• 제목/요약/키워드: Mesh Surface

검색결과 801건 처리시간 0.024초

고압 균질기를 이용하여 형성된 셀룰로오스 나노결정의 결정 구조 및 화학적 결합 특성 연구 (Crystal structural property and chemical bonding nature of cellulose nanocrystal formed by high-pressure homogenizer)

  • 최철종;박래만;심규환
    • 한국결정성장학회지
    • /
    • 제34권3호
    • /
    • pp.79-85
    • /
    • 2024
  • 고압 균질기를 이용하여 면 셀룰로오스 원료로부터 직접 셀룰로오스 나노결정을 추출하고 이에 대한 결정 구조 및 화학적 결합 상태에 대한 연구를 수행하였다. 형성된 셀룰로오스 나노결정은 나노와이어 형태의 구조적 특성을 가지며, 조밀한 구조의 메쉬 형태로 분포하였다. X-ray diffraction (XRD) 분석을 통해 관찰된 Bragg 결정면의 면간거리 계산을 통해 고압 균질기로부터 추출된 셀룰로오스 나노결정이 셀룰로오스 Iβ 하부 다형체인 monoclinc 결정구조를 갖음을 확인하였다. 셀룰로오스 나노결정에 포함된 비정질 영역을 정량적으로 평가하기 위한 Solid-state nuclear magnetic resonance(NMR) 분석 결과 셀룰로오스 나노결정의 결정화도 지수는 5 3.06 %로 계산되었다. 형성된 셀룰로오스 나노결정 표면의 O/C ratio는 0.82로 계산되었으며, C-C 결합 혹은 C-H 결합, C-O 결합, O-C-O 결합 혹은 C=O 결합, O-C=O 결합의 화학적 결합이 셀룰로오스 나노결정 표면의 주요 화학적 상태임을 알 수 있었다.

내화처리(耐火處理)가 파아티클보오드와 콤플라이보오드의 기계적성질(機械的性質) 및 내화도(耐火度)에 미치는 영향(影響) (Effects of Fire Retardant Treatment on Mechanical Properties and Fire Retardancy of Particleboard and Complyboard)

