• 한국수산과학회지
• /
• 제30권6호
• /
• pp.916-922
• /
• 1997

This paper attempted to estimate mesh selectivity of gill nets for neon flying squid in the north Pacific Ocean. The 11 linear regressions, (P<0.05) were obtained using the data on catch ratios derived from mesh size combinations between two slightly different mesh sizes of 12 kinds of research gillnet (namely 33, 37, 42, 48, 55, 63, 72. 76, 86, 96, 105 and 115 mm in stretched mesh size). There was an increase in the optimum length with the increase in mesh size but standard deviation showed somewhat increase with the increase in the mesh size. The selectivity curves were well fitted to the length frequency distributions obtained from samples for the mesh sizes from 48 mm through 86 mm. For the mesh sizes of 33, 37 and 42 mm the DML (Dorsal Mantle Length) compositions were distributed towards the right hand-limb of the curves. The DML distributions from the 96 mm and larger meshes showed a trend towards the left hand-limb of the curves. The selectivity curves for different mesh sizes indicate that large mesh sizes catch a greater size range of squid, and the gill net fishery in the north Pacific Ocean captures effectively neon flying squid within the range of $9\~43cm$ DML.

• 수산해양기술연구
• /
• 제48권4호
• /
• pp.352-359
• /
• 2012

For rebuilding and managing fish stocks and fisheries, the biological and socioeconomic evaluations on fisheries management regulations are important. This study aimed to estimate the economic effectiveness of different mesh sizes in the yellow croaker gillnet fishery. In particular, by comparing economic effects of mesh sizes, 50mm and 52mm, it aimed to provide the economic validity for increasing mesh sizes. Analytical results showed that the fishing revenue was higher in the vessels using a mesh size over 52mm than that in the vessels using a mesh size less than 50mm. In addition, the effect of fishing cost reduction was also larger in the vessels using a mesh size over 52mm than that in the vessels using a mesh size less than 50mm.

• 수산해양기술연구
• /
• 제57권3호
• /
• pp.185-193
• /
• 2021

This study was conducted to evaluate the performance of the octopus pot according to mesh sizes. Entering behavior of Octopus minor and bait (Macrophthalmus japonicus) escape rate on the mesh sizes of the pots were investigated for six times in indoor tank. The sea trials for evaluating the performance of Octopus minor pot to different mesh sizes (22, 20 and 18 mm) were conducted for six times from 2017 to 2018 in the coastal sea of Deukyang Bay, the Republic of Korea. Behavior patterns of contact pot to leaved pot were more frequent than contact pot to bait search. When the octopus contacted to the pot, there was no clear search behavior to distinguish the mesh sizes. Total catch of 46% was accounted for 18 mm pots, followed by 34% at 20 mm and 20% at 22 mm (P < 0.05). Catch per unit effort was calculated as 30 g/pot at 22 mm, 44 g/pot at 20 mm and 59 g/pot at 18 mm. As a result of evaluating 50% selection of mantle length and weight on the mesh sizes, mantle length (mm) and weight (g) were 84.6 and 147.8 in 22 mm, followed by 20 and 18 mm.

• 수산해양기술연구
• /
• 제28권4호
• /
• pp.371-379
• /
• 1992

In order to analyse the mesh selectivity for the trawl net, the fishing experiment was carried out by the training ship Saebada in the southern Korea Sea and the East China Sea from June 1991 to August 1992. The trawl net used in experiment has the trouser type of cod-end with cover net, and the mesh selectivity was examined for the five kinds of the opening mesh size in its cod-end part. The selection curves and the selection parameters were calculated by using a logistic function, S=1/(1+exp super(-(aL+b))), and in this case, a and b are the selection parameters and L is the body length of the target species of fishes. In this report, the four species of aquatic animals were analysed because the catch data were enough to calculate normally the selection curves and the selection parameters, and the results obtained are summarized as follows: 1. Trachurus japonicus; Selection parameters a and b in each cases of the opening mesh size of 51.2mm, 70.2mm, 77.6mm, 88.0mm and 111.3mm were respectively 0.5050 and -5.4283, 0.3018 and -4.9590, 0.3816 and -7.3659, 0.2695 and -5.7958, 0.2170 and -5.1226. 2. Photololigo edulis ; Selection Parameters a and b in each cases of the former mesh sizes were respectively 0.7394 and -6.1433, 0.3389 and -4.2366, 0.3286 and -5.1002, 0.2543 and -5.0049, 0.1795 and -4.8040. 3. Trichirus lepturus; Selection curves in the opening mesh size of 111.3mm was calculated unnormally. The selection parameters in the other opening mesh sizes were respectively 0.3790 and -5.2891, 0.2071 and -4.9164, 0.1292 and -3.1733, 0.1153 and -3.8497 in the order of former mesh sizes except 111.3mm. 4. Todarodes pacificus ; Selection curve in case of the opening mesh sizes, 70.2mm and 111.3mm were calculated unnormally. In the order cases of the opening mesh sizes, the selection parameters were respectively were 0.5766 and -6.0169, 0.3735 and -5.4633, 0.2771 and -5.7718 in the order of former mesh sizes except 70.2mm and 111.3mm.

