• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2017년도 임시총회 및 하계학술연구발표회
• /
• pp.217-217
• /
• 2017

• Ocean and Polar Research
• /
• 제35권2호
• /
• pp.69-83
• /
• 2013

시화호 내측 퇴적물 내 미량속의 오염원을 규명, 퇴적물 내 미량금속의 분포 특성 및 오염도를 평가하기 위하여 시화호 유역의 하천수, 반월산업단지 토구 유출수 및 코어 퇴적물 내 미량금속을 분석하였다. 하천수 및 반월산업단지 토구 유출수 내 용존성 미량금속의 평균농도는 시화호 내측 표층수에 비해 6.6~136배 높았으며, 산업단지 유역의 하천이 도심 또는 농업 유역에 비해 상대적으로 높은 농도를 보이고 있어 시화호 내측 미량금속의 주요한 오염원은 시화호 유역에 산재하는 하천과 반월산업단지 토구인 것을 알 수 있었다. 미량금속의 수직분포는 저층에서 표층으로 갈수록 농도가 증가하고 있으며 반월산업단지 인근 지역에서 미량금속의 농도가 매우 높은 것으로 나타났다. 농집지수(geo-accumulation index)를 이용한 퇴적물 내 미량금속의 오염도 평가는 산업단지 인근이 다른 조사지역에 비해 상대적으로 오염되었으며 특히 Cu, Zn 및 Cd의 오염도가 매우 심각한 수준으로 나타났다. 우리나라 해저퇴적물의 주의기준(TEL)과 관리기준(PEL)과의 비교를 통하여 퇴적물 내 미량금속 농도가 해양생물에 미치는 영향 및 독성을 파악한 결과, 반월산업단지 인근 지역에서 Cu, Zn, Cd 및 Pb이 PEL을 초과하였으며 Cr과 Ni 역시 외국의 PEL을 초과하는 것으로 나타났다. 본 연구에서 mPELQ를 이용하여 퇴적물 기준이 존재하는 미량 금속의 종합적인 독성 영향을 평가하였다. mPELQ의 평균은 0.2~2.3의 범위를 나타내었으며 산업단지 인근인 C2와 C3 코어 퇴적물에서의 미량금속 농도가 저서생태계에 대한 독성영향이 우려할 만한 수준으로 나타났다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1247-1250
• /
• 2008

This presentation highlights work from the authors' laboratories on the various kinds of oxide optical materials, mainly luminescence and pigment materials with different forms (powder, core-shell structures, thin film and patterning) prepared by the Pechini-type sol-gel (PSG) process. The PSG process which uses the common metal salts (nitrates, acetates, chlorides etc) as precursors and citric acid (CA) as chelating ligands of metal ions and polyhydroxy alcohol (such as ethylene glycol or poly ethylene glycol) as cross-linking agent to form a polymeric resin on molecular level, allowing the preparation of many forms of luminescent materials.

• 보존과학연구
• /
• 통권17호
• /
• pp.20-38
• /
• 1996

Horse armour from Dohang-ri site had been retained its original form and all iron metal fragments of armour were very completely corroded without remaining metal core. Horse armour excavated is archaeologically very important, Also it should be maintained the original form. So, only moderate treatments such as brushing and consolidation techniques were performed. The processes for the conservation is as follows : 1) preliminary investigation, 2)removal of chlorides and corrosion products, 3) consolidation with 40% ParaloidNAD-10, 4) joining and restoration

• Journal of Magnetics
• /
• 제3권1호
• /
• pp.1-3
• /
• 1998

Valence state of the Sm metal is investigated using the total energy linearized muffin-tin orbital (LMTO) band method for the observed Sm-type crystal structure. We have considered both the relativistic and the semi-relativistic description of 4f-core electrons. We have found that, in the paramagnetic phase of bulk Sm, the trivalent valence state is more stable at the observed lattice constant than the divalent valence state.