  • 권진헌;이필우
    • Journal of the Korean Wood Science and Technology
    • /
    • 제13권4호
    • /
    • pp.3-57
    • /
    • 1985
  • 본(本) 시험(試驗)에 있어서 파아티클보오드와 콤플라이보오드용(用)의 칩은 공(共)히 메란티 수종(樹種)(Shorea spp.)을 팔만칩퍼로 제조(製造)하였으며 콤플라이보오드의 표층단판(表層單板)의 수종(樹種)은 아피통(Dipterocarpus spp.)을 사용(使用)하였다. 칩의 크기는 6메쉬를 통과(通過)하고 25 메쉬위에 남는 것을 이용(利用)하였으며 콤플라이보오드의 단판(單板)두께는 0.9mm, 1.6mm 및 2.3mm의 것을 사용(使用)하였고 접착제(接着劑)로는 요소수지(尿素樹脂)를 파아티클의 전건조량(全乾燥量)에 대(對)해 10%첨가(添加)한 후 성형(成型)하여 파아티클보오드를 만들었고 표층용단판(表層用單板)의 접착(接着)에는 36g/(30.48cm)$^2$을 도포(塗布)하였다. 내화약제(耐火藥劑)로는 제2인산(第二燐酸)암모늄, 황산(黃酸)암모늄, 제1인산(第一燐酸)암모늄, 파이래소트, 미나리스의 5종(種)에 대(對)해 단판(單板)에는 20% 농도(濃度)로 파아티클에는 5, 10, 15, 20%의 농도(濃度)로 침지법(浸漬法)을 적용(適用)하여 처리(處理)하였다. 이런 조건(條件)으로 만든 내화(耐火)파아티클보오드와 콤플라이보오드의 물성(物性) 기계적(機械的) 성질(性質) 및 내화도(耐火度)를 조사(調査)하여 내화처리(耐火處理)파아티클 및 콤플라이보오드 제조가능성(製造可能性)을 구명(究明)하고져 하였다. 본(本) 연구(硏究)에서 얻은 결론(結論)을 요약(要約)하면 다음과 같다. 1. 파아티클보오드와 콤플라이보오드의 5종(種)의 약제보유량중(藥劑保有量中) 5% 황산(黃酸)암모늄처리(處理)가 1.34kg/(30.48cm)$^3$로 가장 적었으나 모두가 최저보유량(最低保有量) 1,125kg/(30.48cm)$^3$ 보다도 높은 것을 나타내었다. 2. 파아티클보오드와 콤플라이보오드의 파괴계수(破壞係數), 탄성계수(彈性係數), 박리강도(剝離强度) 및 나사못 유지력(維持力)은 제2인산(第二燐酸)암모늄처리(處理)가 다른 약제처리(藥劑處理)보다 우수(優秀)하였다. 3. 내화처리(耐火處理)콤플라이보오드의 파괴계수(破壞係數) 및 탄성계수(彈性係數)는 내화처리(耐火處理)파아티클보오드보다 더 양호(良好)한 결과(結果)를 나타내었다. 4. 내화처리(耐火處理)콤플라이보오드의 두께 팽창율(膨脹率)은 내화처리(耐火處理)파아티클보오드의 것보다 훨씬 적었다. 5. 파이레소트와 미나리스처리(處理)는 파아티클보오드와 콤플라이보오드의 함수율(含水率)을 증가(增加)시켰으나 제1인산(第一燐酸)암모늄처리(處理)는 오히려 함수율(含水率)을 감소(減少)시켰다. 6. 내화처리(耐火處理)콤플라이보오드는 착화(着火)가 되지 않았고 내화처리(耐火處理)콤플라이보오드는 착화(着火)는 되었지만 대조구(對照區)에 비(比)해 착화시간(着火時間)이 훨씬 지연(遲延)되었다. 또한 단판(單板)만 내화처리(耐火處理)한 콤플라이보오드는 착화(着火)되어 잔염(殘炎)은 있으나 대조구(對照區)에 비(比)해 그 잔염시간(殘炎時間)이 훨씬 짧았다. 단판(單板)과 중층(中層)파아티클보오드에 처리(處理)한 콤플라이보오드는 착화(着火)는 되었으나 잔염(殘炎)은 없었다. 7. 불꽃의 길이, 탄화면적(炭化面積) 및 중량감소율(重量減少率)은 대조구(對照區)에 비(比)해서 훨씬 적었으나 약제간(藥劑間)에 차이(差異)는 없었다. 8. 시험(試驗)한 5종(種)의 약제(藥劑)에서 내화처리(耐火處理)파아티클보오드의 이면온도(裏面溫度)는 처리농도(處理濃度)가 증가(增加)함에 따라서 감소(減少)하는 경향(傾向)을 나타내고 있다. 9. 내화처리(耐火處理)파아티클보오드의 이면온도(裏面溫度)가 가장 높은 약제(藥劑)는 파이레소트처리(處理)이고 가장 낮은 약제(藥劑)는 미나리스처리(處理)였다. 10. 내화처리(耐火處理)콤플라이보오드의 이면온도(裏面溫度)는 대조구(對照區)에 비(比)해서 현저히 낮았다.

  • PDF

수종의 흡수성 차단막의 생체 분해도와 조직학적 반응 (Resorbability and histological reaction of bioabsorbable membranes)

