• 한국지반환경공학회 논문집
• /
• 제15권11호
• /
• pp.13-19
• /
• 2014

투수성 반응벽체 공법은 지하수 오염을 정화하는 대표적인 방법 중의 하나이다. 영양염류와 중금속 등 여러 가지 오염물질이 동시에 존재하는 경우 두 가지 이상의 반응성 매질을 적용한 반응벽체공법으로 복합오염물질의 제거가 가능하다. 본 연구에서는 반응성 매질로 제올라이트와 제강슬래그를 함께 사용하는 경우 복합오염물질의 제거능을 평가하였다. 영양염류인 암모늄과 인산염, 중금속인 카드뮴이 혼합된 복합오염물질에 대하여 연속회분식실험을 통하여 제올라이트 및 제강슬래그와의 반응순서에 따른 오염물질 제거능을 분석하였다. 연속회분식실험 결과에 의하면 제올라이트-제강슬래그 순서로 반응하는 경우 영양염류와 중금속의 복합오염물질에 대한 제거능이 더 좋은 것으로 나타났다.

• 한국연초학회지
• /
• 제20권1호
• /
• pp.5-12
• /
• 1998

Pot experiment was conducted to investigate the effects of fly ash on growth responses and on accumulation of the heavy metals in soil. Two kinds of fly ash, anthracite and bituminous coal, were treated with different levels of 0, 0.4, 0.8, and 1.2 kg/pot(20L). Tobacco growth was better by application of fly ash than that by the control. However, the early stage of growth by application of bituminous coal, 1.2 kg/pot, was decreased due to the boron toxicity occurred by fly ash. Generally, tobacco yield was significantly increased with applying fly ash, showing the highest yield at 1.2 kg/pot for anthracite and at 0.8 kg/pot for bituminous coal. The content of total nitrogen in leaves was higher with fly ash than that of the control, while the content of calcium in leaves was low, Contents of heavy metal and the other minerals were not significantly different between the control and the treatment of fly ash. Soil pH after experiment was linearly increased with application level of fly ash, indicating that the application of bituminous coal was more effective than that of anthracite. Contents of available phosphate, exchangeable $Ca^{2+}$+ and $Mg^{2+}$ in soil were increased by application of fly ash, especially with bituminous coal. Contents of Cu, Cr, and Ni were increased with application level of bituminous coati even if the contents were still lower than critical levels for farming land. The other heavy metals were similar between the control and the application of fly ash.

• 대한치과교정학회지
• /
• 제22권1호
• /
• pp.123-131
• /
• 1992

This study was done to evaluate the changes of enamel surface by interproximal stripping and recovery of it by polishing. The number of 34 1st premolars which had extracted for orthodontic treatment were selected as samples. Interproximal stripping was performed by hand with metal strip and strip placer (Dentaurum Co., Germany) and low speed handpiece with diamond disk (Superdiaflex, Germany). Polishing was performed by hand with plastic strip (3M Col) and low speed handpiece with whip-mix, DCPA (Dicalcium Phosphate, Anhydrous, $CaHPO_4$) powder and Sof-lex (3M Co. U.S.A.) polishing kit. Each groups were examined under the scanning electron microscope (JEOL Co., JSM-840A, Japan) and the following results were obtained: 1. The stripped group performed by metal strip and diamond disk altogether showed deep furrow on the enamel surface as wide as about $10{{\mu}m}$. 2. There could be seen more irregular scratched line in the group stripped by metal strip than that by diamond disk. 3. The polished group performed by plastic strip and DCPA powder showed slight smoothening of the edge of stripped furrow on the enamel surface without relation to the stripping method. 4. The polished group performed by Sof-lex progressive polishing kit could not avoid the formation of the furrows on the enamel surface according to the particle size without relation to the stripping method. 5. The polished group performed by the superfine polishing wheel, the final stage of Sof-lex polishing method showed shallow scratched line as wide as within about $2{{\mu}m}$ on the enamel surface without relation to the stripping method. 6. The interproximal stripped enamel surface could not recover its original surface texture by any kind of polishing methods.

