• 대한화학회지
• /
• 제33권6호
• /
• pp.571-576
• /
• 1989

$[M(NH_3)_5Cl]^{2+}$착물에 대하여 상대론적으로 파라미터화된 확장 Huckel(REX) 계산을 수행하였다. 궤도함수 및 overlap population에 대한 계산 결과는 실험적인 자료와 일치하였다. 또한 전자구조에 대하여 상대성 효과를 감안한 REX와 비상대론적인 EHT의 계산 결과를 서로 비교하였다. 이들 착화합물의 M-Cl 결합에 대한 파이 결합성은 $d^6$계 착물에서 보다 $d^3$ 및 $d^5$계 착물의 경우가 더 중요함을 알 수 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.207-207
• /
• 2011

Amorphous transparent oxide semiconductors (a-TOS) have been widely studied for many optoelectronic devices such as AM-OLED (active-matrix organic light emitting diodes). Recently, Nomura et al. demonstrated high performance amorphous IGZO (In-Ga-Zn-O) TFTs.1 Despite the amorphous structure, due to the conduction band minimum (CBM) that made of spherically extended s-orbitals of the constituent metals, an a-IGZO TFT shows high mobility.2,3 But IGZO films contain high cost rare metals. Therefore, we need to investigate the alternatives. Because Aluminum has a high bond enthalpy with oxygen atom and Alumina has a high lattice energy, we try to replace Gallium with Aluminum that is high reserve low cost material. In this study, we focused on the electrical properties of IZO:Al thin films as a channel layer of TFTs. IZO:Al were deposited on unheated non-alkali glass substrates (5 cm ${\times}$ 5 cm) by magnetron co-sputtering system with two cathodes equipped with IZO target and Al target, respectively. The sintered ceramic IZO disc (3 inch ${\phi}$, 5 mm t) and metal Al target (3 inch ${\phi}$, 5 mm t) are used for deposition. The O2 gas was used as the reactive gas to control carrier concentration and mobility. Deposition was carried out under various sputtering conditions to investigate the effect of sputtering process on the characteristics of IZO:Al thin films. Correlation between sputtering factors and electronic properties of the film will be discussed in detail.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.199-199
• /
• 2011

The addition of a carbanion to ${\yen}{\acute{a}}{\yen}{\hat{a}}$-unsaturated carbonyl compounds is of importance in the C-C bond formation reactions for modern pharmaceuticals and organic synthesis. Recently, heterogeneous asymmetric catalysis became more attractive area of research because of the easy recovery and separation of the catalyst from the reaction system. Most of synthetic methods for heterogeneous catalysts were grafting or immobilization of homogeneous catalyst onto the solid supports. Trans-1,2-Diaminocyclohexane(DACH) and L-proline ligands have been enormously used as chiral ligands in several catalytic transformation under homogenous conditions. Our group prepared l-proline functionalized mesoporous silica was synthesized under acidic condition using a poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) triblock copolymer template (EO20PO70EO20, Pluronic P-123, BASF). Furthermore, we successfully directly synthesized trans-1,2 diaminocyclohexane functionalized mesoporous silica by using microwave method. The direct functionalization of chiral ligand into the framework of mesoporous materials is expected to be useful for the heterogeneous asymmetric catalysis. So, we adopt the direct synthesis of chiral ligand functionalized mesoporous silica by using thermal and microwave irradiation. Then, chiral ligand functionalized mesoporous silicas were applied to enantioselective asymmetric catalytic reactions.