  • 석헌주;권석훈;김창성;최성호;전동원;김종관
    • Journal of Periodontal and Implant Science
    • /
    • 제32권4호
    • /
    • pp.781-800
    • /
    • 2002
  • The major goals of periodontal therapy are the functional regeneration of periodontal supporting structures already destructed by periodontal disease. There have been many efforts to develop materials and therapeutic methods to promote periodontal wound healing. With the development of non-resorbable membrane, GTR has proved to be the representive technique of periodontal regeneration. However, due to various clinical problems of non-resorbable membrane, resorbable membrane was developed and it showed to be clinically effective. The newly developed Para-Dioxanone membrane has a characteristic of non-woven fabric structures which is different from the generally used membranes with structure of mesh form. In addition, Chitosan membrane has been developed to apply its adventage maximally in GTR. Although a number of different types of membranes had been clinically used, researches on absorption rate of membranes were inadequate and limited to subjective opinions. However, since long term period of resorption and space maintenance are required in implant or ridge augmentation, accurate verification of resorption rate is clinically important. In this study, we had implanted Resolut(R), Biomesh(R), Para-Dioxanone membrane and Chitosan membrane (Size : 4mm ${\times}$ 4mm) on dorsal side of Sprague Dawley rat, and sacrified them after 4 weeks, 8 weeks, 12 weeks respectively. Histologic observation was carried out, and the following results were obtained by calculating the objective resorption rate. 1. In case of Resolut(R), external resorption took place initially, followed by internal resorption. Surface area are 5.76${\pm}$2.37$mm^2$, 4.90${\pm}$l.06$mm^2$, 4.90${\pm}$0.98$mm^2$ at 4 weeks, 8 weeks, 12 weeks respectively, and invasion rate of connective tissue to membrane are 31.6${\pm}$4.5%, 52.8${\pm}$9.4%, 56.4${\pm}$5.1% respectively. 2. Biomesh(R) showed a pattern of folding, relatively slow resorption rate with small size of membrane. Surface area are 3.62${\pm}$0.82$mm^2$, 3.63${\pm}$0.76$mm^2$, 4.07${\pm}$1.14$mm^2$ at 4 weeks, 8 weeks, 12 weeks respectively, and invasion rate of connective tissue to membrane are 26.1${\pm}$5.8%, 30.9${\pm}$3.4%, 29.2${\pm}$3.6%, respectively. 3. Para-Dioxanone membrane was surrounded by fibrous conncetive tissue externally, and resorption took place internally and externally. Surface area are 5.96${\pm}$1.05$mm^2$, 4.77${\pm}$10.76$mm^2$, 3.86${\pm}$0.84$mm^2$ at 4 weeks, 8 weeks, 12 weeks respectively, and invasion rate of connective tissue to membrane are 30.7${\pm}$5.1%, 53.3${\pm}$4.4%, 69.5${\pm}$3.1%, respectively. 4. Each fiber of Chitosan membrane was surrounded by connective tissue and showed external resorption pattern. It showed little invasion of inflammatory cells and excellent biocompatability. The resorption rate was relatively slow. Surface area are 6.01${\pm}$2.01$mm^2$, 5.49${\pm}$1.3$mm^2$, 5.06${\pm}$1.38$mm^2$ at 4 weeks, 8 weeks, 12 weeks respectively, and invasion rate of connective tissue to membrane are 31.3${\pm}$3.6%, 38.4${\pm}$3.80%, 39.7${\pm}$5.6%, respectively. Consequently, Para-Dioxanone membrane and Chitosan membrane are found to be clinically effective for their excellent tissue reaction and biocompatibility. Futhermore, the advantage of bone regenerating ability as well as the relatively long resorption period of Chitosan membrane, it might be widely used in implant or ridge augmentation.

백합나무를 이용하여 제조한 3층 파티클보드와 배향성 스트랜드보드(OSB)의 물성에 관한 연구 (Study on the Physical and Mechanical Properties of Particleboard and Oriented Strandboard Manufactured by Tulliptree (Liriodendron tulipifera L.))

