• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.6
• /
• pp.609-609
• /
• 1998

This paper surveys the effect of rice straw ash solution to the physical properties of Sappan Wood dyeing fabrics. In the quantitative analysis of rice straw ash solution, the quantities of absorbed ingredients in fabrics were increased by bath pull treatment but the amount of absorption(K/S value) was increased by bath pH4.5 treatment. This is related to the metal ion. Among the metal ion, effect of Fe iou and Al ion were related. In case added extracted dye solution to mordants, the color dye solution became dark and increased reddish. The changes of mechanical properties of fabrics tensile resilience, bending rigidity(B), compressional resilience(RC) were increased. Generally mechanical properties were increased by rice straw ash solution treatment, specially bath pH9 treatment. Rice straw ash solution treatment of dyeing fabrics made the improvement in tensile strength and elongation and in the amount of absorption, dye ability, color fastness, mechanical properties, tensile strength, elongation.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.6
• /
• pp.699-705
• /
• 1998

This paper surveys the effect of rice straw ash solution to the physical properties of Sappan Wood dyeing fabrics. In the quantitative analysis of rice straw ash solution, the quantities of absorbed ingredients in fabrics were increased by bath pull treatment but the amount of absorption(K/S value) was increased by bath pH4.5 treatment. This is related to the metal ion. Among the metal ion, effect of Fe iou and Al ion were related. In case added extracted dye solution to mordants, the color dye solution became dark and increased reddish. The changes of mechanical properties of fabrics tensile resilience, bending rigidity(B), compressional resilience(RC) were increased. Generally mechanical properties were increased by rice straw ash solution treatment, specially bath pH9 treatment. Rice straw ash solution treatment of dyeing fabrics made the improvement in tensile strength and elongation and in the amount of absorption, dye ability, color fastness, mechanical properties, tensile strength, elongation.

• Journal of the Korean Ceramic Society
• /
• v.54 no.1
• /
• pp.61-65
• /
• 2017

Examined in this study were the effects of copper oxide (II) addition and sintering conditions on the chromatic characteristics of copper glaze. Oxidatively sintered samples exhibited the negative increase of $CIEa^*$ and the positive increase of $CIEb^*$ with the increase of CuO concentration, leading to Green and Green-Yellow coloration. On the other hand, $CIEa^*$ and $CIEb^*$ of reductively sintered samples were positively increased in direct proportion. The green color of oxidatively sintered samples was originated from the $Cu^{2+}$ ions formed by the dissolution of CuO. The reductively sintered samples resulted in dull tone red color with low chroma. Such behavior seems to be influenced by the interplay of metal Cu aggregation, metal Cu globule, and $Cu_2O$ formed in the glaze layer through the redox interaction of CuO during the sintering process.

• Current Optics and Photonics
• /
• v.4 no.5
• /
• pp.428-433
• /
• 2020

Recently, the on-chip autofocus (AF) function has become essential to the CMOS image sensor. An auto-focus usually operates using phase detection of the photocurrent difference from a pair of AF pixels that have focused or defocused. However, the phase-detection method requires a pair of AF pixels for comparison of readout. Therefore, the pixel variation may reduce AF performance. In this paper, we propose a color-selective AF pixel with a plasmonic nanostructure in a 0.9 μ㎡ pixel. The suggested AF pixel requires one pixel for AF function. The plasmonic nanostructure uses metal-insulator-metal (MIM) stack arrays instead of a color filter (CF). The color filters are formed at the subwavelength, and they transmit the specific wavelength of light according to the stack period and incident angles. For the optical analysis of the pixel, a finite-difference time-domain (FDTD) simulation was conducted. The analysis showed that the MIM stack arrays in the pixels perform as an AF pixel. As the primary metric of AF performance, the resulting AF contrasts are 1.8 for the red pixels, 1.6 for green, and 1.5 blue. Based on the simulation results, we confirmed the autofocusing performance of the MIM stack arrays.

