• Imaging Science in Dentistry
• /
• v.42 no.4
• /
• pp.219-224
• /
• 2012

Purpose: This study investigated the relationship between the roots of the maxillary molars and the maxillary sinus using cone beam computed tomography (CBCT), and measured the distances between the roots of the maxillary molars and the sinus floor as well as the thickness of the bone between the root and the alveolar cortical plate. Materials and Methods: The study sample consisted of 83 patients with normally erupted bilateral maxillary first and second molars. A total of 332 maxillary molars were examined using CBCT images. The vertical relationship of each root with the maxillary sinus was classified into four types on CBCT cross-sectional images. The distance between the sinus floor and root and the bone thickness between the root and alveolar cortical plate were measured. Results: In the buccal roots of the maxillary molars, a root protruding into the sinus occurred most frequently. A root projecting laterally along the sinus cavity was most common in the palatal roots of the maxillary first molars. The mesiobuccal roots of the maxillary second molar were closest to the sinus. The mesiobuccal roots of the first molars were closest to the cortical plate. Conclusion: The relationship between the roots of the maxillary molars and the sinus differed between the buccal and palatal roots. A root protruding into the sinus occurred more frequent in the buccal roots of the maxillary molars. The mesiobuccal root of the maxillary second molar was closest to the maxillary sinus floor and farthest from the alveolar cortical plate.

• Restorative Dentistry and Endodontics
• /
• v.40 no.3
• /
• pp.241-248
• /
• 2015

Variation in root canal morphology, especially in maxillary first molar presents a constant challenge for a clinician in their detection and management. This case report describes the successful root canal treatment of a three rooted right maxillary first molar presenting with three canals each in the mesiobuccal and distobuccal roots and one canal in the palatal root. The clinical detection of this morphologic aberration was made using a dental operating microscope, and the canal configuration was established after correlating and computing the clinical, radiographic and cone-beam computed tomography (CBCT) scan findings. CBCT images confirmed the configuration of the canals in the mesiobuccal and distobuccal roots to be Al-Qudah and Awawdeh type (3-2) and type (3-2-1), respectively, whereas the palatal root had a Vertucci type I canal pattern. This report reaffirms the importance of careful examination of the floor of the pulp chamber with a dental operating microscope and the use of multiangled preoperative radiographs along with advanced diagnostic aids such as CBCT in identification and successful management of aberrant canal morphologies.

• Restorative Dentistry and Endodontics
• /
• v.45 no.4
• /
• pp.46.1-46.8
• /
• 2020

Objectives: This study aimed to investigate the incidence and location of the second mesiobuccal root (MB2) canal in maxillary molars with the aid of various measuring points and lines using cone-beam computed tomography (CT). Materials and Methods: A total of 205 images of patients who underwent cone-beam CT examinations between 2011 and 2015 as part of their dental diagnosis and treatment were included. There were 76 images of the maxillary first molar and 135 images of the maxillary second molar. Canal orifices were detected at -1 mm from the top of the pulpal floor on cone-beam CT images. Image assessment was performed by 2 observers in reformatted image planes using software. Assessments included measurement of the distance between the MB1 and MB2 canals, and the angles between the lines connecting the MB1-MB2 and distobuccal (DB)-palatal (P) canals. The data were analyzed using the student's t-test. Results: The prevalence of the MB2 canal was 86.8% in the first molar and 28.9% in the second molar. The angle between the lines connecting the MB1-MB2 and DB-P canals was 2.3° ± 5.7° in the first molar and -3.95° ± 7.73° in the second molar. The distance between the MB1 and MB2 canals was 2.1 ± 0.44 mm in the first molar and 1.98 ± 0.42 mm in the second molar. Conclusions: The angles between the lines connecting the MB1-MB2 and DB-P canals was almost parallel. These findings may aid in the prediction of the location of the MB2 canal orifice.