  • 서준원;강길우;조건희;박헌
    • Journal of the Korean Wood Science and Technology
    • /
    • 제46권1호
    • /
    • pp.67-72
    • /
    • 2018
  • 본 연구에서는 주요 조림수종으로 선정된 백합나무를 이용하여 파티클보드(PB)와 배향성 스트랜드보드(OSB)를 제조하여 보드 원료로서의 가능성을 확인하였다. 두께 15 mm, 밀도 $0.7g/cm^3$의 파티클보드와 두께 10 mm, 밀도 $0.65g/cm^3$의 OSB를 제조하였으며, 파티클보드 공장에서 상용하고 있는 $E_1$ 등급의 요소 폼알데하이드 수지와 왁스, 경화제를 첨가하여 실제 생산, 유통하는 보드제품과 최대한 유사하게 제작조건을 맞추었다. 제조된 보드의 품질시험 결과, PB의 경우, 평균두께 15.8 mm, 평균밀도 $0.71g/cm^3$, 함수율은 5.8% 기준에 적합하였다. 휨강도는 KS 규격(KS F 3104)의 13형 이상($13.0N/mm^2$ 이상), 박리강도는 18형 이상($0.3N/mm^2$ 이상), 나사못 유지력은 평면에서는 18형 이상(700 N 이상), 측면 15형 이상(300 N 이상)의 품질을 만족시켰다. 그러나 휨강도가 박리강도, 나사못유지력에 비해서 낮은 강도를 나타내는데 이것은 파티클 길이/두께의 비율(Slenderness ratio)이 영향을 미친 것으로 판단된다. OSB의 경우, 평균두께 10.7 mm, 평균밀도 $0.68g/cm^3$, 함수율은 6.3%로 KS F 3104 기준에 적합하였으며, 휨강도 18형 이상($18.0N/mm^2$ 이상), 나사못유지력 18형 이상(700 N 이상), 박리강도 13형 이상($0.20N/mm^2$ 이상)의 품질을 만족시켰다.

리그노셀룰로오스 섬유 기반 활성탄-첨가 섬유판 필터의 미세먼지 저감장치용 적용가능성 평가 (Evaluating the Applicability of Activated Carbon-added Fiberboard Filters Fabricated with Lignocellulosic Fiber for the Reduction Equipment of Particulate Matter)

  • 양인;소재민;황정우;최준원;이영규;최원실;오승원;문명철
    • Korean Chemical Engineering Research
    • /
    • 제59권4호
    • /
    • pp.548-556
    • /
    • 2021
  • 본 연구는 부직포의 환경오염 문제를 해결하기 위하여 리그노셀룰로오스 섬유와 야자각 활성탄(CSA)을 이용한 미세먼지-저감 여과필터의 제조 가능성을 조사하였다. CSA의 경우, 휘발성 유기화합물(VOC)과 유해금속의 저감을 위한 여과필터 제조용 원료로서 적용 가능성을 확인하였으며, CSA의 VOC 저감효과는 목섬유보다 5배 이상으로 측정되었다. 돈모, 인모, 돈혈과 같은 단백질계 원료와 낙엽송 수피 열수 추출물을 이용하여 조제한 천연접착제를 적용하여 최소 200 kg/m3의 목표밀도와 함께 최대 40 wt%의 CSA로 제조된 섬유판은 취급이 가능한 강도를 보유한 것으로 나타났다. 그러나 이 조건에서 제조된 섬유판의 경우, 통기성이 낮아 이를 해결하기 위하여 통기구를 가진 섬유판의 제조가 요구되었다. 활성탄으로 사용한 CSA는 강도 및 성형성을 고려하여 입자의 크기는 2 mesh 이상으로 조절이 필요하였고, 표층에는 목섬유만 심층에는 목섬유와 활성탄으로 구성된 3층 섬유판으로 제조하는 방안이 최적조건으로 도출되었다. 한편 필터지(한지)는 우수한 미세먼지 여과능을 가진 것으로 조사되었으며, 결과적으로 타공 섬유판과 함께 한지로 구성된 여과필터 세트가 부직포로 생산되고 있는 기존 여과필터를 대신하여 실내외 공간에 존재하는 미세먼지외에 VOC와 유해금속 등의 저감장치용 여과필터로서 사용이 가능한 것으로 나타났다.

