• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제2권2호
• /
• pp.82-102
• /
• 2008

Packet losses tend to occur during short error bursts separated by long periods of relatively error-free transmission. There is also a significant spatial correlation in loss among the receiver nodes in a multicast session. To recover packet transmission errors at the transport layer, tree-based protocols construct a logical tree for error recovery before data transmission is started. The current tree construction scheme does not scale well because it overloads the sender node. We propose a scalable recovery tree construction scheme considering these properties. Unlike the existing tree construction schemes, our scheme distributes some tasks normally handled by the sender node to specific nodes acting as repair node distributors. It also allows receiver nodes to adaptively re-select their repair node when they experience unacceptable error recovery delay. Simulation results show that our scheme constructs the logical tree with reduced message and time overhead. Our analysis also indicates that it provides fast error recovery, since it can reduce the number of additional retransmissions from its upstream repair nodes or sender node.

• 대한조선학회논문집
• /
• 제41권1호
• /
• pp.47-54
• /
• 2004

The friction drag reduction of a ship is of prime importance for the design and production of high-valued/high-tech ship. Thus, this study carried out the development of reliable numerical tools to identify the friction drag reduction mechanism for turbulent boundary layer on the ship surface and to deduce the optimum reduction technique by numerical experiment. The developed LES and DNS numerical tools were applied to simulate the turbulent channel flow These results were very well matched with previous results not only qualitatively but also quantitatively. The parallelization using MPI (Message Passing Interface) technique implemented in the developed code to speed up the simulation and to obtain the accurate results from the fine grid system was testified its computational efficiency.

• ETRI Journal
• /
• 제38권5호
• /
• pp.934-940
• /
• 2016

In this paper, secure multicasting with the help of cooperative decode-and-forward relays is considered for the case in which a source securely sends a common message to multiple destinations in the presence of a single eavesdropper. We show that the secrecy rate maximization problem in the secure multicasting scenario under an overall power constraint can be solved using semidefinite programing with semidefinite relaxation and a bisection technique. Further, a suboptimal approach using zero-forcing beamforming and linear programming based power allocation is also proposed. Numerical results illustrate the secrecy rates achieved by the proposed schemes under secure multicasting scenarios.

• ETRI Journal
• /
• 제39권5호
• /
• pp.729-736
• /
• 2017

This work investigates secure cluster-aided multi-hop randomize-and-forward networks. We present a hop-by-hop multi-hop transmission scheme with relay selection, which evaluates for each cluster the relays that can securely receive the message. We propose an analytical model to derive the secure connectivity probability (SCP) of the hop-by-hop transmission scheme. For comparison, we also analyze SCPs of traditional end-to-end transmission schemes with two relay-selection policies. We perform simulations, and our analytical results verify that the proposed hop-by-hop scheme is superior to end-to-end schemes, especially with a large number of hops or high eavesdropper channel quality. Numerical results also show that the proposed hop-by-hop scheme achieves near-optimal performance in terms of the SCP.

• 한국군사과학기술학회지
• /
• 제19권1호
• /
• pp.50-56
• /
• 2016

This paper is about the implementation of the OFDM-based border guard/reconnaissance communication terminal systems. We have implemented Real-time Dynamic DL/UL symbol rate control function using the DL-MAP message, and proposed error detection method caused by malfunctioning and timing optimization method. The proposed scheme detects the variable rate symbol decoding timing without increasing additional physical layer logic, and also provides a wide variety of DL/UL data transfer rate. Furthermore, the proposed scheme applies to the current border guard/reconnaissance equipment and confirms a operation performance through field tests and demonstration at home and abroad.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부A
• /
• pp.226-228
• /
• 1998

Current power systems are integrated and operated in the form of EMS/SCADA with the development of computer and communication. With this EMS/SCADA system, the production, transmission and distribution of power are effectively operated. But if the communication protocol are different from each other, it is difficult to integrate the whole system. To solve this problem, Electric Power Research Institute (EPRI) issued new standard communication protocol between control centers named Inter-Control Center Protocol (ICCP). ICCP specifies the use of Manufacturing Message Specification(MMS) for the messaging services needed by ICCP in layer 7 and support the communication between heterogeneous control centers. This study deals the characteristics of ICCP, relation between ICCP and MMS and also implements the data exchange between control centers using ICCP.

