• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집 방전 플라즈마 유기절연재료 초전도 자성체연구회
• /
• pp.34-37
• /
• 2004

It is well known that Ag-CdO alloy for electrical contactor has been widely used in weak or middle electric current field. But it is necessary to decrease Cd contents without decrease of contactor property because Cd is harmful to human body. The present work has been carried out to investigate effects of Mm (misch metal) addition on the property of Ag-CdO alloy for electrical contactor. As the results of present works, hardness and strength was improved and arc resistance was improved, also, in spite of decrease Cd contents by the Mm addition. It was estimated that Ag-oxide particle was refined by Mm addition.

• 한국식품영양과학회지
• /
• 제29권5호
• /
• pp.758-761
• /
• 2000

This study was performed to investigate the contamination levels of harmful heavy metals that sampled from June. 1 to June. 31, 1999, at 3 areas in Jeonbuk west cost area. The heavy metal contents were determinated by ICPS (Inductively Coupled Plasma Spectrometer) method. The levels of total lead, cadmium, aluminum, zinc and copper were determined and the results were summarized as follows: The minimum and maximum values (ppm) of 3 areas of shellfishes (shortneck clam, hard clam, cockle clam, snail and top sell) were Pb: 1.29~4.35, Cd:0.12~0.37, Al: 9.45~54.06, Zn: 9.65~15.14, Cu: 0.62~1.64 ppm.

• 한국해양공학회지
• /
• 제26권2호
• /
• pp.33-38
• /
• 2012

The effects of the diffusible hydrogen content and hardness on the cold cracking in high strength weld metal were investigated. The diffusible hydrogen contents were influenced by welding parameters such as the voltage and contact tip-to-work distance (CTWD). The diffusible hydrogen content increased with an increase in voltage. However, it was decreased with an increase in CTWD. CTWD also influenced the weld metal hardness,especially when the wire used had a higher strength than the base metal. This showed that weld metal hardness had a more powerful effect on weld metal cold cracking than the diffusible hydrogen content in this experiment.

• 환경영향평가
• /
• 제13권5호
• /
• pp.251-262
• /
• 2004

In order to investigate the geochemical characteristics of surface sediments in lower Yeongsan river system, sediment samples from the main stream of Yeongsan river, Gomakwon and Hampyeong streams were collected and analyzed for grain size and metal and organic carbon contents. The sediment types of the streams widely vary from pebble to mud. The metal contents in the sediments are mainly dependent on grain size of the sediments, geology around the streams and organic matter contents from the domestic sewage. Enrichment factor (EF) representing the degree of metal contamination in the sediments are relatively low in the study area. But, high Zn and Pb values seem to be from the study area, partly.

• 한국주조공학회지
• /
• 제27권4호
• /
• pp.153-158
• /
• 2007

Molten metal flow in vacuum die casting was characterized by a numerical analysis. The VOF method was used to simulate the filling behaviors of molten metal during filling process. The various vacuum degrees of no vacuum(760 mmHg), 650, 500, 250 and 60mmHg were artificially applied in cavity. And the filling behaviors of molten metal with the applied vacuum conditions were simulated and compared with those of experiment. The results showed that molten metal was partially filled into cavity when vacuum was applied and the filling length of molten metal in cavity was increased with increasing applied reduced pressure in cavity. Also, the simulated filling behaviors of molten metal were apparently similar to those of experiment, indicating the numerical analysis developed in this study was highly effective. Through the result of fluid flow simulation, both relation equations of filling length and filling velocity with the variation of pressure conditions in cavity were calculated respectively and the internal gas contents of casting was significantly reduced by the modification of vacuum gate system.

• Journal of Welding and Joining
• /
• 제34권2호
• /
• pp.46-53
• /
• 2016

Effect of heating rate on microstructure of brazed joints with STS 304 Printed Circuit Heat Exchanger (PCHE),which was manufactured as large-scale($1170(L){\times}520(W)){\times}100(T)$, mm), have been studied to compare bonding phenomenon. The specimens using MBF 20 was bonded at $1080^{\circ}C$ for 1hr with $0.38^{\circ}C/min$ and $20^{\circ}C/min$ heating rate, respectively. In case of a heating rate of $20^{\circ}C/min$, overflow of filler metal was observed at the edge of a brazed joints showing the height of filler metal was decreased from $100{\mu}m$ to $68{\mu}m$. At the center of the joints, CrB and high Ni contents of ${\gamma}$-Ni was existed. For the joints brazed at a heating rate of $0.38^{\circ}C/min$, the height of filler was decreased from $100{\mu}m$ to $86{\mu}m$ showing the overflow of filler was not appeared. At the center of the joints, only ${\gamma}$-Ni was detected gradating the Ni contents from center. This phenomenon was driven from a diffusion amount of Boron in filler metal. With a fast heating rate $20^{\circ}C/min$, diffusion amount of B was so small that liquid state of filler metal and base metal were reacted. But, for a slow heating rate $0.38^{\circ}C/min$, solid state of filler metal due to low diffusion amount of B reacted with base metal as a solid diffusion bonding.