• The Korean Journal of Ecology
• /
• 제21권5_3호
• /
• pp.695-702
• /
• 1998

This study was carried out to investigate to determine seasonal variation of dehydrogenase activity, phosphatase activity, adenosine tri-phosphate content and some physicochemical properties, such as soil pH, moisture content, organic matter and several heavy metal concentrations from Apr. 1997 to jan. 1998 in Pinus densiflora and Quercus mongolica forest in Mt. Nam, to explain a relationship between enzyme activity and the soil factors. There were ranges of 4.03-4.65 in soil pH, 18.65-51.09% in moisture content and 6.69-95.95% in orgainc matter. The organic matter content decreased with soil horizon, showing the higher values in Q. mongolica forest. In comparison to the results of Kawngneung site as control area, there were slightly differences due to a development level of forest ecosystem and microbial degradation of organic matter. The heavy metal concentrations showed 32.50-75.55 ${\mu}g/g$ in Cu, 69.33-134.84 ${\mu}g/g$ in Zn, 57.02-150.32 ${\mu}g/g$ in Pb, and 0.36-1.00 ${\mu}g/g$ in Mt. Nam. These values are higher than in Kwangneung site because of long-term exposure to air pollutants from central city. On the other hand, ATP contents in Mt. Nam were lower than in Kawngneung site in relation to soil organic matter, moisture content and relatively high heavy metal concentrations. ATP contents per soil weight was largest in F+H layer and in spring time of other seasons. Dehydrogenase activity as an index of soil microbial activity had a ranges of 170.67-1,221.66 ${\mu}g$ TPF/g that showed lower values than in Kawngneung site. However, phophatase activity had a contray tendency due to P fertilization for a continuous management. Those values increased through spring to a maximum in the summer and fall in autumn. This is basically caused by metabolic state of soil on the biological activity and several and several factors, such as aeration, soil temperature, vegetation and microflora.

• 센서학회지
• /
• 제19권4호
• /
• pp.306-312
• /
• 2010

We have detected deoxynivalenol(DON) using a metal-oxide-semiconductor field-effect-transistor(MOSFET)-based biosensor. The MOSFET-based biosensor is fabricated by a standard complementary metal-oxide-semiconductor(CMOS) process, and the biosensor's electrical characteristics were investigated. The output of the sensor was stabilized by employing a reference electrode that applies a fixed bias to the gate. Au which has a chemical affinity for thiol was used as the gate metal to immobilize a self-assembled monolayer(SAM) made of 16-mercaptohexadecanoic acid(MHDA). The SAM was used to immobilize anti-deoxynivalenol antibody. The carboxyl group of the SAM was bound to the anti- deoxynivalenol antibody. Anti-deoxynivalenol antibody and deoxynivalenol were bound by an antigen-antibody reaction. In this study, it is confirmed that the MOSFET-based biosensor can detect deoxynivalenol at concentrations as low as 0.1 ${\mu}g$/ml. The measurements were performed in phosphate buffered saline(PBS; pH 7.4) solution. To verify the interaction among the SAM, antibody, and antigen, surface plasmon resonance(SPR) measurements were performed.

• 한국토양비료학회지
• /
• 제50권6호
• /
• pp.663-673
• /
• 2017

Heavy metal(loid) contamination of rice is the main issue in abandoned metal mine area with regard to food safety. A field study was conducted in mine area to see if soil amendments treatment including calcium superphosphate, sulfur, steel slag and S-containing fertilizer could reduce As and/or Cd content in rice grain and increase the growth of rice. The As content in brown rice reduced to 60% compared to the control only in $7.0Mg\;ha^{-1}$ of steel slag treatment. Cd reduction in rice was thought to be not the effect of amendments but the result from the difference in growth and development of rice plant and this could be ascribed to low soil Cd availability to rice plant. Compared with control, increased rice yield of cultivar Hwanggeumnuri was 1.3~2.2 and $1.5Mg\;ha^{-1}$ in calcium super phosphate and S-containing fertilizer treatment, respectively and the trend was also observed in cultivar Ungwang. However, steel slag treatment reduced the Ungwang yield by $0.4{\sim}0.9Mg\;ha^{-1}$. Future work will be needed to establish the agricultural measure with which secure the safety and yield of rice simultaneously.

• Journal of Electrochemical Science and Technology
• /
• 제13권1호
• /
• pp.78-89
• /
• 2022

ANODE-free Li-metal batteries (AFLMBs) operating with Li of cathode material have attracted enormous attention due to their exceptional energy density originating from anode-free structure in the confined cell volume. However, uncontrolled dendritic growth of lithium on a copper current collector can limit its practical application as it causes fatal issues for stable cycling such as dead Li formation, unstable solid electrolyte interphase, electrolyte exhaustion, and internal short-circuit. To overcome this limitation, here, we report a novel dual-salt electrolyte comprising of 0.2 M LiPF₆ + 3.8 M lithium bis(fluorosulfonyl)imide in a carbonate/ester co-solvent with 5 wt% fluoroethylene carbonate, 2 wt% vinylene carbonate, and 0.2 wt% LiNO₃ additives. Because the dual-salt electrolyte facilitates uniform/dense Li deposition on the current collector and can form robust/ionic conductive LiF-based SEI layer on the deposited Li, a Li/Li symmetrical cell exhibits improved cycling performance and low polarization for over 200 h operation. Furthermore, the anode-free LiFePO₄/Cu cells in the carbonate electrolyte shows significantly enhanced cycling stability compared to the counterparts consisting of different salt ratios. This study shows an importance of electrolyte design guiding uniform Li deposition and forming stable SEI layer for AFLMBs.