• 한국정밀공학회지
• /
• 제16권3호통권96호
• /
• pp.91-102
• /
• 1999

Fieldbus provides real-time data communication among field devices in the manufacturing automation and process control systems. In this study, an experimental model of fieldbus-based manufacturing automation system is developed. Experimental model consists of two robots, two conveyor belts, NC machine, PLC, sensors and operator station. These machines are interconnected into the Profibus network, and exchange their data through the services provided by FMS(Fieldbus Message Specification), which is the application layer protocol of Profibus. The experimental model is used to measure the network-induced delay of variable and file data transmitted through FMS services. Network-induced delays are collected and analyzed on each sublayer of Profibus protocol stack. The results obtained from the experiment of this study can be effectively utilized when fieldbus is implemented on the practical manufacturing automation systems.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권10호
• /
• pp.5049-5062
• /
• 2016

This paper analyzes the secrecy performance of an amplify-and-forward (AF) relay network, where a multi-antenna eavesdropper attempts to overhear the transmitted message from a multi-antenna source to a multi-antenna destination with a single antenna relay. Firstly, we derive the approximate analytical expressions for the secrecy outage probability (SOP) and average secrecy rate (ASR) of the relay network. Then, asymptotic expressions of SOP and ASR at high main-to-eavesdropper ratio (MER) are also provided to reveal the diversity gain of the secure communication. Finally, numerical results are given to verify the theoretical analysis and show the effect of the number of antennas in the considered relay network.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2006년도 가을 학술발표논문집 Vol.33 No.2 (A)
• /
• pp.429-432
• /
• 2006

CAN(Controller Area Network) 프로토콜은 데이터 링크 계층(Data Link Layer)에서 여러 가지 결함 허용(Faulttolerant) 메커니즘을 기본적으로 제공하기 때문에, 고신뢰성, 고안전성이 요구되는 임베디드 제어 시스템(예: 자동차, 산업제어 등)에서 많이 사용되고 있다. 하지만 제한된 네트워크 대역폭과 이에 따른 응답시간 지연이라는 문제점을 가지고 있으며, 이에 본 논문에서는 전송될 CAN 메시지의 길이를 감소시키기 위해 CAN 메시지의 Stuffing-bit를 최소화하는 메커니즘을 제안하였다. 실험을 통해, CAN 메시지 길이의 축소로 인해 CAN 버스의 부하(Load)를 덜게 되었으며, 네트워크 대역폭 이용률이 증가하는 것을 확인하였다.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2003년도 봄 학술발표논문집 Vol.30 No.1 (C)
• /
• pp.325-327
• /
• 2003

현재, IEEE 802.11 WG(Working Group)중에는 AP(Access Point)간의 표준화된 프로토콜을 개발하는 TGf(Task Group F)가 있다. 이 그룹에서는 서로 다른 제조업체에서 생산한 AP 간의 상호연동을 보장하기 위한 IAPP(Inter Access Point Protocol)를 제안하였는데. 이는 동일 서브네트워크 내의 서로 다른 AP 간에 이동성을 보장하기 위한 프로토콜로. STA(Station)들이 이동할 때 재인증 과정을 거치지 않고 AP 간의 Security Context 정보나 Layer 2 forwarding 정보를 공유함으로서 STA간의 seamless connectivity를 제공한다. 본 논문에서는 위의 AP간의 메시지 전달시 발생할 수 있는 키 유출을 막기 위해서 메시지의 전달 경로를 바꾸고. 좀 더 높은 보안성을 제공하기 위해 공개키를 이용한 방안을 제시하고자 한다.