• 마이크로전자및패키징학회지
• /
• 제13권4호
• /
• pp.1-7
• /
• 2006

WLCSP(wafer level chip size package)는 웨이퍼 레벨에서 패키지 공정이 이루어지는 차세대 패키지 중 하나이다. WLCSP는 웨이퍼 레벨에서 패키지 공정이 이루어진다는 특징으로 인하여 웨이퍼당 생산되는 반도체 칩의 수에 따라 그 패키징 비용을 크게 줄일 수 있다는 장점이 있다. 그러나 응력 버퍼 역할을 하는 기판을 없애는 혁신적인 구조로 인하여 솔더 조인트의 신뢰성이 기존의 BGA 패키지에 비하여 취약하게 되는데, 이러한 솔더 조인트 신뢰성에 대하여 반도체 칩과 솔더볼을 연결하는 폴리머 절연층은 열팽창계수 차이에 의해 발생하는 응력을 흡수하는 중요한 역할을 하게 된다. 본 연구에서는 하이닉스에서 개발한 Omega-CSP를 사용하여 솔더볼 배열 변화와 제 1 절연층의 특성에 따른 솔더 조인트의 열피로 특성을 평가하였다. 그 결과 절연층의 특성 변화가 솔더 조인트의 열피로 특성에 주는 영향은 솔더볼 배열 구조에 따라 변화되는 것을 확인하였다.

• 복식문화연구
• /
• 제18권5호
• /
• pp.1003-1016
• /
• 2010

The purpose of this study is to reorganize any rusty image including natural modeling characteristic presented from the natural phenomenon to certain patterns in order to create the fashion design that are valued in the expansion of independently expressional area and modeling art. As a method for research, the author analyzed the concept and characteristic for rust with a base of theoretical background by the documental research and realistic consideration, analyzed its modeling characteristic through domestic and overseas pictures, and e-documents as data, inspected the modeling activities of various categories that various images were adapted related to rust, looked into the concept of Digital Textile Printing and its producing procedure as an expressional method, and analyzed the examples of modern dress and its ornament making use of Digital Textile Printing. The conclusions of this study are as below. First, the rust occurred due to the natural phenomenon is the bond with different material like metal, each unique modeling characteristic occurs and harmony of various patterns has abundant aesthetic value. Second, the author could endowed sensible characteristic and speciality with works and could produce creative fashion design that painting, abstractive pattern and harmony of unique sense of colors are significant by using the image of rust, Third, to emphasize natural feeling of rust, the author could develop creative design that simple silhouette and impressive pattern look significant by reorganizing and applying rust according to repetition, increment, rhythm, contract, emphasis and harmony. Fourth, Digital Textile Printing method is used to induce visual effect by the expression of feels of rust, and the author could express the natural patterns, delicate expression for the feels of a material and unique design of emotion.

• 대한화학회지
• /
• 제30권1호
• /
• pp.3-8
• /
• 1986

물-글리세롤, 물-에틸렌 글리콜, 물-이소프로필 알코올 및 물-t-부틸 알코올의 2성분 혼합용매 중에서 cis-$[Co(en)_2ClNO_2]^+$착이온의 가용매 분해반응을 분광광도법으로 연구하였다. 용매의 극성이 커짐에 따라 반응속도도 커지는 경향이 있었으며 반응속도의 대수값과 $\frac{D-1}{2D+1}$값을 도시한 결과 비직선적인 관계를 나타내는 것으로 보아서 용매의 수소결합이나 분산력등의 비정전기적인 상호작용이 지배적으로 작용함을 알 수 있었다. log k와 Grundwald-Winstein의 Y값을 도시한 직선의 기울기와 Kivinen식에서 구한 전이상태에 관여하는 물분자의 수 n값으로부터 실험에 사용한 착물의 가용매 분해반응은 Id메카니즘으로 진행됨을 알았다. 한편 자유에너지 사이클의 결과는 초기상태에서 보다 전이상태에서 용매구조의 효과가 더 큼을 알 수 있었다.

• 대한화학회지
• /
• 제25권6호
• /
• pp.394-398
• /
• 1981

두 가지의 팔면체형 Ni(II)-polyethyleneimine (PEI) 착물, [Ni(PEI)]$Cl_2$ 및 [Ni(PEI)$Cl_2$]를 합성하여 과산화수소 분해반응에서 이들 착물의 촉매활성도를 조사하고, 유사한 구조를 한 ethylenediamine 착물, $[Ni(en)_3]Cl_2$ 및 $[Ni(en)_2Cl_2$의 촉매활성도와 비교해 본 결과, 다음과 같은 순서로 촉매 활성도가 증가함이 관찰되었다 : $0{\approx}[Ni(en)_3]Cl_2{\le}[Ni(en)_2Cl_2]<[Ni(PEI)]Cl_2<[Ni(PEI)Cl_2]$ 가시선 및 적외선 흡수 스펙트럼을 측정하여 두 가지 Ni(II)-PEI 착물의 구조를 조사하여 본 결과 이들 착물의 촉매활성도는 배위자와 Ni(II)이온사이의 결합세기에 의존함을 알 수 있었다.