• Restorative Dentistry and Endodontics
• /
• v.47 no.3
• /
• pp.33.1-33.10
• /
• 2022

Objectives: This study aimed to analyze the proximity of maxillary molar roots to their overlying cortical bone surfaces and the maxillary sinus. Materials and Methods: Cone-beam computed tomographic images of 151 patients with completely erupted upper molars that had 3 separate roots were studied. The following distances were measured: from the root apex to the cortical plate and maxillary sinus floor, and from the apical 3-mm level of the root to the cortical plate. Differences between groups were analyzed with 1-way analysis of variance and the Scheffé post hoc test, the significance of differences between cone-beam computed tomography views with the paired t-test, and the significance of differences among age groups with linear regression analysis. The significance level was set at p < 0.05. Results: The mesiobuccal and distobuccal root apexes of maxillary second molars were more distant from the buccal cortical plate than the maxillary first molars (p < 0.05). The apical 3-mm level of the mesiobuccal root of the first molar was closer to the buccal cortical bone than the second molar (p < 0.05). In the maxillary first molars, the thickness of the buccal cortical bone decreased in all roots with age (p < 0.05). In all root apexes of both molars, the difference in the vertical level between the maxillary sinus floor and the root apex increased with age (p < 0.05). Conclusions: Awareness of the anatomical profile of maxillary molar apices in relation to the cortical bones and maxillary sinus will be beneficial for apical surgery.

• Proceedings of the KACD Conference
• /
• 2002.11a
• /
• pp.680-680
• /
• 2002

No Abstract, See Full Text

• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.2
• /
• pp.139-145
• /
• 2002

In a primary teeth, dental caries is rapidly advanced the pulp disease, because the primary teeth have the thinner and the weaker enamel layer and the wider pulp chamber than relatively the permanent teeth. And the pulps of primary teeth are exposed during caries removal or even they are exposed by unexpected movement of the children or by trauma. For successive pulp treatment in primary teeth, it is necessary to understand completely about multiple canal morphology, variation of root canal anatomy and specific problem related to root formation and resorption of primary teeth. In upper primary molar, canal configuration of mesial root has the most variation same as upper molar. If not canal treatment is completely, most of all endodontic treatment should be failed. In a clinical case report, upper primary molars existed persistent pain or bleeding during treatment were founded the second MB canal and were performed the endodontic treatment of theirs. As a result, the upper primary molars have no symptom and good prognosis. In the examination of extracted upper primary molar, we found that 8 of 35 teeth(22.8%) in the upper primary first molars and 22 of 33 teeth(66.6%) in the upper primary second molar had the second mesiobuccal canal. It has revealed the high prevalence of two canals in mesiobuccal roots of upper primary molars. The frequency of occurrence of the second mesiobuccal canal must be taken into consideration when endodontic treatment is planned and as a possible cause of otherwise un explained failure.

• Restorative Dentistry and Endodontics
• /
• v.20 no.2
• /
• pp.780-788
• /
• 1995

The purpose of this study was to compare the apical seal following root canal shaping by different methods. From fourty extracted mandibular 1st and 2nd molars, fourty mesial roots whose canals have some degree of curvature were selected. The mesiobuccal root portion including mesiobuccal portion of a crown was sectioned in each molar. After access cavity preparation for the mesiobuccal canal, working length was determined with # 10 K-file. The sectioned roots were implanted in acrylic resin block and randomly divided into four groups. The canals of group I were shaped by step-down/balanced force, group II by stepdown/step-back, group III by step-back and group IV by conventional method. All of the shaped canals were obturated by Thermafil method and access cavities were filled with IRM. The roots were removed from acrylic resin block and placed in 100 % humidity for 7days. Except the root surfaces of apical 2mm, the root surfaces were nail-varnished 3 times. After the roots were placed in 700 torr vacuum pressure for 15 minutes, they were immersed in 2% methylene blue solution for 4 days. Nail varnishes were removed with acetone. After that, the roots were decalcified in 5 % nitric acid and dehydrated with alcohol series. Transparent specimens were made by methyl salicylate and the quality of apical seal was assessed by measuring the leakage linearly. The results were as follows. 1. The leakage in canals shaped by step-down/balanced force method was significantly less than that in canals shaped by step-back method(P<0.05) and was less but not statistically than that in canals shaped by step-down/step-back method (P>0.05). 2. The leakage in canals shaped by step-down/step-back method was less than that in canals shaped by step-back method, but there was no statistical significance(P>0.05). 3. The leakage in canals shaped by conventional method was significantly more than that in canals shaped by step-down/balanced force, step-down/step-back and step-back method (P<0.05).

