• 기술사
• /
• 제16권3호
• /
• pp.68-73
• /
• 1983

IC전자부품 중 DIP계 종류를 바렐을 사용하여 주석도금 할 때에 그 전착현상을 조사하여 부분전류의 동태를 설명할 수 있는 변화인자를 알아보려 하였다. DIP와 같은 모양인 IC부품은 부분전도체로 구분되어지며 그 전착상태를 one-dimensional model로 분석하였을때, 가입전류밀도, 바렐의 회전속도, 용액중 금속이온 농도와 깊은 관계가 있음을 보인다. 다공질과 같은 것으로 간주한 one-dimensional model로서 의 이론식은 J=$\delta$'/$\beta$-{-c$^3$/${\gamma}$-exp-(1-$\alpha$)n$\Phi$}로 표현된다.

• International Journal of Korean Welding Society
• /
• 제4권1호
• /
• pp.23-29
• /
• 2004

In weaving welding where a V groove exists, the heat input distribution is an important factor that determines the defectiveness of the bead shape, undercut and over-lap. In this study, the amount of heat input, which is determined by the welding current, voltage, speed and weaving conditions is calculated through mathematical development and numerical methods. Furthermore, the heat input distribution as a two- dimensional heat source was observed when applied to each groove.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.704-705
• /
• 2006

Discrete element analysis is used to map various log-normal particle size distributions into measures of the in-sphere pore size distribution. Combinations evaluated range from monosized spheres to include bimodal mixtures and various log-normal distributions. The latter proves most useful in providing a mapping of one distribution into the other (knowing the particle size distribution we want to predict the pore size distribution). Such metrics show predictions where the presence of large pores is anticipated that need to be avoided to ensure high sintered properties.

• 한국물환경학회지
• /
• 제18권4호
• /
• pp.341-354
• /
• 2002

Heavy metal concentration/distribution in sediments and bivalves from the tidal flats in Saemankeum coastal area, western Korea, were investigated, Among 6 sampling sites, S2, S5 and S6 showed the higher levels of Zn, Cr, Ni, Cu and Cd contamination and S1 did the higher level of Pb contamination than other sites, while S-4 showed the lowest levels of these metal contamination. Overally, the levels of Zn, Cu and Pb concentrations in Sinonovacula constricta were estimated to be relatively high. The shell lengths of the collected mussels were linearly related to their dry weights of the whole soft parts, but the mussels collected from S3 were in a poor nutrition, resulting in the distinctively high levels of metal concentrations in the body. It was shown that in S. constricta, Cr, Ni, Cu and Zn are distributed equally into the whole soft parts or a little more into the flesh, after absorption, while Fe, Cd, Pb and Mn are transferred more into the non-flesh parts than into the flesh parts. In S. constricta, the heavy metal concentrations in the flesh increase with those in the whole soft parts. The bioaccumulation factors(heavy metal concentration in S. constricta/heavy metal concentration in sediment) showed that, of the examined metals, Cd is the most cumulative in the body of S. constricta, followed by Zn and Cu, while Mn, Cr, Ni and Pb are not cumulative.

• 멤브레인
• /
• 제24권6호
• /
• pp.472-483
• /
• 2014

본 연구는 거대고리 금속 이온 착화합물과 유도체를 이용하여 미세 다공성 구조를 가지는 분리막의 제조에 관한 것이다. 고분자와 금속이온 리간드 착물 시스템을 이용함으로써 기존의 방법들에 비해 상 전이 과정을 보다 정교하게 제어할 수 있었다. 금속염, cyclohexanedione dioxime, hydroxyphenylboronic acid와의 축합 반응을 통하여 금속 clathrochelate 착물을 얻을 수 있었다. PES, PVP, BE와 금속 clathrochelate 착물을 DMF에 녹인 후 비용매 유도 상 전이법을 통하여 유무기 혼성고분자막을 제조하였다. 제조된 분리막의 구조는 FE-SEM과 microflow permporometer로 조사하였다. p-Hydroxyphenyl group을 가지는 Fe(II) clathrochelate 착물의 첨가는 분리막의 구조에 있어 기공 크기 분산도를 좁혀주고, 표면의 기공 밀도를 높여 주었으며 최대 기공 크기를 감소시킴을 볼 수 있었다.

• 한국토양비료학회지
• /
• 제48권4호
• /
• pp.278-284
• /
• 2015

In general, plant roots accumulate more heavy metals than the above ground organs such as leaf, stem, and fruit. This implies that root medicinal plants would be an issue with excessive heavy metal accumulation. Therefore, the current study was carried out to investigate the distribution of heavy metal (focused on Cd and Pb) concentrations in soils and medicinal plant roots grown in different region of Korea. Total 293 samples for each soil and plant were collected along the national wide. Soil pH, total and phytoavailable metal concentrations (1 M $NH_4NO_3$ extracted) in soils were determined and heavy metal concentrations in root of the medicinal plants were analyzed. Heavy metal concentrations of the soil samples studied were not exceeded standard limits legislated in 'Soil Environmental Conservation Act', except 2 samples for Cu. However, substantial amount of Cd was accumulated in medicinal plant roots with 29% samples exceeding the standard limit legislated in 'Pharmaceutical Affairs Act' while all plant samples were lower than the standard limit value for Pb. Also the current study demonstrated that cadmium concentrations in the roots were governed by the phytoavailable Cd in soils, which decreased as soil pH increased. From this result, application of heavy metal immobilization technique using a pH change-induced immobilizing agents can be suggested for safer root medicinal plant production.

• Journal of applied mathematics & informatics
• /
• 제7권2호
• /
• pp.507-516
• /
• 2000

In the present paper we consider a problem of choosing the rational way to carry on the metal processing (the problem of stochastic optimization) and the problem of determing the unknown characteristics of parameters described with random variables.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 E
• /
• pp.2117-2119
• /
• 1999

In this paper, the electric fields inside GIS with metal impurity is analysed by the use of 3 dimensional Surface Charge Method. We find the metal impurity makes electric field distribution inside GIS non-uniform and causes breakdown of $SF_6$ gas in GIS.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 E
• /
• pp.2329-2331
• /
• 1999

Metal oxide surge arrester were developed in the late 1970s, and were immediately adopted as significant breakthrough in over voltage protection of power system. Work was continued throughout the world on the design, development and application of metal oxide surge arrester. This paper describes the evaluating test and results of practical use for analyzing the performance of gapless metal oxide surge arresters under various type test.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1998년도 창립기념 춘계학술대회 논문집
• /
• pp.474-481
• /
• 1998

Metal bonded rubber spring is used in primary suspension component of the high speed train. The aim of this study is to establish a finite element analysis technique for the metal bonded rubber spring. Some theoretical analyses were performed on the hyperelastic behavior in rubber material and test are carried out to acquire the constants in strain energy function for it. Also, finite element analysis were executed to evaluate the design parameter and behavior of deformation and stress distribution using by the commercial finite element code.