• Archives of Plastic Surgery
• /
• 제39권1호
• /
• pp.31-35
• /
• 2012

Background : Orbital roof fractures are frequently associated with a high energy impact to the craniofacial region, and displaced orbital roof fractures can cause ophthalmic and neurologic complications and occasionally require open surgical intervention. The purpose of this article was to investigate the clinical features and treatment outcomes of orbital root fractures combined with neurologic injuries after early reconstruction. Methods : Between January 2006 and December 2008, 45 patients with orbital roof fractures were admitted; among them, 37 patients were treated conservatively and 8 patients underwent early surgical intervention for orbital roof fractures. The type of injuries that caused the fractures, patient characteristics, associated fractures, ocular and neurological injuries, patient management, and treatment outcomes were investigated. Results : The patients underwent frontal craniotomy and free bone fragment removal, their orbital roofs were reconstructed with titanium micromesh, and associated fractures were repaired. The mean follow up period was 11 months. There were no postoperative neurologic sequelae. Postoperative computed tomography scans showed anatomically reconstructed orbital roofs. Two of the five patients with traumatic optic neuropathy achieved full visual acuity recovery, one patient showed decreased visual acuity, and the other two patients completely lost their vision due to traumatic optic neuropathy. Preoperative ophthalmic symptoms, such as proptosis, diplopia, upper eyelid ptosis, and enophthalmos were corrected. Conclusions : Early recognition and treatment of orbital roof fractures can reduce intracranial and ocular complications. A coronal flap with frontal craniotomy and orbital roof reconstruction using titanium mesh provides a versatile method and provides good functional and cosmetic results.

• 한국대기환경학회지
• /
• 제8권2호
• /
• pp.93-99
• /
• 1992

Recently a passive $NO_2$ samplers have been frequently used for the measurement of $NO_2$ concentration in the atmosphere because of its simplicity and high accuracy. But these samplers have a defect that the amount of $NO_2$ adsorbed is increased by wind. In this study, the inlet of sampler was covered with a draft shield made by 325 mesh stainless sieve to eliminate the effect. But it was expected that $NO_2$ diffusion was interrupted by the draft shield. In order to conform this phenomenon, samplers with and without draft shield were exposed to a box filled with 1-1.1ppm $NO_2$. The result indicated that draft shield nearly did not disturb $NO_2$ diffusion. To protect samplers from dust, sunshine, precipitation and vertical wind effects, these samplers were placed into a shelter during the field test. The data obtained in this study was compared with the data from the ambient air monitoring network. The coefficient of correlation(r) between the two data was 0.9995 for the test period of up to 35days. The results of this study indicate that the type of $NO_2$ samplers with draft shield in shelter used in this study can be used for measuring $NO_2$ concentrations in the ambient air relatively for a long period over 30 days.

• 한국지반환경공학회 논문집
• /
• 제6권3호
• /
• pp.35-45
• /
• 2005

낙석방지울타리는 국내에서 가장 보편적으로 사용되는 낙석방지공법의 하나로 일반적으로 H형강, 와이어메쉬 및 와이어로프의 세 부분으로 구성되며 이들에 의해 발휘되는 낙석방지울타리의 총 흡수가능에너지가 낙석에너지보다 커야한다는 것을 기본적인 설계개념으로 한다. 본 연구에서는 기존 낙석방지울타리의 와이어메쉬와 와이어로프 대신, 새로운 재료인 팽창메탈을 사용한 낙석방지울타리의 성능을 평가하고 기존의 낙석방지울타리와 비교하였다. 이를 위하여 팽창메탈 낙석방지울타리와 기존 방식의 낙석방지울타리에 대하여 실내 및 현장시험을 실시하였으며, 그 결과 팽창메탈 낙석방지울타리의 흡수가능에너지는 기존 낙석방지울타리와 비교해 높은 것으로 나타나 팽창메탈은 성능 및 경제적인 면에서 기존 재료에 비해 우수한 재료임을 보였다.