• 한국식품위생안전성학회지
• /
• 제13권3호
• /
• pp.196-200
• /
• 1998

멸치를 이용한 식품의 품질을 향상시키기 위해 멸치의 분말 크기에 따른 저장 안전성과 칼슘의 용출 정도의 상관관계에 대하여 연구하였다. 1. 분말 크기가 AV와 POV에 미치는 영향은 통멸치 <35<50<80 mesh로 증가하였으나 영향은 그리 크지 않은 것으로 나타났다. 2. 저장 기간이 AV와 POV에 미치는 영향은 24<48<72<96<120<시간의 순으로 증가하였으며, AV 2.0 고 POV 60.0을 임시기준으로 설정할 경우 모든 시료는 실온에서 6~18개월 저장 가능하였으며, 저장 6개월은 최대의 안정시기, 12개월은 2차 안정시기 , 18개월은 주의를 요하는 안정시기로 나타났다. 3. 분말 크기에 따른 Ca 용출량은 통멸치<35<50<80 mesh의 순서로 증가하였으며, P 용출량은 35>50>80 mesh의 순으로 감소하여 Ca:P의 비율은 80 mesh에 1:3.99~4.99로 가장 낮게 나타났다. 4.가열시간에 따른 Ca과 P 용출량은 10분<20분≤30분의 순으로 증가하였으며, Ca:P은 30분에서 1:4.06~4.59로 가장 낮게 나타났다. 5.80 mesh, 30분 가열시 Ca 용출량이 52.5390mg으로 가장 높았으며, 이는 통멸치 31.5698mg보다 65.9%높게 나타났고, P의 용출량은 209.7907mg으로 Ca:P=1:3.99로 가장 낮아 영향 전인 측면에서 가장 의의가 있는 것으로 판단된다.

• 한국산업보건학회지
• /
• 제1권1호
• /
• pp.82-88
• /
• 1991

Determination of Cu, Fe, Ni, Pb, and Zn concentrations in coal and respirable coal dust were performed by atomic absorption spectrophotometry. The coal samples of 18 coal mines in Gangneung area were collected and 25 coal mines in Taebaek area. Crushed coal samples were divided into three mesh sizes. The results were as follows : 1. Metal concentrations of coals in Gangneung area by sieve sizes( -100/+200 mesh, -200/+325 mesh, -325 mesh) were as follows: Cu ; 20, 18, 19, Fe ; 1,830, 1,765, 1,107, Pb ; 6, 8, 14, Ni ; 17, 17, 14, Zn ; 4, 2, $4{\mu}g/g$, respectively. Metal concentrations in coals in Taebaek area by sieve sizes(-100/+200 mesh, -200/+325 mesh, -325 mesh) were as follows: Cu ; 30, 32, 26, Fe ; 1,741, 1,822, 1,773, Pb ; 8, 9, 7, Ni ; 13, 13, 13, Zn ; 8, 5, $4{\mu}g/g$, respectively. There were not significant differences of Cu, Fe, Ni, Pb, and Zn concentrations of coals statistically in Gangneung and Taebaek area by sieve size. 2. Metal concentrations of coals in Gangneung and Taeback area were as follows : Cu ; 19, 30, Fe ; 1,514, 1,778, Pb ; 9, 8, Ni ; 16, 13, Zn ; 3, $6{\mu}g/g$, respectively. Differences of copper and zinc concentrations of coal samples were significant between Gangneung and Taebaek area, but those of iron, nickel and lead concentrations were not significant. 3. Copper, iron, lead, nickel and zinc concentrations of coals and respirable coal dust were as follows : Cu ; 30, 6, Fe ; 1,779, 5,075, Pb ; 8, 7,814, Ni ; 13, 5,681, Zn ; 5, $134{\mu}g/g$, respectively. Differences of nickel, lead and zinc concentrations were significant between coals and respirable coal dust but those of copper and iron concentrations were not significant.