• Restorative Dentistry and Endodontics
• /
• v.42 no.2
• /
• pp.140-145
• /
• 2017

Objectives: The aim of this randomized, controlled, prospective clinical study was to evaluate patients' intraoperative discomfort during root canal preparations in which either multi-file rotary (Mtwo) or single-file reciprocating (Reciproc) systems were used. Materials and Methods: Fifty-five adult patients, aged between 25 and 69 years old, with irreversible pulpitis or pulp necrosis participated in this study. Either the mesiobuccal or the distobuccal canals for maxillary molars and either the mesiobuccal or the mesiolingual canals for mandibular molars were randomly chosen to be instrumented with Mtwo multi-file rotary or Reciproc single-file reciprocating systems. Immediately after each canal instrumentation under anesthesia, patient discomfort was assessed using a 1 - 10 visual analog scale (VAS), ranging from 'least possible discomfort' (1) to 'greatest possible discomfort' (10). The Wilcoxon signed-rank test was used to determine significant differences at p < 0.05. Results: Little intraoperative discomfort was found in all cases. No statistically significant differences in intraoperative discomfort between the 2 systems were found (p = 0.660). Conclusions: Root canal preparation with multi-file rotary or single-file reciprocating systems had similar and minimal effects on patients' intraoperative discomfort.

• Proceedings of the KACD Conference
• /
• 2003.11a
• /
• pp.589-590
• /
• 2003

Mesiobuccal or distobuccal canals of maxillary molars and mesiobuccal or mesiolingual canals of mandibular malars were selected. Forty specimens were divided into four groups according to the instruments used : stainless steel K-files($MANI^{\circledR}$, Matsutani Seisakusho Co. Takanezawa, Japan), nickel-titanium K-files (Naviflex $NT^{TM}$, Brassler, Savannah, U.S.A.), $Profile^{\circledR}$, and $ProTaper^{TM}$ (Dentsply-Maillefer, Ballaigues, Switzerland). Occlusal surface of each tooth and root apex were flattened by using diamond burs and sandpaper. Before instrumentation, a rubber stop was fixed with glue to the ＃10 K-files of initial working length in each tooth.(omitted)

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.2
• /
• pp.95-102
• /
• 2020

Purpose:The aim of the present study was to evaluate the incidence of the second mesiobuccal (MB2) canal, root fusion, and C-shaped root canal configuration in the Korean maxillary first (MM1) and second (MM2) molars by analyzing cone-beam computed tomographic (CBCT) images. Materials and methods: Patients undergoing presurgical CBCT examination were included in the current study. The CBCT images of 1498 MM1 and 1742 MM2 from 1658 Korean patients were assessed to determine the incidence of a MB2 canal, the types of canal configurations, root fusion, and C-shaped root canal configurations. Further, the correlations between the incidence of MB2 canal and age, gender, and tooth position were analyzed. Results: The study population was relatively old (mean age: 66.1 years). The percentage of MB2 canals in MB roots was 60.1% and 28.0% in MM1 and MM2, respectively, with the most common configurations being Weine type III in MM1 and Weine type II in MM2. Additionally, the frequency of a MB2 canal decreased with age in both molars and was higher in men than in women in the MM1 only. Furthermore, root fusion was present in 2.3% and 26.2% of the MM1 and MM2, respectively, whereas C-shaped root canals were observed in 0.4% and 2.7% of the MM1 and MM2, respectively. Conclusion: The MB2 canal was found more frequently in the MM1, whereas root fusion and C-shaped root canals were both seen more frequently in the MM2.