목재(木材)파아티클과 철선(鐵線) 복합체(複合體)가 보오드의 물리적(物理的) 및 기계적(機械的) 성질(性質)에 미치는 영향(影響) (Effects of Wood Particles and Steel Wire Compositions on Physical and Mechanical Properties of the Boards)

  • 박헌;이필우
    • Journal of the Korean Wood Science and Technology
    • /
    • 제14권1호
    • /
    • pp.3-44
    • /
    • 1986
  • 목재(木材)파아티클과 성질(性質)이 전혀 다른 철선(鐵線)을 물리적(物理的)으로 결합(結合)시킴으로써 목재(木材)와 철재(鐵材)의 재료적(材料的) 특성(特性)을 서로 보완(補完)하여 목재(木材)파아티클과 철선(鐵線)의 새로운 복합체(複合體)인 목질(木質)-철선(鐵線)보오드를 제조(製造)하고 그 특성(特性)을 구명(究明)하여 기초자료(基礎資料)를 얻고자 하였다. 메란티 합판제조폐재(合板製造廢材)을 이용(利用)한 팔만칩을 12mesh를 통과하고 20mesh체에 남는 큰 파아티클과 20mesh을 통과하고 60mesh체에 남는 작은 파아티클로 구분하여 요소수지를 분무한 다음, 굵기 1mm인 철선(鐵線)을 나비방향과 길이방향으로 1, 2 및 3층(層)으로 배열하여 성형(成型)하고 시험용(試驗用) 복합(複合) 파아티클 보오드를 제조하였다. 1층(層) 철선구성(鐵線構成)보오드의 경우에는 철선간(鐵線間)의 배치간격(配置間隔)을 나비방향과 길이방향(方向)으로 각기 0.5cm, 1cm, 1.5cm, 2cm 및 2.5cm 등(等) 5가지로 하여 24가지의 철선구성방법(鐵線構成方法)으로 하였으며, 2층(層) 철선구성(鐵線構成 )보오드는 철선구성간격(鐵線構成間隔)을 1cm로 하였고 철선구성방법(鐵線構成方法)을 3가지로 하였으며, 3층(層) 철선구성(鐵線構成)보오드는 철선구성간격(鐵線構成間隔)을 1cm로 하고 철선구성방법(鐵線構成方法)을 11가지로 하여 제조(製造)한 보오드는 대조(對照)보오드를 포함(包含)하여 312개였다. 보오드를 성형(成型)한 열압온도(熱壓溫度) 160$^{\circ}C$, 악력(壓力) 35kgf/$cm^2$, 열압시간(熱壓時間) 9분(分)으로 하여 보오드를 제조(製造)하고 이 목질(木質) 철선복합(鐵線複合)보도드의 물리적(物理的) 및 기계적(機械的) 성질(性質)을 측정(測定)분석(分析)한 바 다음과 같은 결과(結果)를 얻었다. 1. 큰 파아티클과 작은 파아티클로 제조(製造)한 보오드에서 철선구성층수(鐵線構成層數) 및 구성철선(構成鐵線)의 수(數)가 많은 보오드일수록 그 비중(比重)은 컸었다. 2. 큰 파아티클로 제조(製造)한 보오드는 철선구성(鐵線構成)으로 인하여 두께팽창율(膨脹率)의 감소(減少)가 뚜렷하였으며 특히 철선구성층수(鐵線構成層數)가 많을수록 이 팽창율(膨脹率)은 더 개선되었다. 3. 