• Fashion & Textile Research Journal
• /
• v.11 no.6
• /
• pp.968-973
• /
• 2009

To get a variety of colors on silk fabrics with natural dyes, mordanting and combination dyeing were carried out. Gromwell, sappan wood, safflower were used as the three primary colors for combination dyeing. Metal compounds containing alum and iron were used as mordanting agents. In combination dyeing of safflower and sappan wood, safflower and gromwell, gromwell and sappan wood, various colors were obtained according to the content of dyes used. Safflower/sappan wood dyeing showed different colors between yellow red and red purple of Munsell color circle such a YR, R and RP. And safflower/gromwell dyeing showed R, RP, P and PB Munsell color circle and then gromwell/sappan wood showed R, RP and P. As the result of these experiments, wide range of colors (YR-R-RP-P-PB-B) were obtained according to various mixing portion of safflower, gromwell, sappan wood, dyebath pH and repetition dyeing.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.235-236
• /
• 2007

CCD(Charge-Coupled Device) 혹은 CMOS (Complementary Metal Oxide Semiconductor)와 같은 소자를 이용하여 빛을 전기적 신호인 Image로 재구성하는 촬상소자(Color Capture Device)는 촬영환경이 어두워지면 Dynamic Range가 작아지고, Noise가 상대적으로 심해진다[1][2]. 본 논문에서는 촬영 환경이 어두울 때, Resolution을 Preserving하는 Pixel Pitch가 큰 촬상 소자와 Motion Blur를 억제하는 Exposure Time이 긴 촬상 소자의 조합을 신호처리로 구현하여, 신호의 Power를 향상시켜 Dynamic Range를 키우고 Noise의 Boost-up을 억제하여 SNR(Signal to Noise Ratio)을 향상시키는 방식으로, 촬상 장치의 감도를 향상시켜 화질을 개선하는 방법을 제안한다.

• The Korean Journal of Food And Nutrition
• /
• v.6 no.4
• /
• pp.322-328
• /
• 1993

A study of general characteristics of acetone extracted pigment from the cell mass of Rhodospirillum rusrum DSM 467 was carried out for the development of natural food colorant. Through visible absorption scanning, it showed seven absorption peaks at 355, 410, 529, 624, 680 and 747nm, and it was shown to be yellow color. In acidic and neutral conditions, the color was yellow, while in the alkaline condition it was greenish yellow. This pigment was stable at pH range between 3.0~10.0, and below 4$0^{\circ}C$. In the presence of light and oxygen, the stability of pigment rapidly degraded and it became unstable in the presence of metal ions such as Cu2+, Al3+ and Fe3+. Through TLC analysis, it was shown to be composed of seven color fractions.

• Journal of Korean Ophthalmic Optics Society
• /
• v.10 no.4
• /
• pp.329-337
• /
• 2005

This study investigated prevalence of color vision loss different from children's residence. The study subjects are 3 to 6 grade's children of elementary school in four areas. The blood lead and urinary mercury were analysed using Atomic Absorption Spectroscopy. All of participations' blood lead and urine mercury concentration were below suggested level of concern such as criteria by CDC and ATSDR. Color vision was assessed by the Lanthony D-15 desaturated panel. Color vision loss was quantitatively established by the Color Confusion Index (CCI) and qualitatively classified by type of acquired dyschromatopsia according to Verriest's classification. The prevalence of color vision loss and CCI value for children in industrial area was significantly higher than other areas(p<0.05). However blood lead and urinary mercury concentration level was not correlated to the color vision loss. Therefore we believed that other environmental neurotoxic substance except metal had an effects on color vision loss for children in industrial area.

