• Journal of Technologic Dentistry
• /
• v.23 no.2
• /
• pp.203-210
• /
• 2002

This test is to conduct applied research the reaction area of the Ti-cast metal body which is made use of Dental Phosphate-silica alumina bonded investment material selling at a market, and the cooling method is how to effect on the acicular. The experimentation is as followings, 1. Experimental specimens After invest with Dental Phosphate-silica alumina bonded investment material, the $10{\times}10{\times}1.0mm^3$ wax pattern was casted by Dental high vacuum argon centrifugal casting machine. 2. Test We can analyze SEM/EDS, XRD utilize the fractography(an optical microscope). 3. Conclusion The pure cast metal body constituted of reaction products layer, stability layer and contamination layer. This pure cast have no connection with the cooling condition. The pure Titanium shows difference in a component distribution according to the cooling condition. Through this experimentation we can establish that acicular in the pure Ti-cast metal is consist of Hexagonal structure a=2.9505$\AA$, c=4.6826$\AA$.

• Journal of Environmental Health Sciences
• /
• v.45 no.6
• /
• pp.561-568
• /
• 2019

Objectives: The most commonly detected heavy metals in rocks and soils, including Pb, Cd, Cu, Fe, Mn and As, are representative pollutants discharged from abandoned mines and have been listed as potential sources of contamination in drinking water. This study focused on increasing the removal efficiency of heavy metals from drinking water resources by surface modification of natural adsorbents to reduce potential health risks. Methods: Iron oxide coating and graft polymerization with zeolites and talc was conducted for bipolar surface modification to increase the combining capacity of heavy metals for their removal from water. The removal efficiency of heavy metals was measured before and after the surface modification. Results: The removal efficiency of Pb, Cu, and Cd by surface modified zeolite showed 100, 92, and 61.5%, respectively, increases compared to 64, 64, and 38% for non-modified zeolite. This implies that bipolar surface modified natural adsorbents have a good potential use in heavy metal removal. The more interesting finding is the removal increase for As, which has both cation and anion characteristics showing 27% removal efficiency where as non-modified zeolite showed only 2% removal. Conclusions: Zeolite is one of the most widely used adsorptive materials in water treatment processes and bipolar surface modification of zeolite increases its applicability in the removal of heavy metals, especially As.

• Journal of the Korean Chemical Society
• /
• v.55 no.6
• /
• pp.1018-1023
• /
• 2011

Alzinc is a ursine situated in the Ghazaouet town western part of the republic of Algeria. The purpose of this study was to determine the degree of contamination which soil and plants are burdened with some heavy metals: Pb, Zn, Ni, Cu, Cd, Mn, Cr, Fe and As, then the accumulation of heavy metals in the soil and plant adjacent of area the alzinc ursine was detected and the interdependence of pollution among all three regions of the environment determined. This paper analyzes the heavy metal contents within a 2-years period in the soil and plants at the beginning of the vegetation period. The presence of Pb, Zn, Ni, Cu, Cd, Mn, Cr, Fe and As, in the samples were analyzed using Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES). Measurements of heavy metal contents were performed at three locations in soil and vegetative parts of three-plant types (plant alimentary) period during summer. The plant samples from the immediate environment of the dumpsite were highly contaminated with Zn, Cd and Mn. Three plants species: grape, artichoke and pepper, particularly, grape met some of the conditions to be classified as accumulators for Zn, Cu, Cd and Fe, consequently, she revealed a health risk for human and livestock due to the spread of the metal pollution from waste dumpsites to agricultural areas.

• Journal of Environmental Health Sciences
• /
• v.26 no.2
• /
• pp.116-121
• /
• 2000

This study was performed to investigate the heavy metal contents and distribution in bioorganisms from the estuary area of Mankyeong-Dongjin river. In paddy plant, the average contents of heavy metals were in order of Zn>Cu>Pb>Cr>Cd in all parts. Those of Cd, Cr, Pb and Cu were all highest in the leaf while lowest in the brown rice. The average content of Zn was almost similar in all parts. In the dried muscular parts of shellfish, the average contents of heavy metals were in the range of 1.06~1.95 mg/kg for Cd, 2.93~4.98 mg/kg for Cr, 0.90~1.17 mg/kg for Pb, 8.41~18.58 mg/kg for Cu and 29.81~67.31 for Zn, respectively, In fish(Acanthogobius hasta), the average contents of heavy metals in the dried body parts were in the range of 0.05~0.43 mg/kg for Cd, 0.65~4.59 mg/kg for Cr, 1.01~4.75 mg/kg for Pb and 1.34~4.19 mg/kg for Cu, with high accumulation in bone and head overally.