큰 파아티클 및 작은 파아티클로 제조(製造)한 보오드 공(共)히 철선구성층수(鐵線構成層數)가 증가(增加)함에 따라 철선(鐵線)의 강도적(强度的) 특성(特性)이 파아티클 휨강도(强度) 성질(性質)을 보강(補强)하여 파괴계수(破壞係數), 탄성계수(彈性係數), 휨 극한하중(極限荷重) 일량(量) 등(等)이 개선(改善)되었으며, 2층(層) 및 3층(層) 철선구성(鐵線構成)보오드의 경우 보오드의 하층(下層)의 철선구성방향(鐵線構成方向)이 보오드의 길이방향(方向)과 일치(一致)하는 보오드가 특(特)히 큰 휨강도(强度) 향상(向上)을 보여 인장라미네이션을 얻었다. 4. 1층(層) 철선구성(鐵線構成)보오드는 철선구성간격(鐵線構成間隔)에 따른 개구면적(開口面積)과 파아티클의 크기에 따라 파괴계수(破壞係數), 탄성계수(彈性係數), 휨 극한하중(極限荷重) 일량(量) 등(等)이 다르게 나타났으나, 큰 파아티클로 제조(製造)한 보오드의 파괴계수(破壞係數)는 개구면적(開口面積)이 1.5~3$cm^2$이고, 나비 방향(方向)의 철선구성간격(鐵線構成間隔)이 1~2cm이면서 길이방향(方向)의 철선구성간격(鐵線構成間隔)이 1.5~2.5cm인 보오드가 높은 값을 나타냈고 작은 파아티클로 제조(製造)한 보오드의 파괴계수(破壞係數)는 개구면적(開口面積)이 0.5~1.5$cm^2$ 및 3.75~6.25$cm^2$이고 나비 방향(方向)의 철선간격(鐵線間隔)이 0.5cm이거나 2.5cm인 보오드가 높은 값을 나타냈다. 5. 큰 파아티클로 제조(製造)한 1층(層) 철선구성(鐵線構成)보오드의 탄성계수(彈性係數)는 개구면적(開口面積)이 1.5~3$cm^2$이고 나비방향(方向) 및 길이방향(方向)의 철선구성간격(鐵線構成間隔)이 1~2.5cm에서 큰 값을 나타냈으며, 한편 작은 파아티클로 제조(製造)한 보오드의 탄성계수(彈性係數)는 개구면적(開口面積)이 0.75~1.25$cm^2$ 민 3~6.25$cm^2$이고, 나비방향(方向)의 철선구성간격(鐵線構成間隔)이 0.5 또는 2.5cm에서 큰 값을 나타내었다. 6. 큰 파아티클로 제조(製造)한 1층(層) 철선구성(鐵線構成)보오드의 휨 극한하중(極限荷重) 일량(量)은 개구면적(開口面積)이 1~3$cm^2$인 보오드가 큰 값을 보였고, 작은 파아티클로 제조(製造)한 보오드의 경우의 그것은 철선(鐵線)의 개구면적(開口面積)이 좁은 것이 크게 나타났다. 7. 박리저항(剝離抵抗) 및 나사못보지력(保持力)은 큰 파아티클로 제조(製造)한 3층(層) 및 2층(層) 철선구성(鐵線構成)보오드에서 대부분(大部分) 대조(對照)보오드보다 큰 값을 보였으나 작은 파아티클로 제조(製造)한 보오드에서는 뚜렷한 경향이 없었다. 큰 파아티클로 제조(製造)한 1층(層) 철선구성(鐵線構成)보오드의 박리저항(剝離抵抗) 및 나사못보지력(保持力)은 전체적으로 비슷한 수준(水準)을 보였고 작은 파아티클로 제조한 보오드에서는 개구면적(開口面積)이 증가(增加)함에 따라 박리저항(剝離抵抗)은 증가(增加)하고 나사못보지력(保持力)은 감소(減少)하는 현상(現象)을 보였다.