• 대한치과보철학회지
• /
• 제44권4호
• /
• pp.414-420
• /
• 2006

Purpose : The purpose of this study is to use finite element analysis to predict the fatigue life of an implant system subjected to fatigue load by mastication (chewing force). The reliability and the stability of implant system can be defined in terms of the fatigue strength. Not only an implant is expensive but also it is almost impossible to correct after it is inserted. From a bio-engineering standpoint, the fatigue strength of the dental implant system must be evaluated by simulation (FEA). Material and Methods Finite element analysis and fatigue test are performed to estimate the fatigue strength of the implant system. Mesh of implant is generated with the actual shape and size. In this paper, the fatigue strength of implant system is estimated. U-fit (T. Strong, Korea, internal type). The stress field in implant is calculated by elastic-plastic finite element analysis. The equivalent fatigue stress, considering the contact and preload stretching of a screw by torque for tightening an abutment, is obtained by means of Sine's method. To evaluate the reliability of the calculated fatigue strength, fatigue test is performed. Results: A comparison of the calculated fatigue strength with experimental data showed the validity and accuracy of the proposed method. The initiation points of the fatigue failure in the implant system exist in the region of high equivalent fatigue stress values. Conclusion: The above proposed method for fatigue life estimation tan be applied to other configurations of the differently designed and improved implant. In order to prove reliability of prototype implant, fatigue test should be executed. The proposed method is economical for the prediction of fatigue life because fatigue testing, which is time consuming and precision-dependent, is not required.

• 대한전자공학회논문지
• /
• 제25권9호
• /
• pp.1115-1124
• /
• 1988

A two-dimensional systolic array for fast Fourier transform, which has a regular and recursive VLSI architecture is presented. The array is constructed with identical processing elements (PE) in mesh type, and due to its modularity, it can be expanded to an arbitrary size. A processing element consists of two data routing units, a butterfly arithmetic unit and a simple control unit. The array computes FFT through three procedures` I/O pipelining, data shuffling and butterfly arithmetic. By utilizing parallelism, pipelining and local communication geometry during data movement, the two-dimensional systolic array eliminates global and irregular commutation problems, which have been a limiting factor in VLSI implementation of FFT processor. The systolic array executes a half butterfly arithmetic based on a distributed arithmetic that can carry out multiplication with only adders. Also, the systolic array provides 100% PE activity, i.e., none of the PEs are idle at any time. A chip for half butterfly arithmetic, which consists of two BLC adders and registers, has been fabricated using a 3-um single metal P-well CMOS technology. With the half butterfly arithmetic execution time of about 500 ns which has been obtained b critical path delay simulation, totla FFT execution time for 1024 points is estimated about 16.6 us at clock frequency of 20MHz. A one-PE chip expnsible to anly size of array is being fabricated using a 2-um, double metal, P-well CMOS process. The chip was layouted using standard cell library and macrocell of BLC adder with the aid of auto-routing software. It consists of around 6000 transistors and 68 I/O pads on 3.4x2.8mm\ulcornerarea. A built-i self-testing circuit, BILBO (Built-In Logic Block Observation), was employed at the expense of 3% hardware overhead.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.392-392
• /
• 2011

Carbon nanotubes (CNT) emitter has widely become an attractive mechanism that draws growing interests for cold cathode field emission.$^{1,2}$ CNT yarns have demonstrated its potential as excellent field emitters.$^3$ Extensive simulations were carried out in designing a CNT yarn-based cathode assembly. The focal spot size dependence on the anode surface of the geometric parameters such as axial distance of the electrostatic focus lens from the cathode and the applied bias voltages at the cathode, grid mesh and electrostatic focus lens were studied. The detailed computer simulations using Opera 3D electromagnetic software$^4$ had revealed that a remarkable size of focal spot under a focusing lens triode type set-up design was achieved. The result of this optimization simulation would then be applied for the construction of the CNT yarn based micro-focus x-ray tube with its field emission characteristics evaluated.

• Journal of Microbiology and Biotechnology
• /
• 제24권11호
• /
• pp.1566-1573
• /
• 2014

Although most algae cultivation systems are operated in suspended culture, an attached growth system can offer several advantages over suspended systems. Algal cultivation becomes light-limited as the microalgal concentration increases in the suspended system; on the other hand, sunlight penetrates deeper and stronger in attached systems owing to the more transparent water. Such higher availability of sunlight makes it possible to operate a raceway pond deeper than usual, resulting in a higher areal productivity. The attached system achieved 2.8-times higher biomass productivity and total lipid productivity of $9.1g\;m^{-2}day^{-1}$ and $1.9g\;m^{-2}day^{-1}$, respectively, than the suspended system. Biomass productivity can be further increased by optimization of the culture conditions. Moreover, algal biomass harvesting and dewatering were made simpler and cheaper in attached systems, because mesh-type substrates with attached microalgae were easily removed from the culture and the remaining treated wastewater could be discharged directly. When the algal biomass was dewatered using natural sunlight, the palmitic acid (C16:0) content increased by 16% compared with the freeze-drying method. There was no great difference in other fatty acid composition. Therefore, the attached system for algal cultivation is a promising cultivation system for mass biodiesel production.