• Textile Coloration and Finishing
• /
• v.24 no.4
• /
• pp.247-252
• /
• 2012

The objective of this study was to find an appropriate method and process for protecting the green color in bamboo leaves and subsequent extraction of the green colorants, chlorophyll. Various inorganic salts including cupric sulfate, ferric sulfate, and zinc chloride were employed as green color protectors. Accordingly, the effects of metal salts and treatment conditions on color protection were investigated to find appropriate protector and conditions. And also, the efficacy of bamboo colorants as a natural green dye was evaluated through dyeing and colorfastness tests. Antimicrobial activity of dyed fabrics was measured by shake flask method in terms of bacterial reduction rate using Staphylococcus aureus(ATCC 6538). On the basis of experimental results for stabilizing bamboo leaves colorants, it was confirmed that Cu was the most appropriate metal type considering dye uptake, photostability and light fastness, and its optimum concentration was 0.025%. After the stabilization, the colorants were extracted efficiently at NaOH aqueous solution of 1.00%. It was concluded that bamboo leave has a high potentiality as new resources to produce a natural green dye with antimicrobial functionality.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.12
• /
• pp.2262-2267
• /
• 2010

In order to analyze the reason of wall blackening, which affect the decline of lifetime in a ceramic metal halide lamp, we carried out the deterioration of ceramic tubes by a change in operating conditions with arc tubes of two types of spherical and cylindrical, and we have confirmed the cause of wall blackening through the analysis of element composition and spectrum from SEM/EDS and spectrum analyzer. Wall blackening of tungsten was shown by sputtering from ignition in 20 minute on/off condition and wall blackening from chemical reaction between PCA wall and rare earth halides was shown significantly in a condition without on/off test. Especially, the wall blackening and the decline of luminous flux were reduced by inner convection in spherical type arc tube. Moreover, the color temperature and color coordinate were changed by reduction of emission spectrum of Dy which causes the chemical reaction with PCA wall.

• Journal of information and communication convergence engineering
• /
• v.8 no.1
• /
• pp.51-58
• /
• 2010

This paper proposes an edge adaptive color interpolation for an ultra-small HD-grade complementary metal-oxide semiconductor (CMOS) video sensor in camera phones that can process 720-p/30-fps videos. Recently, proposed methods with great image quality perceptually reconstruct the green component and then estimate the red/blue component using the reconstructed green and neighbor red and blue pixels. However, these methods require the bulky memory line buffers in order to temporally store the reconstructed green components. The edge adaptive color interpolation method uses seven or nine patterns to calculate the six edge directions. At the same time, the threshold values are adaptively adjusted by the sum of the color values of the selected pixels. This method selects the suitable one among the patterns using two flowcharts proposed in this paper, and then interpolates the missing color values. For verification, we calculated the peak-signal-to-noise-ratio (PSNR) in the test images, which were processed by the proposed algorithm, and compared the calculated PSNR of the existing methods. The proposed color interpolation is also fabricated with the 0.18-${\mu}m$ CMOS flash memory process.

• Journal of the Korean Society of Costume
• /
• v.64 no.6
• /
• pp.78-90
• /
• 2014

This paper examines the way that the principles of coloration for Hoecha(繪次) and Sucha(繡次) were applied for shoe making in ancient China and Korea. Hoecha is the principle of drawing, and Sucha is the principle of embroidery. Hoecha and Sucha is the application principle of the five colors(五方色) from the five elements(五行: metal, wood, water, fire, and earth). Hoecha matchs a color with the opposite side color, and Sucha matchs a color with the beside color. A shoe consists of Sinul(body of shoe) and ornaments attached to it. According to the ratings of shoes, Hoecha and Sucha were differently applied for coloration of Sinul and its ornaments. In general, shoes were classified into Seok and Gu. For Seok, which was the high-ranked shoes, Hoecha was applied, while Sucha was applied to Gu, the low ranked shoe. As Hoecha was originally a principle of coloration for patterns on tops(jacket. 上衣), it was applied to the high ranked shoes i.e., Seok. Also, as Sucha was a principle of coloration for patterns on bottoms(skirt. 下裳), it was applied to the low ranked shoes i.e., Gu. Thus, black was decorated on red Seok, blue on white Seok, red on black Seok, yellow on hyeon(玄: a kind of black color) Seok, and white on blue Seok, all of which were applications of the principle of Hoecha. As the application of the principle of Hoecha to Seok was also done for red Seok for males and females in late Joseon, and red Seok for the crown prince in the period of the Korean Empire, black decorations were used for red Sinul. However, for blue Seok, worn by females in the period of the Korean Empire where Ming's systems prevailed, black decorations were used, which was an application of Sucha. Though there had been no discrimination between genders in the application of Hoecha and Sucha originally, the low ranked principle of coloration was applied to Seok for females.

• The Bulletin of The Korean Astronomical Society
• /
• v.14
• /
• pp.5.2-5.2
• /
• 1989

• Proceedings of the Korean Environmental Health Society Conference
• /
• 2001.04a
• /
• pp.5-6
• /
• 2001