• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.13 no.1
• /
• pp.107-115
• /
• 1983

This study was performed in order to analyse the morphology of maxillary sinus on orthopantomogram. The author anlaysed the anterior-posterior width of mesial wall, the extension of anterior margin in maxillary sinus and the interrelation between the root apex of maxillary 1st molar and sinus floor. The films consisted of 514 orthopantomograms divided into three groups ranging the 3rd decade, 4th and 5th decade and 6th decade. The obtained results were as follows: 1. The mean dimensions of the anterior - posterior width of mesial wall were 43.81±4.55㎜ for male and 43.80±4.49㎜for female in the right of maxillary sinus, 43.75±74㎜ for male and 43.37±3.92㎜ for female. 2. With age, the dimensional change of the anterior - posterior width of mesial wall in maxillary sinus was not observed. 3. The extension order of anterior margin of the maxillary sinus was distal to canine side, 1st premolar mesial side, canine mesial side, and 1st premolar distal side. 4. In the distance between the root apex of upper 1st molar and the maxillary sinus floor, the degree of closeness was more increased in the older-aged group than in the younger-aged group.

• Restorative Dentistry and Endodontics
• /
• v.15 no.2
• /
• pp.115-121
• /
• 1990

Forty extracted human mandibular second molars with C-shaped canal were chosen to study the anatomy of the root canal. The experimental teeth were injected with china ink, decalcified and cleared with Winter green oil, in vitro, to study the number of root, root canal, canal per root, frequency and location of lateral canal and transverse anastomosis. 1. All teedth had one root. 2. Mesial roots with two canals were 25%, and mesial roots with one canal were 75%. All distal roots had one canal. 3. In the roots with two canals, the common apical foramen appeared in 20% and the separte apical foramen appeared in 80%. 4. The frequence of lateral canal was 33.3% and the most frequent region was middle 1/3. 5. All teeth had the transverse anastomosis in all region of the roots.

• Imaging Science in Dentistry
• /
• v.33 no.1
• /
• pp.15-20
• /
• 2003

Purpose : To investigate the reproducibility of the conventional and digital radiographs to determine the depth of approximal root cavities. Materials and Methods : A total of 80 artificial root cavities were prepared in the approximal surfaces of premolars, maxillary and mandibular molars. Standardized radiographs were taken at the baseline (0° horizontal and 0° vertical) and at a horizontal angulation of 10° in both mesial and distal directions. Radiographic cavity depths were measured by both conventional and digital radiographs. Results: At 0° horizontal angulation, no statistically significant differences could be determined between the results of conventionally and digitally determined radiographic depths with respect to the actual cavity depths in all premolar, maxillary, and mandibular molar groups. All conventional and digital radiographic depths at both 10° mesial and distal angulations showed statistically significant increases in depth compared to the actual cavity depths (p < 0.05), with the exception of digital radiographic depth at 10° mesial angulation for premolars. There were no statistically significant differences between conventional and digital radiographic depths for all groups. Conclusion: The present study suggests that both conventional and digital radiographs provide reproducible assessment of the depth of the approximal root cavity. But horizontal X-ray beam movements are likely to result in increase in radiographic cavity depth.

• Journal of Periodontal and Implant Science
• /
• v.38 no.1
• /
• pp.103-108
• /
• 2008

Purpose: Studies reported controversial results about prognosis of root resection with 0%-38% failure rate. The purpose of this study is to consider clinical efficacy of root resection. Materials and Methods: This study reported three cases of root resection which were performed on different sites. In first case, lower right first molar showed pus discharge and 7 mm of probing pocket depth. It was diagnosed as fracture of mesial root. Hemisection of mesial root was performed. In second case, upper right first molar showed severe bone loss on disto-buccal root and 7 mm of probing pocket. Resection of disto-buccal root was performed In third case, lower left second molar showed severe bone loss on distal root including apex and 15mm of probing pocket depth. Hemisection of distal root was performed. Result: In these three cases of root resection, compromised molars were treated successfully and conserved. Conclusion: Root resection is a successful procedure treating compromised multi-rooted teeth and conserving teeth when proper case selection is performed.