• 약학회지
• /
• 제25권3호
• /
• pp.89-99
• /
• 1981

This study was performed to investigate the contamination level of heavy metals in freshwater flshes. The samples of 92 cases were collected at 7 areas located on HanRiver from November to December in 1980. Contents of heavy metals: cadmium, lead, copper, chromium and zinc were analyzed by atomic absorption spectrophotometry. The results were as follows: 1. Generally mean value of the heavy metal contents of fishes collected on lower parts of Han River were higher than those of upper parts. 2. In the cadmium contents, the highest value was $20.52{\pm}5.10$ ppb in Carassius auratus, and the values at Hannam and Noryangjin area were higher than those at other parts on Han River. 3. In the lead contents, the highest was $0.29{\pm}0.03ppm$ in Carassius auratus and that in Parasilurus asotus was the lowest $0.12{\pm}0.02ppm$ Mean contents of lead in the samples of Hannam and Haengjue area were higher than those of other area 4. In the copper contents, the highest value was $3.13{\pm}0.34ppm$ in Carassius auratus and the contents of fishes of Haengjue area was higher than those of any other area. It was significant among the species, but not among the collecting areas in copper contents. 5. In the chromium contents, the highest was $1.16{\pm}0.12ppm$ in Carassius auratus and that in Parasilurus asotus was the lowest $0.21{\pm}0.01ppm$ The contents of samples of Hannam and Noryangjin area were also higher than those of other area. 6. In the zinc contents, that in Arassius auratus was the highest value with $14.06{\pm}1.13ppm$ and that in Parasilurus asotus was the lowest $4.79{\pm}0.53ppm$. On the other hand, it was significant among the species and collecting areas. 7. Accumulation of heavy metals in freshwater fishes is tended to increase with growth.

• 동력기계공학회지
• /
• 제15권1호
• /
• pp.45-50
• /
• 2011

The effect of Mn and Ti contents in filler wire on the microstructure and mechanical property of weld metal has been investigated after hybrid welding with ultra fine grained (UFG) steel. The microstructure and distribution of alloy compositions at the top region of weld zone were quite different with those at the bottom region after hybrid welding. The bottom region of weld zone contained higher Mn and Ti contents, and consequently the hardness of bottom region was higher than that of top region. With the increase of Mn and Ti contents in filler wire, the volume percent of acicular ferrite in weld metal decreased, and the weld zone showed higher hardness and better impact property.

• 한국환경보건학회지
• /
• 제10권1호
• /
• pp.33-45
• /
• 1984

In order to investigate the pollution of heavy metal in soil, chinese cabbage and radish collected from Singal interchange (highway area), Anyang stream, Jungryang stream (stream basin) and Chunchun dong, Suweon (non-polluted area), this study was carried out from July to October in 1983. The contents of cadmium, copper, lead, and zinc were determined by atomic absorption spectrqphotometry. Generally in soil, the contents of heavy metals in highway area were lower than that in Anyang stream and Jungryang stream, but higher than that in non-polluted area. (Chunchun dong, Suweon). The vegetable samples of highway area were more polluted compared with that of Chunchun dong, Suweon. The contents of heavy metals in radish were higher than that of chinese cabbage and radish leaves were more polluted than roots.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 1999년도 Proceedings of the 1999 Annual Conference The Korean Society of Agricutural Engineers
• /
• pp.651-656
• /
• 1999

This study was carried out to investigate the paddy soil and water quality in Boryung freshwater reservoir watershed during the non-cropping season. Soil pH of the Boryung freshwater reservoir watershed were 5.39∼5.78. Total-N and P contents were high by the accumulation of chemical fertilizer partly. Heavy metal content of paddy soils were natural background level. Water pH of the Boryung freshwater reservoir watershed ranged from 6.82 to 8.64. Total-N content affected by a livestock wastes and sewage water were the higher than that of others and total-P content showed below 0.1mg/L. Nitrate nitrogen contents was very high according to the influence a livestock waste and sewage water partly. Heavy metal contents of wateers were natural background level.