• 한국환경과학회지
• /
• 제5권4호
• /
• pp.481-494
• /
• 1996

This study was performed to investigate the relationship between concentrations of heavy metals in sediment and the depths of 27 sampling sites along the West Nakdong river in downstream of Nakdong River. The deepest site was Kangdong bridge nearby 20ft. From here, the depth was shallowed to Chidong gradually. In each site the smaller mesh was, the liger concentration of heavy metal becomed. Concentration of Zn, Cd, Cr and Cu at inflow point of Shinoe stream was 576.016 ppm, 262.307 ppm, 68.674 ppm and 61.634 ppm, respectively, the concentration was the higest at this point. From here, it was lowered gradually. The concentration of heavy metal at inflow point of Joman river was 155.328 ppm, 56.485 ppm, 25.200 ppm and 31.172 ppm, respectively, those concentrations were liger than other points with the exception of Shinoe stream. Therefore, woman river and Shinoe stream were the major source of pollution in West Nakdong river. Among two sources Shinoe stream was more important source of pollution. West Nakdong river has become lake by Noksan floodgate because it's pollution has had influence on Bonglim.

• 한국환경과학회지
• /
• 제27권7호
• /
• pp.477-488
• /
• 2018

In this study, heavy metal levels at the sediment monitoring network site upstream of the Gangjeong-Goryeong weir in the Nakdong River were surveyed from 2012 to 2016. We assessed the sediment pollution level using various pollution indexes based on ICP-MS analysis. The stream sediment pollution assessment standard, established through Regulation No. 687 of the National Institute of Environmental Research (2015), pollution load index (PLI), potential ecological risk index (RI), and mean PEL Quotient (mPELQ) were used to evaluate the sediment pollution level. We verified the representativeness of the monitoring point through the distribution of sedimentation and scour behavior by river bed surveying using anacousticDopplercurrentprofiler.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2003년도 총회 및 춘계학술발표회
• /
• pp.149-155
• /
• 2003

Objectives of this research were to fractionate heavy metals in soil samples in the upper Okdong River basin and to assess the potential pollution index of each metal fraction. Soil samples were collected from cultivated land soils and analyzed for physical and chemical properties. pH of cultivated soils ranged from 5.2 to 7.6. Contents of total kelhaldal nitrogen and loss on ignition were in the ranges of 0.6∼2.5%, and 1.9∼12.9%, respectively. Heavy metals in the cultivated land soils were higher in the abandoned closed coal mine near field soils than those in the paddy soils. Total concentrations of metals in the cultivated land soils were in the orders of Zn > Pb > Ni > Cu > Cd, exceed the corrective action level of the Soil Environment Conservation Law and higher than the naturals were abundance levels reported from uncontaminated cultivated land soils. Mobile fractions of metals were relatively small compared to the total concentrations. Soil Pollution Assesment Index(SPAI) values of each fraction of metals were leveled from Non polluted to Moderately polluted based on total concentrations. SPAI values of mobil fractions were lower than those of immobile fractions. Results on metal fractions and SPAI values of the cultivated land soils indicate that field soils samples were contaminated with heavy metals and had potential to cause a detrimental effects on plants. A prompt countermeasure to prevent field soils in the abandoned closed coal mine near fields are urgently needed.

• 한국지반환경공학회 논문집
• /
• 제13권12호
• /
• pp.59-66
• /
• 2012

본 연구에서는 철도정비창 부지 내에 폐기물 및 중금속오염 구간에서 채취한 토양을 대상으로 하였다. 그리고 효율적인 정화공정 설계를 위하여 고농도 오염구간, 저농도 오염구간, 폐주물사 함유 시료를 대상으로 입도분포 및 입도 분포 오염농도 분석을 실시하였다. 하지만 폐콘크리트, 폐목재 등의 건설폐기물, 폐주물사, 소각재 등이 부지 전반에 걸쳐 매립되어 있어 일반토양 오염과 다른 양상을 보이고 있었다. 따라서 일반적인 중금속정화기술로는 오염원이 감소하지 않아 혼합된 폐기물 중에 자성을 띠는 성분을 자력선별을 적용하여 실험한 결과 중금속 오염도는 감소하는 것으로 나타났다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제23권3호
• /
• pp.27-42
• /
• 2018

