• 한국정밀공학회지
• /
• 제3권3호
• /
• pp.40-71
• /
• 1986

By developing a computer program for the systematic design of worm gears, the design formulae and tables of AGMA, JGMA, BS and DIN are analized and compared. The computer program can be used on micro-computers. According to the input data of the reduction ratio, the center distance. the driving torque and the material as design parameters, the program calculate the most efficient worm gear dimension. The variation of the design parameters and other empirical coefficients in case of resulting an inadequate design gear dimension can be easily modified throuth the way of interactive method between the user and the monitoring system of computer. A proposal of the standardization of worm gears was made in which a standard module according to the DIN 323 standard series number was applied. For the more exact and effective calculation of the stress concentration and the deformation of gear teeth, a computer program using the boundary element method is also developed. Even the strength of the special gear shape such as Niemann's "Cavex" gear can be calculated in a short CPU-time. The most effort of this study has been layed on the developing a computer program for the correction of a tooth profile and face width which is most important design factor for an exact and wide teeth contacts under loads, especially by great and wide gears. For this purpose were investigated the tooth stiffness, the mesh interferences and the kinematics and the dynamics of gear mesh. The deflection and the deformation of the gear shaft due to the loads acting on gear and shaft were aslo considered. Some examples have shown the sufficient good status of teeth contact in which the correction of the tooth profile and face width were accomplished due to the calculated results.d results.

• 한국가스학회지
• /
• 제4권4호
• /
• pp.25-33
• /
• 2000

최근 들어 가혹한 온도 및 압력조건에서 운전이 요구되는 고온배관들의 잔여수명예측은 상당히 중요한 관심사로 부각되고 있다. 이에 고온손상을 정량적으로 평가하여 설비를 안전하게 사용하기 위한 유지기술 및 수명평가 기술을 확보하는 것은 매우 중요하다. 한편 이러한 고온배관내 대부분의 균열은 반타원 표면균열의 형태로 형상화되어 파괴역학의 실제응용에서 발견할 수 있는 가장 복잡한 형상과 하중특성을 갖게 된다. 이를 배경으로 본 연구에서는 먼저 축방향 및 원주방향 반타원 표면균열이 존재하는 직관의 완전 3차원 유한요소망 자동생성 프로그램을 작성하였다. 이렇게 생성된 유한요소 입력자료를 이용하여 3차원 유한요소 해석을 수행하면 반타원 표면균열선단을 따른 고온 크리프 파괴 지배변수 $C^{\ast}$-적분값을 구할 수 있다. 또한 $C^{\ast}$-적분값에 준해 균열진전량을 계산하는 후처리 균열진전 모듈을 추가하여 사용자 편의 수명평가 프로그램을 개발하였다. 최종적으로 개발된 통합 수명 평가 프로그램을 이용하여 여러 가지 해석변수들의 반타원 표면균열을 갖는 고온 직관 수명에 대한 영향을 살펴보았다.

• 만화애니메이션 연구
• /
• 통권48호
• /
• pp.199-215
• /
• 2017

최근 군사적 목적으로 제작된 드론의 활용이 일반적인 용도로 그 사용처가 확대되고 있다. 콘텐츠 제작에 있어 드론이 활발하게 사용되고 있는데 특히 영상 촬영 분야에서 가장 눈에 띄게 나타나고 있다. 본 논문에서는 드론에서 촬영된 2차원 영상 데이터를 이용하여 포인트 클라우드 및 3차원 모델을 생성하고 메쉬 데이터를 3차원 라이브러리로 모듈화한 플랫폼을 개발한다. 이를 위하여 먼저 드론을 이용하여 2차원 영상 데이터를 취득하고, 취득된 2차원 영상 데이터를 기반으로 하여 포인트 클라우드를 생성하고, 추출된 포인트 클라우드를 3차원 메쉬 데이터로 변환한 후 변환되어진 3차원 데이터를 다양한 분야에 활용될 수 있도록 서비스 라이브러리 플랫폼을 개발한다. 본 논문에서 개발된 플랫폼은 촬영된 데이터를 3차원 데이터로 변환하여 영화, 드라마, 다큐멘터리 등의 제작 시에 특수 영상을 위한 실제 세트 제작 비용 절감 및 시간을 단축 할 수 있고, 실감 미디어 및 특수 영상, 전시 영상 분야의 디지털 콘텐츠 제작 전문 인력 창출에 기여 할 수 있다.