  • PDF

PVP(polyvinylpyrrolidone)가 리버스 오프셋용 은 나노 잉크 물성에 미치는 영향 (Effect of PVP(polyvinylpyrrolidone) on the Ag Nano Ink Property for Reverse Offset Printing)

  • 한현숙;곽선우;김봉민;이택민;김상호;김인영
    • 한국재료학회지
    • /
    • 제22권9호
    • /
    • pp.476-481
    • /
    • 2012
  • Among the various roll-to-roll printing technologies such as gravure, gravure-offset, and reverse offset printing, reverse offset printing has the advantage of fine patterning, with less than 5 ${\mu}m$ line width. However, it involves complex processes, consisting of 1) the coating process, 2) the off process, 3) the patterning process, and 4) the set process of the ink. Each process demands various ink properties, including viscosity, surface tension, stickiness, and adhesion with substrate or clich$\acute{e}$; these properties are critical factors for the printing quality of fine patterning. In this study, Ag nano ink was developed for reverse offset printing and the effect of polyvinylpyrrolidone(PVP), used as a capping agent of Ag nano particles, on the printing quality was investigated. Ag nano particles with a diameter of ~60 nm were synthesized using the conventional polyol synthesis process. Ethanol and ethylene glycol monopropyl ether(EGPE) were used together as the main solvent in order to control the drying and absorption of the solvents during the printing process. The rheological behavior, especially ink adhesion and stickiness, was controlled with washing processes that have an effect on the offset process and that played a critical role in the fine patterning. The electrical and thermal behaviors were analyzed according to the content of PVP in the Ag ink. Finally, an Ag mesh pattern with a line width of 10 ${\mu}m$ was printed using reverse offset printing; this printing showed an electrical resistivity of 36 ${\mu}{\Omega}{\cdot}cm$ after sintering at $200^{\circ}C$.

남산 화강암의 풍화 및 광물-물 반응에 관한 연구 (Mineralogical Study of the Granite Weathering in the Seoul Area: Water-Rock Interaction in the Namsan Granite)

  • 이수재;김수진
    • 한국광물학회지
    • /
    • 제7권1호
    • /
    • pp.40-48
    • /
    • 1994
  • 남산 화강암의 풍화를 물과 광물작용의 흡착작용의 관점에서 연구하였다. 순수한 증류수만으로도 광물-물의 흡착반응이 일어나며, 그 반응속도는 암석/물의 비율에 따라 수초-수 시간이내로 매우 빠르다. 광물과 물이 반응할 때 가장 영향을 미치는 것은 광물의 표면의 결합상태와 물의 수산이온농도이며, 암석/물의 비율은 용액의 수산이온농도를 좌우한다. 광물 입자의 크기는 반응속도에 큰 영향을 미치지만 암석/물의 비율이 약 7g/200 ml 이상이 되면 큰 변화를 보이지 않는다. 풍화를 받지 않은 화강암은 양의 pH edge (최대 pH 10)를 보이며 pH 7.1~7.5으로 하강하는 양상을 보인다. 그러나, 풍화를 받아서 점토 광물이 섞이 화강암은 음의 pH edge (최소 pH 4.8)를 보이며 pH 6을 넘지 않는다. 흡착반응 동안에 겔이 수면 위에 생성된 후 이것은 후에 깁사이트로 변하고, 암석/물의 비율이 높을수록 그리고 pH 변화가 클수록 많이, 그리고 빨리 형성된다.

  • PDF

사이클론 전처리부를 지닌 터널집진차량의 집진효율 최적화 (Dust collection optimization of tunnel cleaning vehicle with cyclone-based prefilter)