It is important to identify the contaminant sources and to evaluate the fate and transport of heavy metals to crops in agricultural lands. This study was conducted to evaluate metal sources and its transfer and accumulation to crop in agricultural soils. Pollution indices were calculated and multivariate analysis was performed to identify metal sources. To evaluate transfer and accumulation of metals to crops, the contents of phytoavailable metals were evaluated by using single extraction method and the correlation between metal content and soil properties was analyzed. Also the BCF was quantitatively evaluated for investigating the metal transition to each crop grown in the research area. As a result, Cr, Ni, and Co were expected to be mainly derived from geologic factors due to weathering of certain parent rocks. The content of nickel in soils of the research area was slightly higher than that of the concern level criteria based on total concentration, but the amount transferred and accumulated in the crops was actually low. Understanding the contamination characteristics by investigating the pollution sources of heavy metals and its transfer and accumulation to crops through various evaluation techniques could provide important information for proper management of the agricultural land.

• 한국지구과학회지
• /
• 제24권8호
• /
• pp.711-720
• /
• 2003

전주시 도로변 퇴적물의 중금속 오염을 평가하고 특성을 알기 위해 2002년 여름과 겨울 두 차례에 걸쳐 67곳에서 134개의 시료를 채취했다. 이들 시료를 Thompson and Wood (1982)와 Tessier et al. (1979)의 방법으로 화학처리한 후 Cd, Co, Cr, Cu, Ni, Pb, Zn, Mn등의 원소를 분석했다. 전주 도로변 퇴적물에 함유된 Zn, Cu, Pb, Cd의 함량은 서울의 도로변 토양, 먼지, 하수 슬러지에 함유된 것 보다 낮지만 세계 여러 나라에서 제시하는 토양 중 환경기준값을 초과했으며 자연 토양 중의 함량 보다 2-7배 초과한 값이다 산업지역, 상업지역, 주거지역으로 구분해 분석한 결과 전반적으로 산업지역에서의 중금속 함량이 약간 높고(특히 Cr, Ni, Pb, Zn)오염지수도 높다. 상업지역과 주거지역간의 중금속 오염 정도는 비슷하며 산업지역이 아니라도 특정 금속 가공업체나 자동차 정비 관련 업체가 위치해 있는 곳은 오염이 심하다. 연속추출 결과 중금속 원소의 존재 형태는 Pb, Zn, Mn등은 주로 탄산염 광물과 수반되거나 Fe-Mn산화물과 수반된 형태로 존재하고, Cu는 유기물과 함께 존재하는 비율이 높다. 그러나 전체적으로 규산염광물과 수반된 형태로 존재하는 비율이 50% 이상을 차지한다. 따라서 서울 지역에 비해 인위적 오염의 정도가 낮은 편이지만, Cd, Co, Ni, Pb, Zn, Mn등의 원소가 탄산염 형태로 존재하는 비율이 높기 때문에 오염원으로서의 가능성이 높다.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2008년도 춘계학술대회 논문집
• /
• pp.655-656
• /
• 2008

• 해양환경안전학회지
• /
• 제19권4호
• /
• pp.303-308
• /
• 2013

2011년 7월부터 2012년 2월에 걸쳐 광양만, 목포내만, 신안 비금도 주변해역의 저층 퇴적물의 COD와 AVS를 조사하여 해저 퇴적물의 오염도를 평가하였다. 아울러 퇴적물 중의 Cu, Cd, Pb, Zn의 함량을 조사하여 국내기준치와 외국의 기준치와 비교 평가하였고, 농집지수를 구하여 중금속의 축척과 인위적인 영향을 추정하였다. 그 결과, COD와 AVS를 이용한 해역의 오염도는 신안 비금해역과 광양만은 I등급, 목포내만은 III등급으로 평가되었다. 중금속의 조사 결과에서는 목포내만과 광양만에서는 중간오염 상태를 보였고, 신안 비금해역은 오염되지 않은 상태를 보였다. Igeo 결과에서 2 이상으로 나타난 곳은 목포내만과 광양만에서 Cu와 Cd이 오염된 상태를 보였다. 이와 같은 결과로부터 인위적인 오염원이 없는 해역의 경우에는 일반항목으로 퇴적물의 오염도를 평가할 수 있겠지만 산업시설이 밀집된 인위적인 영향이 큰 해역의 경우에는 퇴적물의 일반항목외 중금속을 이용한 해저 퇴적물의 오염도의 평가가 더욱 정확할 것으로 판단되었다.