• 수산해양기술연구
• /
• 제29권3호
• /
• pp.177-182
• /
• 1993

In order to estimate the mesh selectivity master curves and the optimum mesh size, experiments were made by the cover net method with the cod-ends of the five different the opening mesh sizes(51.2mm, 70.2mm, 77.6mm, 88.0mm and 111.3mm). After that 163 hauling were performed and there by investigated, on the training vessel Saebada in the Southern Korean Sea and East China Sea from June 1991 to August 1992. In this report, the mesh selectivity master curves were fitted by using logistic function(S=1/(1+exp super(-(aR+b))), R=(L-L sub(0))/(M-M sub(0)) and the optimum mesh sizes were estimated from each master curve. In this case, a and b are the selection parameters, M is the mesh size of each experimental cod-end. L is body length, L sub(0) and M sub(0) is the distance from the coordinate origine to intersection of linear regression between 25% and 50% selection length. The results obtained are summarized as follows; 1. Trachurus japonicus: Mesh selectivity master curve parameters: a and b were 2. 25, -4.73 respectively and optimum mesh size was estimated to be 79.3mm. 2. Trichiurus lepturus: Mesh selectivity master curve parameters: a and b were 0.81, -3.17 respectively and optimum mesh size was estimated to be 64.5mm. 3. Photololigo edulis: Mesh selectivity master curve parameters: a and b were 1.30m, -4.10 respectively and optimum mesh size was estimated to be 89.9mm. 4. Todarodes pacificus: Mesh selectivity master curve parameters: a and b were 1. 35, -3.45 respectively and optimum mesh size was estimated to be 89.4mm.

• 수산해양기술연구
• /
• 제46권3호
• /
• pp.223-231
• /
• 2010

This paper showed the difference between the selectivity of gill net by least square method with polynomials in Kitahara's and that by maximum likelihood analysis for Japanese sandfish and Korean flounder. Catch experiments for Japanese sandfish using commercial vessels off the eastern coast of Korea were conducted with six different mesh sizes between October and December 2007 and those for Korean flounder with five different mesh sizes between 2008 and 2009. The mesh size of 50% probability of catch corresponding to biological maturity length of fish was not different between that by least square method and that by maximum likelihood analysis for Japanese sandfish, however, a little different for Korean flounder, that is, those mesh sizes of 50% probability of catch for biological maturity length of Korean flounder were 10.6cm and 10.1cm by least square method and maximum likelihood analysis, respectively.

• 수산해양기술연구
• /
• 제28권4호
• /
• pp.360-370
• /
• 1992

In order to analyse the mesh selectivity for the trawl net, the fishing experiment was carried out by the training ship Saebada belonging to the National Fisheries University, in the Southern Korea Sea and the East China Sea from June 1991 to August 1992. The trawl net used in the experiment has the trouser type of cod-end with cover net and the mesh selectivity in the cod-end part. In this report, the species of fishes caught and the catch rate for them in accordance with different mesh sizes were analysed, and the result obtained are summarized as follows: 1) 145 species of aquatic animals were caught in totally 138 times of trawl operations. 2) The number of species mostly not to escape are 28, 22, 19, 16 and 11 respectively, in each opening mesh size, 51.2mm, 70.2mm, 77.6mm, 88.0mm and 111.3mm of cod-end. 3) In view that the use of the opening mesh size above 54mm in cod-end of trawl net in Korea, it is necessary to device a counterplan against the overfishing, for the 22 species of aquatic animals mostly not to escape in the cod-end of the large mesh sizes more than 70.2mm.

• Applied Biological Chemistry
• /
• 제31권1호
• /
• pp.13-20
• /
• 1988

쌀보리(무안보리, 송학, 새쌀보리 및 늘쌀보리)를 입자 크기별로 분류하고 $40^{\circ}C$에서의 수분 흡수 특성을 비교하였다. 쌀보리의 주를 이루는 입자는 7mesh이었고 다음이 10mesh로서 이들 입자는 무안보리는 86% 나머지는 $91{\sim}94%$를 차지하였다. 입자의 길이, 폭, 부피, 표면적 및 무게는 입자크기가 작아질수록 작아졌으나 길이와 폭의 비는 반대로 증가하였다. 쌀보리의 침지 중 수분 증가량은 입자가 작아질수록 증가하였다. 쌀보리의 주를 이루는 7mesh입자의 경우 수분증가량은 늘쌀보리, 송학, 새쌀보리, 무안보리의 순서이었으며 시료 모두 침지시간 35시간에 평형 수분함량에 도달하였다. 쌀보리의 확산계수는 입자가 작아질수록 증가하였으나 6 및 7mesh입자는 서로 비슷한 값을 보였다. 쌀보리의 침지 중 부피증가량은 수분증가량과 직선적인 관계를 보였다.