• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 전기학술대회논문집
• /
• pp.1035-1040
• /
• 2005

This paper deals with the design rule and performance results of the surge protective devices (SPDs) for low-voltage mains on shipboard. The proposed SPDs consists of a metal oxide varistors (MOV) and a L-C filter to improve noise-elimination performance. Three kinds of SPDs are fabricated and tested by using a combination surge generator which produce the standard impulse current of 8/20${\mu}s$ 2.1kA. As a results, the proposed SPDs with series L-C filter have more excellent transient blocking and noise reduction performance than the conventional ones.

• 한국음향학회지
• /
• 제16권6호
• /
• pp.54-60
• /
• 1997

본 논문에서는 SC 적분기와 SC Lossy 적분기로 구성된 SC필터에서 위상에러를 제거하기 위한 LDI 클럭방법 및 SC Lossy 적분기의 댐핑항에서 허수부분을 제거할 수 있는 방법을 제시하여 LDI 5차 elliptic 저역통과 SC 필터를 설계하였다. SC 필터 CMOS OP=AMP를 전원전압 ${\pm}$5V, MOSIS 2-${\mu}$m double-poly double-metal n-well CMOS 공정파라미터로 설계하여 SC 시뮬레이터인 SCANAP 프로그램을 통해 시뮬레이션 한 결과 설계된 SC 필터특성이 개선되었다. 집적회로를 위하여 MOSIS 2--${\mu}$m double-poly double-metal n-well CMOS 설계규칙에 따라 레이아웃 하였다.

• 상하수도학회지
• /
• 제22권4호
• /
• pp.413-420
• /
• 2008

In order to utilize cinder melting slag as a filter media to control the quality of early rainwater, its environmental stability was verified by heavy metal elution experiment and improved by pre-treatment. Possibilities of improving its function as an absorbent was considered. Absorption characteristics of melting slag before and after the pre-treatment were analyzed by heavy metal equilibrium and stationary-phase column experiments, which in turn were analyzed by comparison experiment with activated carbon. As a result of heavy metal elution experiment, every metal item existed in a much lower amount than the criteria or was not detected, implying that there is no problem recycling it. Absorption equilibrium experiment showed that the time for pre-treatment melting slag to reach the equilibrium was reduced, while the absorbed amount was greatly increased. Stationary-phase column experiment assures us that the elimination rate was not changed much by influx rate, pH and the change in packing volume rate, indicating that this melting slag can be used not only as a filter media to control the quality of early rainwater but also in many areas of water-processing.

• 멤브레인
• /
• 제8권4호
• /
• pp.191-202
• /
• 1998

경유자동차에서 발생하는 입자상물질은 대기오염의 주범으로 인식되어 국내외적으로 이의 규제가 점점 강화되고 있다. 본 고에서는 전 호에 이어 이러한 입자상물질을 제거하기 위하여 가장 보편적으로 사용되는 필터인 세라믹 하니컴 필터에서의 기공 및 필터특성의 조절과 설계에 대하여 언급하였다. 또한 그 외 각종 필터, 즉 세라믹 화이버 캔들 필터, 세라믹 폼 필터, 세라믹 크로스 플로우 필터 그리고 금속 필터 등의 성능 및 제조방법을 정리하였다. 이와같이 후처리장치용 필터로는 수없이 많은 필터들이 개발되어 많은 실증시험을 거치고 있으나 이러한 필터의 본격적인 상용화를 위하여는 재료 측면에서의 보다 많은 연구, 개발이 뒤따라야 할 것으로 판단된다.