• 공업화학
• /
• 제34권6호
• /
• pp.596-602
• /
• 2023

크롬 기반 금속유기골격체(MIL-101(Cr))를 제조하고 이들을 활용한 유사화학작용제 diisopropyl methyl phosphonate(DIMP) 흡착 실험을 통해 방독면 정화통이나 보호의 충진물질로서 활용 가능성을 평가하였다. MIL-101(Cr)은 조절인자로 아세트산(MIL-101(Cr)-A)과 수산화나트륨(MIL-101(Cr)-N)을 활용하여 각각 제작하였는데, 아세트산을 조절인자로 사용하였을 때 보다 넓은 비표면적과 높은 DIMP 흡착량을 보였다. MIL-101(Cr)-A는 상대습도 90% 환경에서 10일 동안 노출 시 흡착제 무게 대비 약 160%의 수분을 흡수하여 활성탄 등 다른 흡착제와 비교할 때 흡수율이 높았다. MIL-101(Cr)-A를 상대습도 90% 환경에서 일정기간 노출한 시료에 대한 DIMP 흡착량 실험 결과 24시간 이후에는 노출되지 않았을 때 흡착량의 약 40% 수준으로 감소하였으나, 이 흡착량은 상용 방독면 정화통 충진 활성탄과 비교하였을 때 여전히 높은 흡착량으로 추후 방독면 정화통이나 보호의 충진물질로서 활용가능성이 높은 것으로 판단된다.

• Bulletin of the Korean Chemical Society
• /
• 제30권11호
• /
• pp.2691-2696
• /
• 2009

Effects of representative group II and transition metal ions on the stability of the $poly(dA){\cdot}[poly(dT)]_2$ triplex were investigated by the van’t Hoff plot constructed from a thermal melting curve. The transition, $poly(dA){\cdot}[poly(dT)]_2\;{\rightarrow}\;poly(dA){\cdot}poly(dT)\;+\;poly(dT)$, was non-spontaneous with a positive Gibb’s free energy, endothermic (${\Delta}H^{\circ}$ > 0), and had a favorable entropy change (${\Delta}S^{\circ}$ > 0), as seen from the negative slope and positive y-intercept in the van’t Hoff plot. Therefore, the transition is driven by entropy change. The $Mg^{2+}$ ion was the most effective at stabilization of the triplex, with the effect decreasing in the order of $Mg^{2+}\;>\;Ca^{2+}\;>\;Sr^{2+}\;>\;Ba^{2+}$. A similar stabilization effect was found for the duplex to single strand transition: $poly(dA){\cdot}poly(dT)\;+\;poly(dT)\;→\;poly(dA)\;+\;2poly(dT)$, with a larger positive free energy. The transition metal ions, namely $Ni_{2+},\;Cu_{2+},\;and\;Zn_{2+}$, did not exhibit any effect on triplex stabilization, while showing little effect on duplex stabilization. The different effects on triplex stabilization between group II metal ions and the transition metal ions may be attributed to their difference in binding to DNA; transition metals are known to coordinate with DNA components, including phosphate groups, while group II metal ions conceivably bind DNA via electrostatic interactions. The $Cd_{2+}$ ion was an exception, effectively stabilizing the triplex and melting temperature of the third strand dissociation was higher than that observed in the presence of $Mg_{2+}$, even though it is in the same group with $Zn_{2+}$. The detailed behavior of the $Cd_{2+}$ ion is currently under investigation.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 The Korea-Japan Joint Symposium
• /
• pp.23-24
• /
• 2003

We synthesized a poly[2-(2'-hydroxyphenyl) benzoxazole] under the two step procedures of Suzuki coupling polymerization with corresponding monomers followed by the deprotection of benzyl group. The polymer in DMF solution is applicable to colorimetric sensing fluoride anion, which shows a color change from colorless to yellow. High sensitivity to fluoride anion compared to other anions such as phosphate, chloride, and sulfate is ascribed to the high coordination ability of the 2-(2'-hydroxy phenyl)benzoxazole moiety in the polymer chain. Emission shift by metal cations, which can be applied to fluorescent sensing w as also observed in the polymer solution.