• The Journal of the Korean dental association
• /
• v.17 no.7 s.122
• /
• pp.525-528
• /
• 1979

958 healthy Korean children aged from 2 to 11 years old (male: 500 female:458) were studied on the root resorption of the mandibular first deciduous molar. The Results were as follows: 1. The resorption of mandibular first deciduous molar in female was earlier than male. 2. The patterns of the initial resorption of mandibular first deciduous molar were as follows Distal root is resorbed by the Successor ; 55.92% Both roots are resorbed by the Successor simultaneously ; 30.51% Mesial root is resorbed by successor ; 6.33% Mesial root is resorbed by the mandibular first bicuspid and canine ; 4.08% Bifurcation area is resorbed by the successor; 3.16% 3. The Exfoliation period of mandibular first deciduous molar was 10 years 1month in female and 10 years 4 months in male.

• The Journal of Advanced Prosthodontics
• /
• v.16 no.4
• /
• pp.212-220
• /
• 2024

PURPOSE. This cone-beam computed tomography (CBCT) study aimed to analyze the anatomical characteristics of alveolar bone at mandibular first molar (MFM) and their implications for immediate implant placement surgery. MATERIALS AND METHODS. 100 patients with 140 MFMs were reviewed retrospectively. We first performed a 3D reconstruction of the patient's CBCT data to determine a reference plane with ideal implant placement and orientation. The following parameters of MFM region were analyzed: mesial-distal socket size (MDSS), buccal-lingual socket size (BL-SS), root furcation fornix to inferior alveolar nerve (IAN) distance (RF-I), interradicular bone thickness (IRB), mesial/distal root apex to the IAN distance (MRA-I/DRA-I), thickness of the buccal/lingual bone of the mesial root (MR-B/MR-L), thickness of the buccal/lingual bone of the distal root (DR-B/DR-L). RESULTS. The MD-SS of MFM was 8.74 ± 0.76 mm, and the BLSS was 8.26 ± 0.72 mm. The MR-B, DR-B was 1.01 ± 0.40 mm and 1.14 ± 0.50 mm, and the difference was statistically significant (P = .001). The values of the MR-L, DR-L were 2.71 ± 0.78 mm and 3.09 ± 0.73 mm, and the difference was also statistically significant (P < .001). The mean distance of RF-I was 15.68 ± 2.13 mm, and the MRA-I was 7.06 ± 2.22 mm, which was greater than that of DRA-I (6.48 ± 2.30 mm, P < .001). The IRB at 2 mm, 4 mm apical from the furcation fornix, and at apex level was 2.81 ± 0.50 mm, 3.30 ± 0.62 mm, and 4.44 ± 1.02 mm, respectively. CONCLUSION. There is relatively sufficient bone mass in interradicular bone in height, but an adequate width is lacking for the bone between the mesial and distal root after the extraction of the MFM for immediate implantation. The thickness of the MFM buccal bone is relative thin, especially for the mesial root.

• The korean journal of orthodontics
• /
• v.51 no.6
• /
• pp.366-374
• /
• 2021

Objective: This study investigated the impact of a single piezocision in the maxillary alveolar process on the speed of tooth movement. The null hypothesis was that the speed of tooth movement will be equal with and without piezocision. Methods: All maxillary molars on one side were moved against the combined incisors in 10 ten-week-old male Wistar rats. Under general anesthesia, a force of 25 cN was applied on either side using a Sentalloy closed coil spring. After placing the orthodontic appliance, vertical corticision was performed using a piezotome under local anesthesia, 2 mm mesial from the mesial root of the first molar on a randomly selected side; the other side served as the control. At the beginning of the treatment, and 2 and 4 weeks later, skull micro-computed tomography was performed. After image reconstruction, the distance between the mesial root of the first molar and the incisive canal, and the length of the mesial root of the first maxillary molar were measured. Moreover, the root resorption score was determined as described by Lu et al. Results: Significantly higher speed of tooth movement was observed on the corticision side; thus, the null hypothesis was rejected. The loss of root length and root resorption score were significantly more pronounced after piezocision than before. A strong correlation was observed between the speed of tooth movement and root resorption on the surgical side, but the control side only showed a weak correlation. Conclusions: Piezocision accelerates orthodontic tooth movement and causes increased root resorption.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.4
• /
• pp.637-642
• /
• 2003