• Journal of Korean Society of Water Science and Technology
• /
• v.26 no.6
• /
• pp.43-51
• /
• 2018

In order to systematically and scientifically manage the organic and heavy metals against sediment at Daecheon Port, this study conducted particle composition, organic materials and heavy metals irradiation studies of sediments. Analysis of the grain size composition of sediments in the target study area showed the distribution characteristics of the mix of sand, silt and clay. That is, Station C (Stn. C) showed superior by fine-grained sediment, Station A and B (Stn. A and B) showed superior by coarse-grained sediment. The organic matter(COD, TOC, and IL) of Stn. C was appeared to be heavily polluted more than Stn. A and B. These data for the spatial properties in sediment showed that organic matter was related positively to the sediment silt-clay content. Also, in the case of heavy metals contamination in surface sediments, Stn. C was higher than Stn. A and B. Particularly, at the Stn. C, high organic matter concentration and C/N ratio value( >10) indicated that the sediment was composed highly of land-derived organic matter. From these results, it considered that the correlation analysis among to silt-clay, organic matter and heavy metal was found to have a good interrelationship.

• Journal of Industrial Technology
• /
• v.43 no.1
• /
• pp.25-31
• /
• 2023

Stretchable and flexible electronics that comply with dynamic movements and micromotion of the human tissues can enable real-time monitoring of physiologic signals onto the human skin and in the brain, respectively. Especially, gallium based liquid metal stretchable electronics can offer human-interactive biosensors to monitor various physiologic parameters. However, the liquid-like nature, surface oxidation and contamination by organic materials, and low biostability of the liquid metals have still limited the long-term use as bioelectronics. Here we introduced electrochemical deposition without oxidation pathways to overcome these practical challenges in liquid metal bioelectronics. CNT/PDDA composite with reduction way and PEDOT:BF₄ with oxidation way under organic solvent are suggested as rationally designed material engineering approaches. We confirmed that the structures with the soft, flexible, and stretchable liquid metal platform can successfully detect dopamine with a high sensitivity and selectivity, record neural signals including action potentials without scar formation, and monitor physiologic signals such as EMG and ECG.

• Fisheries and Aquatic Sciences
• /
• v.27 no.2
• /
• pp.66-75
• /
• 2024

Heavy metals are naturally found in the ecosystem, and their presence in the freshwater river is increasing through anthropogenic activities which pose a threat to living beings. In this study, heavy metal concentrations (Zn, Mn, Cu, Cd, Cu, Cr, Pb, and Ni) in different organs (muscle, skin, and gill) of fish from the Padma River were evaluated to quantify, and compare the contamination levels and related human health risks. The results revealed that the heavy metal concentrations in the water, surface sediments, and fish taken from the Padma River were far below the WHO/USEPA's permitted limits. The estimated daily intake (EDI) value in muscle was less than the tolerable daily intake (TDI). The target hazard quotient (THQ) and hazard indexes (HI) were less than 1, showing that consumers face no non-carcinogenic risk (CR). CR values of Cu, Cd, Cr, Pb, and Ni ranged from 4.00 × 10^-8 to 6.35 × 10^-6, less than 10^-4, and total carcinogenic risk (CRt) values ranged from 9.85 × 10^-6 to 1.10 × 10^-5, indicating some pose a CR from consumption of those fish from the Padma River. To establish a more accurate risk assessment, numerous exposure routes, including inhalation and cutaneous exposure, should be explored.