• The korean journal of orthodontics
• /
• v.53 no.3
• /
• pp.139-149
• /
• 2023

Objective: To assess the color stability and translucency of full cubic stabilized zirconia (FSZ) following orthodontic bonding with different surface treatments and coffee thermocycling (CTC). Methods: This in vitro study was conducted on 120 disc-shaped specimens of FSZ. Thirty specimens were selected as the control group and remained intact. The remaining specimens were randomly divided into three groups based on the type of surface treatment (n = 30): airborne particle abrasion (APA), silica-coating (CoJet), and carbon dioxide (CO₂) laser. After metal bracket bonding in the test groups, debonding and polishing were performed. Subsequently, all specimens underwent CTC (10,000 cycles). Color parameters, color difference (ΔE₀₀), and translucency parameter (TP) were measured three times at baseline (t0), after debonding and polishing (t1), and after CTC (t2). Data were statistically analyzed (α = 0.05). Results: Significant difference existed among the groups regarding ΔE₀₀t0t2 (p < 0.001). The APA group showed minimum (ΔE₀₀ = 1.15 ± 0.53) and the control group showed maximum (ΔE₀₀ = 0.19 ± 0.02) color stability, with no significant difference between the laser and CoJet groups (p = 0.511). The four groups were significantly different regarding ΔTPt0t2 (p < 0.001). Maximal increases in TP were noted in the CoJet (1.00 ± 0.18) and APA (1.04 ± 0.38) groups while minimal increase was recorded in the control group (0.1 ± 0.02). Conclusions: Orthodontic treatment makes zirconia restorations susceptible to discoloration and increased translucency. Nonetheless, the recorded ΔE₀₀ and ΔTP did not exceed the acceptability threshold.

• Journal of The Korean Astronomical Society
• /
• v.20 no.2
• /
• pp.63-94
• /
• 1987

Using many homogeneous data of DDO and UBV colors for all luminosity classes and physical quantities known from spectroscopic observations, new calibration schemes with DDO photometric parameters are presented for metal abundance, effective temperature and surface gravity of stars. And an intrinsic color relation is derived for the reddening estimate.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.378-379
• /
• 2009

High intensity metal halide discharge lamp performance, specifically the generated luminous flux and light color content, depends critically on the arc tube design. Factors influencing the design and consequent lamp efficacy include : lamp size, geometry, arc tube composition, fill chemistry, electrode design and excitation modes. Shaping of Polycrystalline Alumina(PCA) can be realized by conventional ceramic processes. Several processes are applied nowadays. Well-known in the ceramic high pressure field for decades are the pressing and the extrusion method. Newly developed slurry and precious forming technologies give the one-body seamless tubes, which improve thickness uniformity and lighting performance. Now, we reported some optical properties with different arc tube structures of ceramic metal halide lamps.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.4B no.1
• /
• pp.24-28
• /
• 2004

Metal halide lamps have been made suitable for use in outdoor illumination systems over many years. They are also widely used in application and commercial lighting due to their attracting properties such as good quality color, rendering and high efficiency. Over the past few years, a considerable number of studies have been conducted on the electronic ballast with hot restarting and resonance phenomenon. However, very few attempts have been made at the adaptive ignition method according to lamp state. This paper proposes an electronic ballast for metal halide lamps with an igniter for adaptive ignition. The proposed electronic ballast can generate different ignition voltages according to the arc tube state. The experimental results showed that the proposed ballast circuit using adaptive igniter is suitable for 70W HQI lamps.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.241-244
• /
• 2002

This paper presents the electronic ballast for the metal halide lamp with free voltage input and implemented for CDM-T[150W] lamp. HID lamps have a good color rendition, long life and good focusing capability but they have fickers by acoustic resonance when driven at high frequency. To reduce the acoustic resonance phenomena, the electronic ballast was designed for high frequency operation with the constant frequency sinusoidal wave of 75[kHz]. Finally, the experimental results on the ballast of CDM-T [150W]metal halide lamp with the propose methods are discussed.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.10
• /
• pp.1947-1953
• /
• 2009

Metal halide (MH) lamps have been largely used due to high luminous efficiency, good color rendering, and long life. Since the metal halide lamps have problems of high ignition voltage and acoustic resonance. Thus, the design of ballast is very difficult for engineers. This paper proposes prototype of electric ballast in order to solve above two problems. The proposed electric ballast is consisted of EMI filter, full wave rectifier circuit, active PFC, DBI(Dual Buck Inverter), dimming circuit and ignitor circuit. The DBI supplies both rectangular voltage and current to the lamp. As the result of the experiment, the acoustic resonance was eliminated and the ignitor circuit was designed to generate high ignition voltage than 5kV. It makes the dimming circuit possible to control the lamp power in range between 230W and 350W.