• Journal of the Optical Society of Korea
• /
• 제19권6호
• /
• pp.673-678
• /
• 2015

Terahertz dual-band frequency selective surface filters made by perforating two different rectangular holes in molybdenum have been designed, fabricated and measured. Physical mechanisms of the dual-band resonant responses are clarified by three differently configured filters and the electric field distribution diagrams. The design process is straightforward and simple according to the physical concept and some formulas. Due to the weak coupling between the two neighboring rectangle holes with different sizes in the unit cell, good dual-band frequency selectivity performance can be easily achieved both in the lower and higher bands by tuning dimensions of the two rectangular holes. Three samples are fabricated, and their dual-band characteristics have been demonstrated by a THz time-domain spectroscopy system. Different from most commonly used metal-dielectric structure or metal-dielectric-metal sandwiched filters, the designed dual-band filters have advantages of easy fabrication and low cost, the encouraging results afforded by these filters could find their applications in dual-band sensors, THz communication systems and other emerging THz technologies.

• 한국통신학회논문지
• /
• 제24권9B호
• /
• pp.1668-1675
• /
• 1999

본 논문에서는 위성통신용 멀티플렉서에 사용 가능한 협대역 대역통과 여파기를 설계하기 위해 협대역 특성을 가지며 삽입 손실 및 소자의 크기를 최소화시킬 수 있는 고온 초전도체를 이용하여 hairpin-line 및 hybrid hairpin-line/parallel-coupled-line 여파기를 설계하고 실험을 통해 그 특성을 고찰하였다. Hairpin-line만으로 설계된 대역통과 여파기는 surface wave에 의한 spurious mode가 발생한다는 단점이 있지만 본 논문에서 제안된 hybrid hairpin-line/parallel-coupled-line 여파기를 사용하여 spurious mode를 줄일 수 있다. 동작 주파수가 14.25 GHz인 협대역 대역통과 여파기는 고온 초전도체를 이용하여 동일한 3극에서 일반금속 마이크로스트립 여파기보다 더 좋은 1%미만의 협대역과 3 dB이상 적은 삽입손실을 갖도록 하였으며 따라서 같은 성능을 보이고자 할 때 그 크기를 최소화시킬 수 있도록 설계하였다.

• 대한전자공학회논문지
• /
• 제25권2호
• /
• pp.227-232
• /
• 1988

A semicustom VLSI design fo digital filters used in TDM/FDM transmultiplexer is described. A filter bank composed of only all-pass digital filter sections are implemented with the polyphase network. The use of all-pass filters as basic building blocks is shown to provide a trans-multiplexer structure that has low computational requirements, low quantization noise, and high modularity. The silicon compiler system is used to reduce the design time and to increase the credibility of designed filters. As a prototype, 1st and 2nd order all pass filter are designed, using CMOS N-well double metal technology. The chip sizes of first order filter and the second order filter are 2652 x 533\ulcorner\ulcorner 5334x4300\ulcorner\ulcorner respectively.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.237-240
• /
• 2005

The demand of micro electrical mechanical system (MEMS) bio/chemical sensor is rapidly increasing. To prevent the contamination of sensing area, a filtration system is required in on-chip total analyzing MEMS bio/chemical sensor. A nano-filter was mainly applied in some application detecting submicron feature size bio/chemical products such as bacteria, fungi and so on. We suggested a simple nano-filter fabrication process based on replication process. The mother pattern was fabricated by holographic lithography and reactive ion etching process, and the replication process was carried out using polymer mold and UV-imprinting process. Finally the nano-filter is obtained after removing the replicated part of metal deposited replica. In this study, as a practical example of the suggested process, a nano-dot array was replicated to fabricate nano-filter fur bacteria sensor application.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.599-600
• /
• 2006

This paper described the state of art of porous metal materials, the typical manufacturing technologies and performances of sintered metal porous materials, with emphasis on the recent research achievements of CISRI in development of porous metal materials. High performance porous metal materials, such as metallic membrane, sub-micron asymmetric composite porous metal, large dimensional and structure complicated porous metal aeration cones and tube, metallic catalytic filter elements, lotus-type porous materials, etc, have been developed. Their applications in energy industry, petrochemical industry, clean coal process and other industrial fields were introduced and discussed.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2004년도 추계학술대회 논문집
• /
• pp.112-113
• /
• 2004