• Journal of KIISE:Information Networking
• /
• v.32 no.1
• /
• pp.100-109
• /
• 2005

A Mobile Ad-Hoc Network (MANET) supports a multi-hop wireless network without any prepared base station (BS). The MANET is capable of building a mobile network automatically without any help from DHCP servers for address allocation or routers to forward or route messages. Many routing protocols have been proposed for the MANET, but these specify the most optimized or shortest path from a source to a destination, and they assume that nodes are pre-configured before communication. To make up for this, address allocation algorithms, such as MANETConf [1] and prophet address allocation algorithm [2], have been proposed. Especially, MANETConf proposes address allocation algorithm with duplication address check. In this paper, we present a dynamic node configuration protocol based on 2-tierd hierarchical network architecture for mobile ad-hoc network, modified from [1]. Especially, it reduces the number of broadcast message exchange between nodes when a new node somes into a network, which lessens network overhead, remarkably. This protocol is based on two-tired structure, and it ensures address allocation with simple duplication address defection mechanism.

• The KIPS Transactions:PartD
• /
• v.14D no.4 s.114
• /
• pp.373-380
• /
• 2007

Ubiquitous electronic commerce can offer anytime, anywhere access to network and exchange convenient informations between individual and group, or between group and group. To use secure ubiquitous electronic commerce, it is essential for users to have digital signature with the properties of integrity and authentication. The digital signature for ubiquitous networks is required neither a trusted group manager, nor a setup procedure, nor a revocation procedure etc. because ubiquitous networks can construct or deconstruct groups anytime, anwhere as occasion demands. Therefore, this paper proposes a threshold ring signature as digital signature for secure ubiquitous electronic commerce using the ring signature without forgery (integrity) and the (n,t) ring signature solving the problem cannot prove the fact which a message is signed by other signer. Thus the proposed threshold ring signature is ubiquitous group signature for the next generation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.11
• /
• pp.1011-1019
• /
• 2012

This paper presents a novel hybrid authentication scheme in the next-generation Tactical Mobile Communication Systems(TMCS) with wireless MSAP mesh networks. The existing centralized and distributed authentication methods for security between MSAPs may have their pros and cons. The centralized authentication method induces overhead from frequent MSAP association which leads to long authentication delay. On the other hand, the distributed authentication method requires initial sharing of the authentication information. Therefore, a more efficient authentication scheme is needed to protect the network from malicious MSAPs and also maximize efficiency of the network security. The proposed scheme provides a hybrid method of efficiently managing the authentication keys in the wireless MSAP mesh network to reduce the induced authentication message exchange overhead. Also, as the authentication method between MSAP and TMFT is different, a method of utilizing the ACR for handling the EAP packets is proposed. In overall, the proposed scheme provides efficient mutual authentication between MSAPs especially for tactical environments and is analyzed through performance evaluation to prove its superiority.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.5
• /
• pp.486-496
• /
• 2013

Time synchronization in underwater environment is challenging due to high propagation delay and mobility of sensor nodes. Previous researches do not consider practical issues affecting on the accuracy of time synchronization such as high-channel access delay and relative position between sensor nodes. Also, those protocols using bidirectional message exchange shorten the network lifetime and decrease the network throughput because numerous transmission, reception and unnecessary overhearing can be occurred. Therefore, in our research, we suggest enhanced time synchronization based on features of underwater environment. It controls the instant of transmission by exploiting the feature of an oceanic movement and node deployment. Moreover, the protocol uses more accurate time information by removing channel access delay from the timestamp. The proposed scheme is also practical on the underwater sensor network requiring low-power consumption because the scheme conducts time-synchronization with smaller transmission and reception compared with previous works. Finally, simulation results show that the proposed protocol deceases time error by 2.5ms and 0.56ms compared with TSHL and MU-Sync respectively, reducing energy consumption by 68.4%.

• Journal of Internet Computing and Services
• /
• v.3 no.1
• /
• pp.29-40
• /
• 2002

The information exchange on the using of XML such as B2B electronic is common. So the efficient method to store XML message in database is needed. Because the ORDBMS is extended to ORDBMS for supporting multimedia application such as Oracle8i, 9i, Informix and SQL2000 server, SQL2, the standard RDB is extended to SQL3 for ORDB, And the XML application based on java such as J2EE is extended. Therefor it is necessary for the efficient connection methods based on JDBC between XML application and database system. In this paper, the methodology a transformation XML DTD to SQL3 schema is proposed. For the transformation, first the methods of transformation XML DTD to object model in UML class diagram are proposed. And then the methods of mapping transferred object models to SQL3 schema are proposed. This approach for transform::1lion XML. DTD to SQL3 schema such as Oracle8i, 9i, Informix and SQL2000 server based on java is proposed in this paper, can be used in database design to build XML applications based on ORDB.

