• 한국CDE학회논문집
• /
• 제14권3호
• /
• pp.197-206
• /
• 2009

In a finite element analysis of the metal forming processes having large plastic deformation, largely distorted elements are unstable and hence they influence upon the result toward negative way so that adaptive remeshing is required to avoid a failure in the numerical computation. Therefore automatic mesh generation and regeneration is very important to avoid a numerical failure in a finite element analysis. In case of generating quadrilateral mesh, the automation is more difficult than that of triangular mesh because of its geometric complexity. However its demand is very high due to the precision of analysis. Thus, in this study, an automatic quadrilateral mesh generation and regeneration method using grid-based approach is developed. The developed method contains decision of grid size to generate initial mesh inside a two dimensional domain, classification of boundary angles and inner boundary nodes to improve element qualities in case of concave domains, and boundary projection to construct the final mesh.

• 한국군사과학기술학회지
• /
• 제19권3호
• /
• pp.294-301
• /
• 2016

In this paper, we designed the transparent circuit analog radar absorbing structure using printed metal grid mesh for enhanced optical transmittance. To obtain wideband electromagnetic absorption and enhanced optical transparency at X-band, we proposed the resistive FSS(Frequency Selective Surface) using printed metal mesh pattern on transparent glass with PEC(Perfect Electric Conductor) plane using ITO(Indium Thin Oxide) coating. We then fabricated the proposed structure to verify the simulation results obtained from commercial EM simulator. The comparisons between the simulation and measured results show good agreements. The results also show that the proposed radar absorbing structure can provide wideband reflection as well as better optical transparency. We can apply this proposed structure to the canopy of stealth aircraft and other stealth and security applications for visible transparency.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2002년도 제7회 단조 심포지엄
• /
• pp.105-112
• /
• 2002

A new grid-based approach is presented for automatic generation of hexahedral meshes for simulation of plastic deformation in metal forming. In this approach, special enveloping schemes are applied, to eradicate the sources of the degenerate elements that may appear in a generated mesh. The schemes are described in detail, along with a complete procedure for mesh generation. The capability of the approach to deal with an arbitrary, 3-D process geometry is demonstrated through application to a selected forming problem.

• 소성∙가공
• /
• 제9권2호
• /
• pp.140-151
• /
• 2000

The finite element mesh approach for tool surface description is applied effectively to analyze sheet metal stamping processes. To improve the mesh quality and the stability of the mesh generation process, a gybrid method based on the grid approach and the Delaunay triangulation is proposed in the present work. In the present study, a general method for the mathematical description of arbitrarily shaped tool surface is proposed by introducing the parametric surface approach. A polynomial function employed to describe the base parametric surface and the boundary curves are defined to describe arbitrary three-dimensional trimmed surfaces. To verify the validity of the proposed method, automatic mesh generation is carried out for some shosen complicated parts including actual automotive panel.

• 한국정밀공학회지
• /
• 제31권11호
• /
• pp.969-974
• /
• 2014

Previously fabricated electronic devices were used for vacuum manufacturing processes such as conventional semiconductor manufacturing. However, they are difficult to apply to continuous processes such as roll-to-roll printing, which results in very high device manufacturing and processing costs. Therefore, many developers have been interested in applying continuous processes to contact printing or noncontact printing technologies and they proposed various continuous printing techniques instead of conventional batch coating. In this paper, we proposed improved gravure offset printing process as one of the contact printing technique. We used etching pattern geometry with soft core blanket roll for printing of ultra fine line below the 10um.Using this technique we obtained flexible metal grid mesh film as transparent conductive film.

• Transactions on Electrical and Electronic Materials
• /
• 제6권2호
• /
• pp.78-84
• /
• 2005

Standard crystalline solar cells are generally fabricated with the front grid pattern of silver paste contact. We have reported a detailed theoretical analysis of the proposed segmented cross grid line pattern in this paper. This work was carried out for the optimization of spacing and width of grid finger, main busbar and sub-busbar. The overall electrical and optical losses due to front contact were brought down to $10\%$ or even less as compared to the usual loss of $15\%$ or more in the conventional screen printed silver paste technology by choosing proper grid pattern and optimizing the grid parameters. The total normalized power loss for segmented mesh grid with plated metal contact was also observed and the total power loss could be brought down to $10.04\%$ unlike $11.57\%$ in the case of continuous grid and plated contact. This paper is able to outline the limitations of conventional screen printed contact.

• 한국디지털건축인테리어학회논문집
• /
• 제7권2호
• /
• pp.19-24
• /
• 2007

This study attempts to examine and to analyze the characteristics of transparent materials and its methods to apply in space. the ability to see through a physical element, whether it is clear glass, sandblasted acrylic, or a delicate fabric, can have a dramatic and sensory effect on the overall perception of a space. The various range of Transparent materials and product in glass, plastic, fabric, and grid now gives us the potential to maximize the flow of light in our enclosed space. This research will explore how transparent, translucent, and semi-opaque elements can be used within the interior with full range of see-through materials. The transparent materials can be divided in two level - as structural elements and as stylish accessories. A glass partition or floor, metal mesh stairs can create divisions or link one space to another while maintaining effective levels of natural light. there is also various level of products from glass chair to basin. With the enthusiasm for using transparent materials, transparent materials will be more decorative and powerful application while still maximize the highest possible flow of light.

• 한국주조공학회지
• /
• 제43권6호
• /
• pp.302-309
• /
• 2023

일반적으로 주조품은 복잡한 형상을 가지고 있고, 한 제품 내에서 두께의 차이가 현저하게 나는 경우가 있어 시뮬레이션을 위한 격자를 생성할 때 어려움이 있다. 주조 유동은 이상유동으로 수치해석을 할 때 공기와 용탕의 경계면을 추적해야하며 밀도차에 의한 압력장 계산에 많은 시간이 소요된다. 이와 같은 이유로 주조유동해석에는 직교격자가 주로 이용되어왔다. 그러나 직교격자는 형상을 제대로 표현하지 못한다. 곡면에서 나타나는 계단형상 격자로 인해 모멘텀 손실이 발생하고 이로 인해 용탕의 흐름이 달라질 수 있으며 결과적으로 잘못된 주조 방안 설계를 할 수 있다. 이를 피하기 위하여 직교격자계에서 형상을 좀 더 정확하게 표현하기 위하여 많은 수의 격자를 생성하여 해석을 한다. 또는 직교격자계에서 발생하는 문제를 수치적으로 보완하는 Cut Cell 방법을 적용하여 해석하는 방법이 있다. 본 연구에서는 직교격자계에서 주조유동해석을 할 때 격자수에 따른 해석결과와 Cut Cell 방법을 적용한 해석 결과를 비교하였다. 또한 주조공정별로 실제제품을 주조유동해석을 하고 공정별로 Cut Cell 방법을 적용한 결과를 고찰하였다.

• 한국정밀공학회지
• /
• 제31권11호
• /
• pp.975-979
• /
• 2014

Transparent conductive films (TCF) with excellent electrical properties and high mechanical flexibility have been widely studied because of their potential for application in optoelectronic devices such as light-emitting diodes, paper displays and organic solar cells. In this paper, we report on low-resistance and high-transparent TCF for flexible device applications. To fabricate a high-resolution roll imprinted TCF, the following steps were performed: the design and manufacture of an electroforming stamp mold, the fabrication of high-resolution roll imprinted on flexible film, the manufacture of Ag-nano paste which was filled into patterned film using a doctor blade process. Also, we was demonstrated with the successful application(ITO free organic photovoltaic) of the developed flexible TCF.