• Journal of Soil and Groundwater Environment
• /
• v.7 no.4
• /
• pp.31-39
• /
• 2002

Pollutants from industry, mining, agriculture, and other sources have contaminated sediments in many surface water bodies. Sediment contamination poses a severe threat to human health and environment because many toxic contaminants that are barely detectable in the water column can accumulate in sediments at much higher levels. The purpose of this study was to make optimal treatment and disposal plan o( sediment for water quality improvement in small-scale resevoir based on an evaluation of degree of contamination. The degree of contamination were investigated for 23 samples of 9 site at different depth of sediment in small-scale J river. Results for analysis of contaminated sediments were observed that copper concentration of 4 samples were higher than the regulation of hazardous waste (3 mg/L) and that of all samples were exceeded soil pollution warning levels for agricultural areas. Lead and mercury concentration of all samples were detected below both regulations. Necessary of sediment dredge was evaluated for organic matter and nutrient through standard levels of Paldang lake and the lower Han river in Korea and Tokyo bay and Yokohama bay in Japan. The degree of contamination for organic matter and nutrient was not serious. Compared standard levels of Japan, America, and Canada for heavy metal, contaminated sediment was concluded as lowest effect level or limit of tolerance level because standard levels of America and Canada was established worst effect of benthic organisms. The optimal treatment method of sediment contained heavy metal was cement-based solidification/stabilization to prevent heavy metal leaching.

• Applied Biological Chemistry
• /
• v.45 no.2
• /
• pp.92-96
• /
• 2002

Present contamination levels of soils along the major roadsides of Seoul, Korea were investigated, and base-line data were accumulated for future use. Topsoil $(1{\sim}5$ cm) and subsoil $(20{\sim}50$ cm) from five districts (Gangdong-, Gwangjin-, Nowon-, Seodaemun- and Seongdong-gu) were sampled. The collected samples were airdried, passed through 2-mm sieves, and analyzed to determine the physicochemical properties including pH, EC, CEC, exchangeable cations (Ca, Mg, K, and Na), and heavy metal contents (Cd, Cu, Pb, and Zn). Soil textures of topsoils and subsoils were mainly loamy sand and sandy loam, respectively. The range of pH was $4.5{\sim}10$.0 with an average of 7.5 for both topsoil and subsoil, which is much higher than that of the forest soils in Seoul. The ranges of 0.1 N HCI extractable Cd, Cu, Pb, and Zn contents for both topsoils and subsoils were $0.0l{\sim}l.19$, N.D. (not $detected){\sim}228$.99, $N.D.{\sim}352$.54, and $2.97{\sim}332$.96 mg $kg^{-1}$, respectively. Most of the average heavy metal contents were lower than the concern level of the Soil Environment Conservation Act of Korea, but were much higher than those of the , forest soils in Seoul. Some sites were higher in heavy metal contents than the concern levels; in particular, the average Cu content in Seongdong-gu was much higher than the concern level, 50 mg $kg^{-1}$. Careful management of the soil to prevent the aggravation of the present contamination level and the dissemination of contamination is highly recommended.

• Korean Journal of Environmental Agriculture
• /
• v.24 no.3
• /
• pp.222-231
• /
• 2005

Most of the tailings have been left without any management in abandoned metalliferous mines and have become the main source of heavy metal contamination of agricultural soils and crops in the these areas. To compare of environmental assessment of heavy metals in tailings derived from various 25-metalliferous mines in Korea, 3 different analysis methods such as water soluble, 0.1 M-HCl extractable, and total acid digestion method (aqua regia) were used. The chemical composition of water soluble in mine tailing were in the order ${SO_4}^{2-}>Ca^{2+}>Mn^{2+},\;Na^+,\;Al^{3+}>Mg^{2+},\;Fe^{3+}>Cl^-$. Specially, pH, EC, ${SO_4}^{2-},\;and\;Ca^{2+}$ concentrations in tailing varied considerably among the different mines. The average total concentrations of Cd, Cu, Pb, Zn, and As in tailing were 31.8, 708, 4,961, 2,275 and 3,235 mg/kg, respectively. Specially, the contents of Cd, Zn and As were higher than those of countermeasure values for soil contamination (Cd : 4, Zn : 700 and As : 15 mg/kg in soil) by Soil Environmental Conservation Act in Korea. The rates of water soluble heavy metals to total contents in tailings were in the order Cd > Zn > Cu > Pb > As. The rates of 0.1M-HCl extractable Cd, Cu, Pb, Zn, and As (1M-HCl) to total content were 17.4, 10.2, 6.5, 6.8 and 11.4% respectively. The enrichment factor of heavy metals in tailings were in the order As > Pb > Cd > Cu > Zn. The pollution index in tailing Au-Ag mine tailing were higher than those of other mine tailing. As a results of enrichment factor and pollution index for heavy metal contaminations in mine tailing of metalliferous mines, the main contaminants are mine waste materials including tailings.