• Journal of Korea Society of Industrial Information Systems
• /
• v.19 no.2
• /
• pp.1-13
• /
• 2014

In IEEE 802.11p/1609-based vehicular networks, vehicles are allowed to exchange safety and control messages only within time periods, called control channel (CCH) interval, which are scheduled periodically. Currently, the length of the CCH interval is set to the fixed value (i.e. 50ms). However, the fixed-length intervals cannot be effective for dynamically changing traffic load. Hence, some protocols have been recently proposed to support variable-length CCH intervals in order to improve channel utilization. In existing protocols, the CCH interval is subdivided into safety and non-safety intervals, and the length of each interval is dynamically adjusted to accommodate the estimated traffic load. However, they do not consider the presence of hidden nodes. Consequently, messages transmitted in each interval are likely to overlap with simultaneous transmissions (i.e. interference) from hidden nodes. Particularly, life-critical safety messages which are exchanged within the safety interval can be unreliably delivered due to such interference, which deteriorates QoS of safety applications such as cooperative collision warning. In this paper, we therefore propose a new interference-aware Dynamic Safety Interval (DSI) protocol. DSI calculates the number of vehicles sharing the channel with the consideration of hidden nodes. The safety interval is derived based on the measured number of vehicles. From simulation study using the ns-2, we verified that DSI outperforms the existing protocols in terms of various metrics such as broadcast delivery ration, collision probability and safety message delay.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.4
• /
• pp.91-98
• /
• 2010

Advances in communications and control technology, the strengthening of the Internet, and the growing recognition of the urgency to reduce the risk and production cost are motivating the development of improvements in the traditional manufacturing industry. In this paper, we developed a remote dust collector bag control system which is a combination of advanced IT and traditional dust collector based on the event. At first, we made the A/D(Analog/Digital) converter using a micro processor because the differential pressure transmission, which is a sensor of the dust collector, produces analog volt data. A/D converter can provide RS-232 communication to connect with Power Line Communication(PLC) modem. And, n-bytes message format was defined for the efficient dust collector bag information transmission from a dust collector to a user. Also, we designed the data types to model the dust collector and the dust collector bag, and they were logically modeled using XML and object-oriented modeling method. In addition to that, we implemented the system for showing the dust collector bag exchange time exactly to users at real-time using various visual user interfaces.

• The Journal of the Korea Contents Association
• /
• v.4 no.3
• /
• pp.71-80
• /
• 2004

In distributed file-systems, cooperative caching algorithm which owns the data cached at each node jointly is used to reduce an expense of disk access. Cooperative caching algorithm is the method that increases a cache hit-ratio and decrease a disk access as it holds the cache information of distributed systems in common and makes cache larger virtually. Recently, several cooperative caching algorithms decrease the message costs by using approximate information of the cache and increase the cache hit-ratio by using local and global cache fields dynamically. And they have an advantage that increases the whole field hit-ratio by sending a replaced buffer to the idle node on buffers replacement in order to maintain the replaced cache in the cache field. However the wrong approximate information deteriorates the performance, the consistency maintenance goes to great expense to exchange messages and the cost that manages Age-information of each node to choose the idle node increases. In this thesis, we propose a cooperative cache algorithm that maintains correct cache information, minimizes the maintenance cost for consistency and the management cost for buffer Age-information. Also, we show the superiority of our algorithm through the performance evaluation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.7
• /
• pp.1634-1642
• /
• 2014

Mobile RFID system, that consists of the existing RFID reader mounted on the mobile devices such as smartphones, is able to provide the users a variety of services and convenience. But security of mobile RFID system is too weak like the existing RFID system. In this paper, the mobile RFID mutual authentication protocol with high level of security is proposed to overcome the troubles such as cryptographic protocols in the existing RFID system responding with the same value in every authentication procedure and the exposure in the exchange of messages. The proposed protocol exchanges messages unexposed by using the random numbers generated in the mutual authentication between the tag and the reader and making numbers coded with the symmetric key. Besides, the protocol uses the mutual authentication utilizing OTP by considering the characteristics of the reader embedded in mobile devices in the mutual authentication process between the reader and the server. Because changed message in every authentication, which produces safe from spoofing attacks and replay attacks, etc.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.93-96
• /
• 2017

DDS (Data Distribution Serivce) communication middleware is spreading to various private sector as well as the defense sector because it can obtain a very high application effect in a complex system environment in which a plurality of data producers and data consumers are connected by a network. However, application development using DDS middleware is an inefficient structure with a lot of repetitive codes because most users perform 1: 1 mapping with the message they want to exchange. Accordingly, the user has to perform unnecessary repetitive tasks as the topic increases. Therefore, a development support tool that identifies a series of processes required for using DDS middleware and automatically generates the classes that are repeated by Topic is required. In this paper, we propose a method for DDS communication by automatically generating a common class for efficient use of DDS middleware.