• Applied Chemistry for Engineering
• /
• v.3 no.1
• /
• pp.156-171
• /
• 1992

Chitin was isolated from crab shell. Chitosan, which was prepared by the deacetylation of chitin, was acylated to obtain N-acetyl(regenerated chitin), N-propionyl, N-butyryl, N-hexanoyl, N-decanoyl and N-maleated chitosans and their metal ion adsorption characteristics of N-acylchitosans were investigated. In order to enhance the adsorptivity, their porous beads were prepared and their adsorptivity with respect to the porosity and the adsorptivities for metal ions($Cu^{2+}$, $Ni^{2+}$, $CO^{2+}$, $Mn^{2+}$, $Ag^{+}$)were investigated. Their metal ion adsorptivities were remarkably imporved compared to those of chitin. As the larger acyl groups were introduced, adsorptivity increased, but that of N-decanoyl chitosan showed some decrease because of steric hindrance of the bulky N-decanoyl group. N-Maleated chitosan containing carboxyl group showed highly improved adsorptivity, and N-acylchitosans showed the good selective adsorption in the mixed metal ions($Cu^{2+}$, $Ni^{2+}$, $CO^{2+}$, $Mn^{2+}$ and $Ag^{+}$). They also showed excellent adsorption characteristics as chelating polymers.

• Textile Coloration and Finishing
• /
• v.17 no.1
• /
• pp.20-29
• /
• 2005

Cotton fabric was treated with a reactive anionic agent in order to have anionic sites(-S03-) on it, which made it possible for the fabric to adsorb various cationic materials. In this study, the adsorptivity of various heavy metal ions such as Pb(II), Cd(II), Cr(III), Co(II), Cu(II), Ni (II) and Cr(VI) on the cotton fabrics treated with anionic agent was examined at the various conditions; concentrations of heavy metal ions, pHs of solution, reaction time and temperature. As a result, the adsorptivity of the heavy metal ions on the cotton fabrics treated with the anionic agent was highly increased comparing to that of untreated cotton fabrics. The order of the adsorptivity was as follows: $Pb(II)>Cd(II)>Cu(II)\geqNi(II)\geqCo(II)>Cr(III)\ggCr(VI)$. The adsorption amounts of most heavy metal ions were increased in weak alkaline conditions and were reached to an adsorption equilibrium within 10 ~ 30 minutes. The maximum adsorption ratios of Pb(II) and Cd(II) were respectively 99% and 80% of the initial concentration of heavy metal ions. Therefore the anionized cotton fabrics seem to be utilized as an adsorption fabrics for the removal of heavy metal ions in the waste water.

• Journal of Environmental Science International
• /
• v.12 no.7
• /
• pp.817-824
• /
• 2003

Various kinds of zeolites, such as analcime (ANA), cancrinite (CAN), Na-Pl and sodalite octahydrate (SOD) could be synthesized from Hwangto by hydrothermal reaction in a high-pressure vessel. The adsorption characteristics of Cu(II) and Cd(II) by Hwangto and its synthetic zeolites were investigated using the chemical and electrochemical surface parameters of these adsorbents. The heavy metal adsorptivity among the adsorbents decreased in the following sequences: Na-Pl > SOD > ANA > CAN > Hwangto. This sequence was the same with the values of surface site density (Ns) of these adsorbents and was correlated inversely with the values of pHpzc (pH of the point of zero charge) and the va]ues of K$\_$a2/(int) (intrinsic surface deprotonation constant) of the adsorbents for synthetic zeolites, i.e., the adsorbents with higher values of Ns and with lower values of pHpzc and K$\_$a2/(int) for synthetic zeolites showed higher heavy metal adsorptivity. With increasing pH, the heavy metal adsorptivity increased greatly between pHpzc and pH 6 or 7 because of the steep increase of negatively charged sites for synthetic zeolites, but for Hwangto, it increased broadly because of slow increase of negatively charged sites based on its lower surface sites.

• Analytical Science and Technology
• /
• v.10 no.4
• /
• pp.291-299
• /
• 1997

2,2'-iminodibenzoic acid-cellulose was prepared by reacting 2,2'-iminodibenzoic acid salt with cellulose-Cl obtained by chlorination of cellulose-OH which is the major component of sawdust. The adsorptivity of Pb(II) and Cu(II) was studied using the synthetic chelating adsorbent. The adsorption amounts of those ions increased with increasing pH and the optimum adsorption time of metal ion was about 1hr. The adsorptivity of Pb(II) was larger than that of Cu(II).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.2
• /
• pp.934-940
• /
• 2012

Antioxidant activities such as reducing power, electron donating ability(EDA) and oxidation stability of Rumex crispus extracts with ethanol were examined, and adsorption of Pb(II) and Cd(II) with dried Rumex crispus powder in aqueous solution was experimented. Extraction yields based on the soluble solid contents ranged 1.9% to 3.0%, and were inversely proportional to solvent ratio but proportional to extraction temperature. Reducing power and EDA were also increased with extraction temperature but decreased with solvent ratio. These were corresponded to 86.4% and 91.0% of ascorbic acid reducing power and EDA, respectively, on 20 folds of solvent ratio and $75^{\circ}C$ Oxidation stability of Rumex crispus extracts on the corn seed oil was 86~91.3% of butylated hydroxytoluene. Pb(II) adsorptivity of Rumex crispus was higher than Cd(II), and adsorption rate of Pb(II) was 88% in 20 ppm concentration and 60min.