• 소성∙가공
• /
• 제9권3호
• /
• pp.233-241
• /
• 2000

It is well known that the quality and efficiency of the design of metal forming processes can be significantly improved with the aid of effective numerical simulations. In the present study, a two-and three-dimensional finite element simulation system, CAMP form, was developed for the analysis of metal forming processes in the PC environment. It is composed of a solver based on the thermo-rigid-viscoplastic approach and graphic user interface (GUI) based pre-and post-processors to be used for the effective description of forming conditions and graphic display of simulation results, respectively. In particular, in the case of CAMPform 2D (two-dimensional), as the solver contains an automatic remeshing module which determines the deformation step when remeshing is required and reconstructs the new mesh system, it is possible to carry out simulations automatically without any user intervention. Also, the forming analysis considers ductile fracture of the workpiece and wear of dies for better usage of the system. In the case of CAMPform 3D, general three-dimensional problems that involve complex die geometries and require remeshing can be analyzed, but full automation of simulations has yet to be achieved. In this paper, the overall structure and computational background of CAMPform will be briefly explained and analysis results of several forming processes will be shown. From the current results, it is construed that CAMPform can be used in providing useful information to assist the design of forming processes.

• 한국정보과학회논문지:시스템및이론
• /
• 제36권3호
• /
• pp.158-170
• /
• 2009

본 논문에서는 3차원 하이퍼큐브 Q3를 기본모듈로 갖는 새로운 토러스 네트워크를 제안한다. 제안한 하이퍼-토러스는 분지수 4를 갖고, 확장성, 지름이 좋은 연결망이다. 토러스 부류를 망비용 관점에서 비교하면 하이퍼-토러스는 $1.4{\sqrt{N}}$+16으로 토러스의 망비응 $4{\sqrt{N}}$보다 대략 65% 개선되었고, 허니컴 토러스의 망비용$ 2.45{\sqrt{N}}$보다 대략 50% 개선된 값이다. 이러한 결과는 하이퍼-토러스가 기존의 메시 부류보다 망비용 관점에서 우수함을 의미한다.

• 한국CDE학회논문집
• /
• 제13권6호
• /
• pp.459-468
• /
• 2008

A web-based Computer-Aided Engineering (CAE) supporting system is connected with a Product Data Management (PDM) system for Small and Medium Enterprises (SMEs) suffering from the lack of building hardware, software and related experts. An analysis of current business models and worksite requirements provides an improved process model and data to be shared between the PDM system and the CAE supporting system. Since all engineering tasks such as geometric modeling, mesh generation, static stress and modal analysis, and fatigue durability analysis are automated in the CAE supporting system, the user in charge of the CAE have only to configure the concerned values of design variables and result data through the web page. The existing Change Management module of the PDM system is modified for seamless data exchange, i.e. sending the Engineering Change Order (ECO) data to the CAE supporting system and receiving the CAE result data bark. The hi-directional data transfers between the PDM system and the CAE supporting system is made possible by adaptors bused on the Simple Object Access Protocol (SOAP). The current approach will be very helpful for SMEs that only have the PDM system and have no adequate infrastructure for CAE.

• 한국조경학회지
• /
• 제27권4호
• /
• pp.137-142
• /
• 1999

The purpose of this study is to develope a CAD-based tool for rasterization of polygonal vector map in AutoCAD. To identity the layer property of polygonal entity with user-defined coordinates as topology, algorithm in processing entity data of selection set that intersected with scan line was used, and the layers were extracted sequentially by sorted intersecting points in data-list. In addition to the functions for querying and modifying topology, two options for mapping were set up to construct plan projection type and to change meshes' properties in existing DTM data. In case of plan projection type, user-defined cell size of 3DFACE mesh is available for more detailed edge, and topological draping on landform can be executed in case of referring DTM data as an AutoCAD's drawing. The concept of algorithm was simple and clear, but some unexpectable errors were found in detecting intersected coordinates that were AutoCAD's error, not the utility's. Also, the routines to check these errors were included in algorithmic processing. Developed utility named MESHMAP was written in entity data control functions of AutoLISP language and dialog control language(DCL) for the purpose of user-oriented interactive usage. MESHMAP was proved to be more effective in data handling and time comparing with GRIDMAP module in LANDCADD which has similar function.