• 한국해양환경ㆍ에너지학회지
• /
• 제19권1호
• /
• pp.25-36
• /
• 2016

본 연구에서는 시화호 유역 하천퇴적물 내 중금속의 시 공간적인 분포 특성을 조사하였으며 다양한 오염지수를 활용하여 오염도 및 위해 영향을 평가하였다. 조사지역별로 살펴보면 1간선수로(S1)에서는 Co, Zn 및 Cd이 최대농도를 보였으며, 2간선수로(S2)와 3간선수로(S3)는 각각 Ni과 As, 4간선수로(S4)는 Cr, Cu, Pb 및 Hg이 최대농도를 나타내고 있어 조사지역에 따라 오염되는 중금속 원소가 다른 특성을 보였다. 산업지역 내 하천에서의 중금속 농도가 농업/도심지역에 비해 3.3(Co)~83(Cu)배 높은 결과를 보였다. 농집지수(Igeo)를 통한 각각의 중금속 원소의 오염도 평가는 Cd과 Cu는 highly polluted, Zn, Pb은 moderately to highly polluted의 오염상태를 나타냈다. 본 연구에서 분석된 중금속을 종합적으로 고려한 오염부하지수(PLI)는 산업지역이 10.5로 심각한 오염상태였으며, 농업/도심지역은 오염되지 않은 것으로 나타났고, 하계조사시기가 다른 조사시기에 비해 상대적으로 오염된 결과를 보였다. 퇴적물 기준과의 비교를 통하여 산업지역 내 하천은 Cr, Ni, Cu, Zn 및 Pb의 85%가 PEL을 초과하는 것을 알 수 있었다. mPELQ와 SQI를 통하여 퇴적물 내 중금속의 종합적인 오염도 및 위해 영향을 고찰한 결과, 산업지역 내 하천퇴적물은 독성 영향이 크며 매우 나쁨(very poor)에 해당되는 오염상태를 보였으며, 하계 조사시기에 오염도가 심해지는 경향을 나타내었다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 추계학술대회 논문집
• /
• pp.145-149
• /
• 2004

It is necessary for managing a perfect process for degasing aluminum molten metal according to the increase of a grade of aluminum and its alloy products. There are some methods that have been used to manage a degasing process in recent years, such as an injection method that uses aluminum molten metal powder and chemicals supplier and input method that supplies argon and nitrogen, or chlorine gas by using a gas blow-tube. However, these methods show some problems, and it shows that it is a difficult process to handle. pollution due to the producing a lot of toxic gases like chlorine and fluoride gas. irregular effects, and lowering work efficiency due to the excessive processing time. The problems that are the most fatal are the producing a lot of sludge due to the reaction of aluminum molten metal with chemicals. loss of metals, and decreasing the life of refractory materials. In order to solve these problems. this paper develops a technology that is related to aluminum continuous casting molten metal and monolithic degasing apparatus. A degasing apparatus developed in this study improved the exist ing methods and prevented environmental pollution wi th smokeless. odor less, and harmlessness by using a new method that applies argon and nitrogen gas in which the methods used in the West and Japan are eliminated. The developed method can significantly reduce product faults that are caused by the production of gas and oxidation because it uses a preprocessed molten metal with chemicals. In addition. the amount of the produced sludge can also be reduced by 60-80% maximum compared with the existing methods. Then. it makes it possible to minimize the loss of metals. Moreover. the molten metal processing and settling time is also shortened by comparing it with the existing methods that are applied by using chemicals. In addition, it does much to improve the workers' health, safety and environment because there is no pollution. The improvement of productivity and prevent ion effects of disaster from the results of the development can be summarized as follows. It will contribute to the process rationalization because it does not have any unnecessary processes that the molten metal will be moved to an agitator by using a ladle and returned to process for degasing like the existing process due to the monolithic configuration. There are no floating impurities due to the oxidation caused by the contact with the air as same as the existing process. In addition. it can protect the blending of precipitation impurities. Because it has a monolithic configuration. it can avoid the use of additional energy to compensate the temperature decreasing about 60t that is caused by the moving of molten metal. It is not necessary to invest an extra facilities in order to discharge the gas generated from a degasing process by using an agitator. The working environment can be improved by the hospitable air in the factory because the molten metal is almost not exposed in the interior of the area.