• Journal of the Korean Ceramic Society
• /
• v.45 no.4
• /
• pp.196-203
• /
• 2008

Metal-carbon/$TiO_2$ composite photocatalysts were thermally synthesized through the mixing of anatase to metal(Cu, Zn) containing phenol resin in an ethanol solvent coagulation method. The BET surface area increases, with the increase depending on the amount of metal salt used. From SEM images, metal components and carbon derived from phenol resin that contains metal was homogeneously distributed to composite particles with porosity. XRD patterns revealed that metal and titanium dioxide phase can be identified for metal-carbon/$TiO_2$ composites, however, the diffraction peaks of carbon were not observed due to the low carbon content on the $TiO_2$ surfaces and due to the low crystallinity of the amorphous carbon. The results of a chemical elemental analysis of the metal-carbon/$TiO_2$ composites showed that most of the spectra for these samples gave stronger peaks for C, O, treated metal components and Ti metal compared to that of any other elements. According to photocatalytic results, the MB degradation can be attributed to the three types of synergetic effect: photocatalysis, adsorptivity and electron transfer, according to the light absorption between the supporter $TiO_2$, metal species, and carbon layers.

• Journal of Environmental Health Sciences
• /
• v.18 no.2
• /
• pp.106-116
• /
• 1992

In order to examine the influences of diluent, DVB, and ligand content, in the adsorption velocities and capacities of chelating resins to heaw metal ions, the chelating resins containing the PO$_3$H, amide, and PO$_3$H+amide were prepared from AN-STR-DVB copolymer. The adsorption capacities of chelating resins were measured by ICP-AES. The major results of the studies are as follows: The optimized compositions of the chelating resins having the highest adsorptivity for the heavy metal ions were found to be DVB=7 wt%, toluene= 100 vol%. The adsorption rate of the chelating resins to the heaw metal ions was PO$_3$H > PO$_3$H+Amide > Amide in order.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.5
• /
• pp.515-520
• /
• 2007

Recently, the treat of sludge is usually progressed by ocean disposal. But it will be totally banned by content of its heavy metal according to London Dumping Convention, gradually. The stable way of treat of sewage sludge should be examined urgently. To solve the problem, recently, there are efficient and environment-oriented method. One of them is to produce absorbent through the activation. This study produces absorbent through steam activation. As basic experiment, optimum activation condition for preparation of good absorbent is researched through study of the fellowing variables : steam flow rate, activated temperature, activation time. As the result of this with standard on iodine adsorptivity, it is chosen, that steam flow rate "30 mL/hr", activation temperature $"500^{\circ}C"$, activation time "60 minutes". At the time, iodine adsorptivity and yield shown that 228.4 mg/g, 77.23%. And also, by using nitrogen adsorption, SEM and EDS are confirmed that pore development, specific surface area, mean pore size, chemical component and content. Pore developed by steam activation is also confirmed that it is micropore.

• Applied Chemistry for Engineering
• /
• v.2 no.3
• /
• pp.270-278
• /
• 1991

Carboxymethyl chitin(CM-chitin) was prepared by the reaction of alkali chitin with monochloroacetic acid in isopropyl alcohol. According to the pH variation, the adsorptivity of this chelating polymer to the alkali-earth metal ions such as $Ca^{2+},\;Mg^{2+}$, $Sr^{2+}$, $Ba^{2+}$ ions was determined by batch method. The adsorption tendency of this chelating polymer to most metal ions was increased with the increase of pH. The highest degree of adsorption was observed toward $Ca^{2+}$ ion among the alkali-earth metal ions. The selectivity adsorption property toward $Ca^{2+}$ ion was examined in the solution of $Ca^{2+}$ and $Mg^{2+}$ ions, and it was observed that CM-chitin showed excellent selectivity to $Ca^{2+}$ ion than $Mg^{2+}$ ion. $Mg^{2+}$ ion bound to CM-chitin molecule in the presence of $Ca^{2+}$ ion owing to low equilibrium constant. In the adsorption experiment of $Ca^{2+}$ and $Mg^{2+}$ ions to the CM-chitin under coexistence of $Na^+$ and $K^+$ ions, it observed that adsorptivity of only $Ca^{2+}$ ions was not affected by these monovalent cations.

• Journal of Environmental Science International
• /
• v.8 no.4
• /
• pp.491-496
• /
• 1999

Removal of Cu(II), Cr(III) and Pb(II) ions from aqueous solutions using the adsorption process on the loesses has been investigated. Variations of contact time, pH, adsorption isotherms and selectivity of coexisting ions were experimental parameters. pH of KJ and YIK samples diluted to 1% solution, was rearly the same with each value of pH 5.58 and 5.49, and both samples showed weak acidic properties. From chemical analysis, both samples contain remarkably different amounts of ${SiO}_{2}$, ${Al}_{2}O_{3}$ and ${Fe}_{2}O_{3}$. From XRD measurement, quartz was mainly observed in both samples. Kaolinite was also observed, also in both samples, but Feldspar was only observed in KJ sample. Adsorption of metal ions on the loesses were reached at equilibrium by shaking for about 30min. The adsorption of Cr(III) ion was higher than that of Cu(II) oand Pb(II) ions. The order of amount adsorbed among the investigated ions was Cr(III)>Pb(II)>Cu(II). In acidic solution, the adsorptivity of loesses was increased as pH increased. The adsorption of Cr(III) ion on the loesses were fitted to the Freundlich isotherms. Freundlich constants(1/n) of KJ and YIK loesses were 0.54 and 0.55, respectively.