• 한국정밀공학회지
• /
• 제23권10호
• /
• pp.80-87
• /
• 2006

Metallic sandwich plate with a truss core has metallic inner structures which have low relative density between a pair of metal skin sheets or face sheets. In this work, low impact tests have been carried out to examine the behavior of sandwich plates with a pyramidal truss core. For the low velocity impact, the impact apparatus of drop weight type has been fabricated. From the results of the experiments, maximum energy absorption is found to happen when the upper sheet fails. The sandwich plate loses its absorption ability as soon as the inner structures have been crashed completely and optimal core thickness has existed to maximize energy absorption. Comparing the metallic sandwich plate with the monocoque plate, the absorbed energy has been improved up to 160 % and the deflection decreased by up to 76%. As a result, the metallic sandwich plate with a truss core is shown to have good material for impact resistance and energy absorption.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.452-452
• /
• 2013

ZnO is one of the most attractive transparent conductive oxide (TCO) films because of low toxicity, a wide band gap material and relatively low cost. However, the electrical conductivity of un-doped ZnO is too high to use it as TCO films in practical application. To improve electrical properties of undoped ZnO, transition metal (TM) doped ZnO films such as Al doped ZnO or Ti doped ZnO have been extensively studied. Here, we prepared Ti doped ZnO thin films by atomic layer deposition (ALD) for the application of TCO films. ALD was used to prepare Ti-doped ZnO thin films due to its inherent merits such as large area uniformity, precise composition control in multicomponent thin films, and digital thickness controllability. Also, we demonstrated that ALD method can be utilized for fabricating highly ordered freestanding nanostructures of Ti-doped ZnO thin films by combining with BCP templates, which can potentially used in the photovoltaic applications.

• Transactions on Electrical and Electronic Materials
• /
• 제6권3호
• /
• pp.110-114
• /
• 2005

We present a micro fluxgate magnetic sensor having solenoid coils and racetrack shaped magnetic core, which was designed to decrease the .operating power and magnetic flux leakage. Electroplated copper coils of $6\;{\mu}m$ thickness and the core of $3\;{\mu}m$ thickness were separated by benzocyclobutane (BCB) having a high insulation and good planarization characters. Permalloy $(Ni_{0.8}Fe_{0.2})$ as a magnetic core was also electroplated under 2000 gauss to induce the magnetic anisotropy. The core had the high DC effective permeability of $\~1,300$ and coercive field of $\~0.1$ Oe. The fabricated fluxgate sensor had the very small actual size of $3.0\times1.7\;mm^2$. The fluxgate sensor with a racetrack shaped core had the high sensitivity .of $\~350$ V/T at excitation condition of 3 $V_{P-P}$ and 2 MHz square wave. When two fluxgates were perpendicularly aligned in terrestrial field, their two-axis output signals were very useful to commercialize an electronic azimuth compass for the portable navigation system.

• 대한기계학회논문집A
• /
• 제31권11호
• /
• pp.1124-1130
• /
• 2007

This paper presents a new way for fabricating sandwich plates with tetrahedral truss cores. The tetrahedral truss cores are manufactured through metal expanding and bending process and then brazed with solid face sheets. The properties of sandwich plates with the tetrahedral truss cores composed of a wrought steel SS41 under compression and shear loading have been investigated. Good agreement is observed between the measured and predicted peak strengths. Comparisons with normalized compressive strength for other cellular metals have indicated that the tetrahedral truss structures outperform aluminum open cell forms and woven core sandwich plates.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전력기술부문
• /
• pp.9-14
• /
• 2001

On the side of that necessity, it is known that the development of Amorphous metal take effects on lowering eddy current loss in a core system. If a amorphous transformer and a motor to which "Amorphous Metal" is applied be widespread, electricity saving should be enormous with the several hundreds billion won of economic effects like cutting the cost of power plants and the unhealthy gases. This paper carried out general evaluation about the characters of Amorphous metal, the expected energy saving effects of a amorphous transformer, the environmental contribution, the increasement of electricity quality, and the features of harmonic.