Morphology of primary root divergency and curvature determines the pattern of root resorption and periapical lesion, and affects successful root canal treatment. With the purpose of analysing the morphology of primary mandibular second molar roots and canals, the frequency, angle, radius, and start of curvature of the canal were measured. Fifty clinical radiographs were taken from $3{\sim}6$ years old children, followed by digitizing after scanning and analyzing by Scion image Beta 4.02TM(Scion Co. USA). The angle of curvature was determined by Schneider's method and the radius of curvature was determined by Schaefer's method. The results were as follows: 1. The angle of curvatures were $17.3^{\circ}{\pm}5.0$ (mesial), and $27.9^{\circ}{\pm}6.0$ (distal). Distal curvature was significantly larger than mesial.(p<0.05) 2. The radius of curvatures were $8.7mm{\pm}2.5$ (mesial), and $5.8\;mm{\pm}1.5$ (distal). Mesial curvature was significantly larger than distal.(p<0.05) 3. The start of curvatures were $4.1mm{\pm}0.6$ (mesial), and $4.2mm{\pm}0.6$ (distal). There were no difference between two groups. (P<0.05)

• Proceedings of the KACD Conference
• /
• 2003.11a
• /
• pp.577-577
• /
• 2003

Microcomputed tomography (MCT) made it possible to investigate the morphology of root canals more accurate. The aim of this study was to compare the effects of four root canal shaping methods, the profile system, the ProTaper system, a combination of these, and stainless steel K-files, in the shaping of the mesial root canals of extracted human mandibular first molars, three-dimensionally using MCT. Eight extracted mandibular first molars were scannde using MTC before and after the root cannals were instrumented. Two specimens were prepared using the Profile system and another two specimens were prepared using MCT before and after the root cannals were instrumented. Two specimens were prepared using the Profile system and another two specimens were prepared using the ProTaper system according to manufactures recommendation.(omitted)

• The korean journal of orthodontics
• /
• v.32 no.5 s.94
• /
• pp.343-353
• /
• 2002

This study was designed to investigate the stress distribution of alveolar bone in case of on masse retraction with lingual K-loop archwire using the 3-dimensional photoelastic stress analysis followed by stress freezing process. Lingual K-loop archwire which had loop in 15mm height was used and activated by retraction force of 350gm per each side. The results were as follows 1. Central incisor : As the closer side to crown, the larger tensile stress was distributed at both mesial and labial surfaces and the larger compressive stress was distributed at distal surface. As the closer side to root apex, the larger compressive stress was distributed at lingual surface. The compressive stress was distributed at root apex. 2. Lateral incisor : The tensile stress was distributed at the coronal side of mesial surface. The compressive stress was distributed at distal surface. As the closer side to crown, the larger tensile stress was distributed at labial surface. The tensile stress was distributed at coronal side and the compressive stress was distributed at apical side of lingual surface. The compressive stress was distributed at root apex. 3. Canine The tensile stress was distributed at coronal side and the compressive stress was distributed at apical side of mesial surface. The tensile stress was distributed at distal surface. As the closer side to crown, the larger tensile stress was distributed at both mesial and distal surfaces. The compressive stress was distributed at root apex. 4. Second premolar : The tensile stress was distributed at mesial surface. The compressive stress was distributed at coronal side and the tensile stress was distributed at apical side of distal surface. The compressive stress was distributed at coronal side of buccal surface. As the closer side to crown, the larger tensile stress was distributed at lingual surface. The compressive stress was distributed at root apex. 5. First molar . As the closer side to crown, the larger tensile stress was distributed at both mesial and distal surfaces. No stress was distributed at buccal surface and palatal root apex. As the closer side to crown, the larger tensile stress was distributed at both lingual surfaces. The compressive stress was distributed a4 buccal root apexes. 6. Second molar The compressive stress was distributed at all root apexes. As the closer side to crown, the larger compressive stress was distributed at both mesial and lingual surfaces, and the larger tensile stress at both distal and buccal surfaces. Transverse bowing effect was observed in on-masse retraction with lingual K-loop archwire, however vertical towing effect was not. Rather, reverse vortical bowing effect was developed.