  • 정우태
    • 한국산학기술학회논문지
    • /
    • 제19권3호
    • /
    • pp.679-686
    • /
    • 2018
  • 지하철 터널 내에 축적된 미세먼지와 초미세먼지를 제거하기 위해서는 새로운 형식의 분진흡입차량이 필요하다. 따라서 최근 개발된 분진흡입차는 초미세먼지 제거를 위한 흡입시스템과 사이클론형식의 전처리부 및 전기집진기를 장착하고 있다. 본 논문에서는 집진차량의 하부에 설치된 먼지 흡입시스템이 다양한 크기의 먼지입자를 효과적으로 흡입하고 처리하기 위해 사이클론형식의 전처리부가 포함된 집진시스템을 설계하고 집진효율을 ANSYS FLUENT의 전산유체해석을 통해 확인하였다. 흡입구와 사이클론형 프리필터가 연결된 격자모델을 기반으로 공기유동과 상차분모델(Discrete Phase Model)을 이용하여 다양한 입자의 크기와 종류 및 흡입팬의 용량에 따른 입자의 거동을 해석하였다. 다양한 입자의 크기와 종류, 흡입팬의 용량에 대해서 해석결과 집진차량의 운영속도 5km/h에서 미세먼지처리를 위해서는 흡입팬의 용량 $1500m^3/min$에서 흡입구가 궤도면으로부터 약 100mm이내일 때 $100{\mu}m$ 이하 크기의 먼지를 모두 처리할 수 있음을 확인하였다. 이러한 흡입구와 사이클론형식의 프리필터를 탑재한 터널집진차량은 후단에 설치된 전기집진기의 부하를 줄이고, 지하 터널내의 미세먼지와 초미세먼지의 제거에 효과적으로 활용될 수 있을 것으로 기대된다.

Site Characteristics and Carbon Dynamics of the Gwangneung Deciduous Natural Forest in Korea

  • Lim, Jong-Hwan;Shin, Joon-Hwan;Kim, Choonsig;Oh, Jeong-Soo
    • 한국제4기학회지
    • /
    • 제17권2호
    • /
    • pp.163-163
    • /
    • 2003
  • The study area, Kwangneung Experiment Forest (KEF) is located on the west-central portion of Korean peninsula and belongs to a cool-temperate broadleaved forest zone. At the old-growth deciduous forest near Soribong-peak (533.1m) in KEF, we have established a permanent plot and a flux tower, and the site was registered as a KLTER site and also a KoFlux site. In this study, we aimed to present basic ecological characteristics and synthetic data of carbon budgets and flows, and some monitoring data which are essential for providing important parameters and validation data for the forest dynamics models or biogeochemical dynamics models to predict or interpolate spatially the changes in forest ecosystem structure and function. We made a stemmap of trees in 1 ha plot and analyzed forest stand structure and physical and chemical soil characteristics, and estimated carbon budgets by forest components (tree biomass, soils, litter and so on). Dominant tree species were Quercus serrata and Carpinus laxiflora, and accompanied by Q. aliena, Carpinus cordata, and so on. As a result of a field survey of the plot, density of the trees larger than 2cm in DBH was 1,473 trees per ha, total biomass 261.2 tons/ha, and basal area 28.0 m2/ha. Parent rock type is granite gneiss. Soil type is brown forest soil (alfisols in USDA system), and the depth is from 38 to 66cm. Soil texture is loam or sandy loam, and its pH was from 4.2 to 5.0 in the surface layer, and from 4.8 to 5.2 in the subsurface layer. Seasonal changes in LAI were measured by hemispherical photography at the l.2m height, and the maximum was 3.65. And the spatial distributions of volumetric soil moisture contents and LAIs of the plot were measured. Litterfall was collected in circular littertraps (collecting area: 0.25m2) and mass loss rates and nutrient release patterns in decomposing litter were estimated using the litterbag technique employing 30cm30cm nylon bags with l.5mm mesh size. Total annual litterfall was 5,627 kg/ha/year and leaf litter accounted for 61% of the litterfall. The leaf litter quantity was highest in Quercus serrata, followed by Carpinus laxiflora and C. cordata, etc. Mass loss from decomposing leaf litter was more rapid in C. laxiflora and C. cordata than in Q. serrata litter. About 77% of C. laxiflora and 84% of C. cordata litter disappeared, while about 48% in Q. serrata litter lost over two years. The carbon pool in living tree biomass including below ground biomass was 136 tons C/ha, and 5.6 tons C/ha is stored in the litter layer, and about 92.0 tons C/ha in the soil to the 30cm in depth. Totally more than about 233.6 tons C/ha was stored in DK site. And then we have drawn a schematic diagram of carbon budgets and flows in each compartment of the KEF site.

  • PDF