• Korean Chemical Engineering Research
• /
• 제46권1호
• /
• pp.50-55
• /
• 2008

RF plasma CVD법을 이용하여 금속 촉매(Fe)가 증착된 $SiO_2$ 기판 위에 $H_2$와 $C_2H_2$의 혼합가스를 사용하여 증착된 탄소나노튜브(carbon nanotube, CNT)의 특성에 대한 기판의 온도의 영향을 조사하였다. $SiO_2$ 위에 철 촉매는 RF 마그네트론 스퍼터에 의해 만들어졌다. 고 순도의 나노튜브 박막을 얻기 위해서 기판 홀더 위에 접지된 그리드 메쉬 커버를 설치하였다. 증착된 CNT의 표면 미세구조 및 화학적 구조를 SEM, Raman, XPS, 그리고 TEM으로 측정하였다. 증착된 CNT 박막들은 대나무 같은 다중벽 구조를 가지는 탄소 파이버 형태였으며 $55^{\circ}C$에서 보다 $600^{\circ}C$에서 보다 더 치밀한 구조를 보이나 $650^{\circ}C$에서는 밀도가 다소 감소함을 알 수 있었다.

• 대한기계학회논문집A
• /
• 제31권4호
• /
• pp.472-482
• /
• 2007

This study deals with the design and implementation results for a high-capacity vol-oxidizer that can convert Uranium Dioxide pellets to $U_3O_8$ powder for up to several tens of kg HM/batch. We developed two versions of the $1^{st}$ vol-oxidizer and the $2^{nd}$ vol-oxidizer. Through an experiment with the $1^{st}$ vol-oxidizer, we deduced some problems concerning the design considerations such as the recovery rate of $U_3O_8$, the oxidation time of the Uranium Dioxide pellets, the exothermic reaction, and the powder dispersion. From the analyses of the drawbacks of the $1^{st}$ vol-oxidizer, we devised some novel items such as a folding type mesh, vibrators, and mixing blades. Also, we used the Stokes and Density ratio Eq. to determine the most reasonable flux for preventing a powder dispersion. Compared with the results of the $1^{st}$ vol-oxidizer, we showed that both the permeability of the $U_3O_8$ powders and the oxidation rate of the Uranium Dioxide pellets of the $2^{nd}$ vol-oxidizer were remarkably increased, and the temperature of the reactor was controlled well in spite of an exothermic reaction. Also, the powder was not entirely dispersed through the outlet of the voloxidizer. The experimental results of this work can help in the design of a novel and efficient vol-oxidizer with a higher capacity.

• 산업기술연구
• /
• 제9권
• /
• pp.29-41
• /
• 1989

A general study on the upgrading of mica minerals which are mainly found in pegmatite deposits was carried out for the purpose of developing a technique for recovering mica in form of comercial grade products. By the way the grade one of about 5~6% $K_2O$ still is not developed. The target of this research work is to be establish a process for the efficient concentration of muscovite, containing more than 10% $K_2O$. The tests are applied to incraese the recovery and grade of concentrates in term of variations of conditions. The test sample consists of mainly muscovite and gangue mineral such as quartz, pyrite and chlorite. Decantation and shaking table tests were ineffective to up-grade this low grade one, but flotation method gave satisfactory result. By means of grade one, but flotation method gave satisfactory result. By means of grindability tests, an optimum result could be obtained from the sample ground to -48mesh feed size. The flotation result indicates that the dodecyl ammonium chloride used as a cationic collector is effective on the negatively charged surface, while the sodium dodecyl sulfate as an anionic collector is effective on the positively charged surface. Muscovite was floated by petroleum sulfonate as well as amine type collector, it also floated by MIBC as well as pine oil frother under well condition. Fine muscovite concentrates of about 10.68% $K_2O$ was obtained with 22.4% yield, by decantation, the muscovite concentrates of 10.10% $K_2O$ was obtained with 23.54% yield, by table concentration, the muscovite concentrates of 11.51% $K_2O$ was obtained with 23.0% yield by flotation.