of S-$N_2$ specimen but the order of 0.13 Ferrite number(FN) was detected in weld metal of S-Ar specimen. Oxygen and Nitrogen concentration of S-$N_2$ specimen was higher than S-Ar specimen on HAZ and inner bead. The welds microstructural characteristics of S-Ar and S-$N_2$ specimens are similar. The microvickers hardness values of S-Ar and S-$N_2$ specimens welds were similar and average values of each regions were in the range of 174~194. The microstructures of S-Ar and S-$N_2$ weld metal were full austenite by primary austenite solidification. The Solidification structures of S-Ar and S-$N_2$ weld metal were formed directional dendrite toward bead center. The potentiodynamic polarization curve of STS 316L pipe welds exhibited typical active, passive, transpassive behaviour. Corrosion current density$(I_{corr.})$ and corrosion rate values of S-Ar specimen in 0.1M HCl solution were $0.95{\mu}A/cm^2$ and $0.31{\mu}A$/year respectively. The values of S-$N_2$ specimen were $1.4{\mu}A/cm^2$ and $0.45{\mu}m$/year.

• 한국레이저가공학회지
• /
• 제2권3호
• /
• pp.42-51
• /
• 1999

This research was conducted as a fundamental study to apply tailored blank welding technique into automotive production process. The materials used in this study were 2.0mm thickness low carbon steel sheets and 1.2mm Zn-coated low carbon steel sheets. To ensure the reproducibility and to consider various factors, experiments were. conducted by applying Taguchi experimental method with 6 factors. Every welding process was repeated 3 times to offset the effect of uncontrolled factors. Elongation and LDH(Limited Dome Height)were measured to evaluate formability of specimens and Optical microscopy, XRD, SEM, and EDS analysis were performed to observe the microstructures and to determine the solidification mode in the weld. The elongation of specimen welded with optimum condition was 83% of base metal, and LDH was 84% of base metal. In case of laser treated specimen where Zn coating was removed, elongation was 85% of base metal, and LDH was 85% of base metal. In fusion zone, phases were consisted of quasi-polygonal ferrite, banitic ferrite, and martensite.

• Journal of Welding and Joining
• /
• 제15권1호
• /
• pp.46-54
• /
• 1997

The object of this paper is to evaluate SCC(stress corrosion cracking) susceptibility for parent metal and bond line region of weld joints which have the various weld heat input condtions in TMCP(thermo-mechanical control process) steel by SP-SSRT(small punch-slow strain rate test) method. And the SCC test results of TMCP steel are compared with those of the conventional HT50 steel which has te almost same tensile strength level like TMCP steel. The loading rate used was $3\times10^{-4}$mm/min and the corrosive environment was synthetic sea water. According to the test results, in the case of parent metal, TMCP steel showed higher SCC susceptibility than HT50 steel because of the high plastic strain level of ferrite microstructure obtained by accelerated cooling. And in the case of bond line, the both TMCP steel and HT50 steel showed low load-displacement behaviors and higher SCC susceptibility above 0.6. These results may be caused by theembrittled martensite structure on HT50 steel and by the coarsened grain and the proeutectoid ferrite structure obtained by the impart of accelerated cooling effect on TMCP steel.

• Journal of Welding and Joining
• /
• 제24권1호
• /
• pp.77-87
• /
• 2006

Considering ferrite grain size in the base metal, the prediction model for $A_{c3}$ temperature and prior austenite grain size at just above $A_{c3}$ temperature was proposed. In order to predict $A_{c3}$ temperature, the Avrami equation was modified with the variation of ferrite grain size, and its kinetic parameters were measured from non-isothermal data during continuous heating. From calculation using a proposed model, $A_{c3}$ temperatures increased with increasing ferrite grain size and heating rate. Meanwhile, by converting the phase transformation kinetic model that predicts the ferrite grain size from austenite grain size during cooling, a prediction model for prior austenite grain size at just above the $A_{c3}$ temperature during heating was developed.

• 자원환경지질
• /
• 제36권5호
• /
• pp.381-385
• /
• 2003

본 연구는 폐산화철을 이용한 폐수 중금속 제거 가능성을 알아보고자 시도되었다. 실제 폐수와 폐산화철을 적용하기에 앞서 상업적으로 구입가능한 Mn-ferrite를 이용하여 실내 회분식 시험을 통한 흡착실험을 실시하여 pH, 접촉시간, 중금속 농도 및 온도 등과 같은 다양한 흡착 조절인자들을 이용하여 페라이트에 의한 Cd과 Pb의 흡착 및 제거특성을 알아보았다. 접촉시간을 1에서 360분까지 변화하여 흡착속도를 측정하였으며 일정온도에서 Cd와 Pb의 농도를 변화시켜 흡착등온선을 구하였다. 또한 온도(15∼35$^{\circ}$)와 pH(4∼10) 변화에 따른 흡착특성 변화를 고찰하였다. Cd과 Pb는 Freundlich 식에 잘 맞았으며 Cd에 비하여 Pb가 더 흡착이 잘 되었다. pH가 높을수록 Cd와 Pb가 더 잘 흡착되었으며 이는 pH증가에 따라 수소이온 농도가 감소하고 결과적으로 표면의 흡착가용 장소가 증가하기 때문인 것으로 생각된다. 같은 pH에서 원소의 농도가 증가할 때 흡착이 더 잘 일어났다. 온도 역시 Pb와 Cd의 흡착능에 영향을 미쳤으며 Pb의 경우 온도가 증가할수록 흡착정도가 높아지는 반면 Cd의 경우 덜 흡착이 되었다. Cd는 Pb에 비하여 더 온도에 영향을 받으며 이러한 Cd와 Pb의 흡착특성 차이는 Cd에 비하여 Pb가 더 hard한 특성 때문인 것으로 생각된다. 본 연구는 폐산화철을 이용하여 각종 폐수 중금속을 제거하는 공정에 사용될 수 있음을 시사한다.

• Journal of Welding and Joining
• /
• 제30권4호
• /
• pp.49-54
• /
• 2012

The microstructure and mechanical properties of the high-strength low-alloy steel weld metals with a variation of nickel content were investigated. The weld metals with a variation of nickel content from 2.3 to 3.3 wt% were prepared using Gas Metal Arc Welding process. The amount of acicular ferrite decreased with increasing nickel content; this is accompanied with an increase in the region of bainite and martensite, hence the hardness and tensile strengths were increased with the increase in nickel content, whereas the impact energy was deteriorated.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 1994년도 추계연구발표회 논문개요집
• /
• pp.70-71
• /
• 1994