• Structural Engineering and Mechanics
• /
• 제37권2호
• /
• pp.197-213
• /
• 2011

Concrete is a heterogeneous material exhibiting quasi-brittle behaviour. While homogenization of concrete is commonly accepted in general engineering applications, a detailed description of the material heterogeneity using a mesoscale model becomes desirable and even necessary for problems where drastic spatial and time variation of the stress and strain is involved, for example in the analysis of local damages under impact, shock or blast load. A mesoscale model can also assist in an investigation into the underlying mechanisms affecting the bulk material behaviour under various stress conditions. Extending from existing mesoscale model studies, where use is often made of specialized codes with limited capability in the material description and numerical solutions, this paper presents a mesoscale computational model developed under a general-purpose finite element environment. The aim is to facilitate the utilization of sophisticated material descriptions (e.g., pressure and rate dependency) and advanced numerical solvers to suit a broad range of applications, including high impulsive dynamic analysis. The whole procedure encompasses a module for the generation of concrete mesoscale structure; a process for the generation of the FE mesh, considering two alternative schemes for the interface transition zone (ITZ); and the nonlinear analysis of the mesoscale FE model with an explicit time integration approach. The development of the model and various associated computational considerations are discussed in this paper (Part 1). Further numerical studies using the mesoscale model for both quasi-static and dynamic loadings will be presented in the companion paper (Part 2).

• 한국공간구조학회논문집
• /
• 제12권1호
• /
• pp.43-50
• /
• 2012

최근 컴퓨터 기술의 발달로 인해 복잡한 형태를 가지는 기념비적인 건축물이 설계, 시공됨에 따라 비정형건축에 관한 사회적인 관심이 해외뿐만 아니라 국내에서도 증가하고 있다. 하지만 비정형 구조시스템의 구현하기 위한 기술 및 연구에 대한 사례가 부족하여 많은 어려움이 있다. 이러한 문제를 해결하기 위해 본 연구에서는 3D모델링 프로그램과 최적설계를 수행하는 프로그램간의 인터페이스 모듈에 대한 연구를 수행하였다. 3D 모델링 프로그램에서 자동 메쉬를 생성하고, 모델링에 대한 정보를 바로 추출하여 최적화를 수행하였다. 결과적으로 개발된 인터페이스 모듈의 검증을 위해 예제 모델을 선정하여 형상최적화을 수행하였다.

• 전기학회논문지
• /
• 제59권7호
• /
• pp.1302-1308
• /
• 2010

In this study, Zigbee Sensor Node to transmit harmful gases CO and $CO_2$ information using wireless communication within the ground and underground structures were developed. Wireless communication protocol was used Zigbee Stack included IEEE 802. 15.4 MAC protocol. For wireless transmission of detected harmful gas signal from ADC of MCU was implemented Zigbee Sensor Node that was developed protocol using Serial-Port-Profile(SPP) here. The proposed Zigbee Sensor Node was verified transmission distance from experiments. Transmission distance was into 90m in experiments. Distance experiments were measured at 10m intervals using sine & pulse wave input signal at indoors. The proposed Route Sensor Node was applied mesh routing protocol. When built up USN(Ubiquitous Sensor Network)using Route Sensor Node, transmission distance was not limited. On the experimental results, harmful gas values between direct measurements and USN measurements were consistent. The semiconductor CO sensor and N-DIR $CO_2$ sensor module as a harmful sensor was used. Therefore, the proposed Zigbee Sensor Node was verified about reliability and validity to build USN for transmission of harmful gas information.