• 대한화학회지
• /
• 제38권8호
• /
• pp.590-597
• /
• 1994

유기 리간드(2,2,6,6-테트라메틸-3,5-헵탄내디온)을 란탄나이드 3가$(Pr^{3+}, Eu^{3+}, Gd^{3+} 그리고 Yb^{3+})$와의 착물들에 대한 거동을 UV-Vis 분광학적, 자기적, 그리고 전기화학적 방법에 의해 조사하였다. 2 또는 3개의 에너지 흡수띠가 이들 착물들의 스펙트라에 의해 관찰되었다. 결정장 갈라짐 에너지 크기와 스핀 또는 3개의 에너지 흡수띠가 이들 착물들의 스펙트라에 의해 관찰되었다. 결정장 갈라짐 에너지 크기와 스핀 짝지움 에너지 그리고 결합세기는 착물들의 스펙트라로부터 얻어졌다. 이들은 편재화이고, 낮은 스핀(또는 높은 스핀) 상태이며 그리고 강한 결합세기임을 알았다. 착물들의 거동은 비수용매속에서 순환전압전류법에 의해 관찰하였다. 이들 환원피크는 전자전이에 의한 2 또는 3단계의 비가역성이었다.

• 한국분말재료학회지
• /
• 제13권1호
• /
• pp.62-67
• /
• 2006

Friction welding of $Al_2O_3$ particulate reinforced aluminum composites was performed and the following conclusions were drawn from the study of interfacial bonding characteristics and the relationship between experimental parameters of friction welding and interfacial bond strength. Highest bonded joint efficiency (HBJE) approaching $100\%$ was obtained from the post-brake timing, indicating that the bonding strength of the joint is close to that of the base material. For the pre-brake timing, HBJE was $65\%$. Most region of the bonded interface obtained from post-brake timing exhibited similar microstructure with the matrix or with very thin, fine-grained $Al_2O_3$ layer. This was attributed to the fact that the fine-grained $Al_2O_3$ layer forming at the bonding interface was drawn out circumferentially in this process. Joint efficiency of post-brake timing was always higher than that of pre-brake timing regardless of rotation speed employed. In order to guarantee the performance of friction welded joint similar to the efficiency of matrix, it is necessary to push out the fine-grained $Al_2O_3$ layer forming at the bonding interface circumferentially. As a result, microstructure of the bonded joint similar to that of the matrix with very thin, fine-grained $Al_2O_3$ layer can be obtained.

• Journal of Welding and Joining
• /
• 제34권6호
• /
• pp.28-34
• /
• 2016

Galvannealed(GA) steels are now generally used in car body manufacturing for corrosion resistance. In this study, the weldability and joint mechanical behavior of a newly developed 1.2GPa grade GA ultra high strength TRIP(transformation induced plasticity) steel was investigated for three joining processes, such as adhesive bonding, resistance spot welding and weldbonding. Under both shear and peel stress conditions, the failure mode of the adhesive joints were the mixture of the adhesive cohesive failure, adhesive interface failure and coating layer failure. It means that the adhesion strength of GA coating onto the base metal was similar to that of adhesive bonding onto the GA coating. Under the shear stress condition, the weldbonding exerted to expand the optimal spot welding condition of 1.2GPa GA TRIP steel because the strength of adhesive bond overwhelmed that of the resistance spot weld. Under the peel stress condition, the weldbonding also exerted to expand the optimal spot welding condition of 1.2GPa GA TRIP steel by inducing the tear fracture mode rather than the partial plug fracture mode.