• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.11a
• /
• pp.236-237
• /
• 2021

In the waterproofing of the rooftop of reinforced concrete buildings, it is difficult to solve perfectly according to the proficiency of waterproofing materials, methods, and mechanics. Therefore, this study applies a Tricot Fabric Mesh to the behavior of the bottom concrete. In addition, it responds to the behavior of the concrete cracking, and the waterproofing and protective layer has developed a method to provide convenience for rooftop floor use by adhesion between the base and the waterproof layer with the use of high viscosity urethane to effectively move the surface deformation and surface vapor and install a airvent device on the wall.

• Fashion & Textile Research Journal
• /
• v.17 no.5
• /
• pp.800-814
• /
• 2015

This study develops baseball uniforms for amateur baseball players with excellent appearance and functional movement. This study selected a conventional baseball uniform and developed a new one for amateur baseball players with improved function and appearance based on previous research results. In case of developed baseball uniform materials, this study used polyurethane mixed fabric for the top to improve flexibility. A mesh material was used at the armpit, back, and bottom of the top, side line of pants and pockets to improve breathability. In addition, quilted material was added to the knee to improve durability and protection. For the patterns and design, this study used a gusset under the arm to assist in comfortable movement as well as reduced the length of the top and circumference of the hem to decrease unnecessary parts. For the pants, this study used a waistband gripper to avoid the top riding up, added darts behind the knees to bend comfortably, and added additional fabric inside the hem to prevent dirt. In addition, we reduced the width and length of the pants. Wearing evaluation was divided into appearance evaluation by experts and on-site-wearing test by baseball players. The wearing evaluation results for the developed baseball uniform indicated higher evaluations than a conventional baseball uniform in all sections as well as showed significant differences in all sections. The result of movement adaptability evaluation showed the highest satisfaction for 'the top does not ride up' and 'dirt do not get in'.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.20 no.2
• /
• pp.31-46
• /
• 2018

This study was carried out to offer basic data that can be used for outdoor wear production for active senior males, emerging as a new consumer bracket in the era of rapid aging. To this end, this study modified and complemented the patterns of outdoor jackets for active senior males based on existing outdoor jackets that received the most excellent evaluation. On the basis of the research outdoor wear wearing assessment results, this study confirmed those areas to be modified and proposed areas to be considered in manufacturing outdoor wear for this demographic. As a result of existing outdoor wear's wearing assessment, the jacket of brand B was shown to be the most excellent one. This study actually designed research outdoor wear patterns by modifying the problematic parts through the addition and subtraction of spare length or circumference in the sections where fit satisfaction was low by referring to the selected brands' patterns. The research outdoor wear was designed by referring to the preferred outdoor types and colors that were highlighted in the previous survey result of consumer wearing reality, based on the designs of the outdoor wear receiving the most excellent assessment in wearing assessment. Fabric that specially glued two-layered mesh that bonded the thin membrane of synthetic resin with polyester fabric was used as the material in this study. Wearing assessment was conducted by comparing the manufactured research outdoor wear and the existing outdoor wear selected as excellently assessed outdoor wear. Consequently, this study verified that the wearing fit of the research outdoor wear was more excellent in most items. This study proposed final patterns for outdoor jackets suitable for active senior males through the modification of several items that required improvements as per the wearing assessment of the research outdoor wear.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.27 no.4
• /
• pp.191-195
• /
• 2017

The microstructures of nonwoven fabric with and without nanofibers used as a filter for air purification type mask were investigated using scanning electron microscope. Moreover, we proposed a new mask design which is effective in the improvement of the fine dust blocking property. When comparing to nonwoven fabrics of which an average diameter was $25{\mu}m$, the nanofibers formed by the electrospinning process had a tight mesh structure arranged irregularly with a relatively large specific surface area, which could be associated with their much smaller diameter ranging from 25 to 120 nm. Such a prominent structural feature at nanofibers led to mechanical adsorption of fine particles, resulting in enhancement of filtering behavior maintaining high permeability. In addition to the excellent performance of the mask filter, wearing the mask properly is expected to maximize the blocking property of fine dust. To meet such a requirement, a new mask design that can be closely attached to the face in order to effectively block fine dust entering the gap between the face and the mask.

• Journal of Fashion Business
• /
• v.19 no.5
• /
• pp.1-16
• /
• 2015

The appearances and geometry structures of knitted fabrics have important effects on their functions as textile fabrics. Structural design of the woven fabric, prior to the manufacturing processes in the weaving mill, often leads to a similar predictable appearance in the final outcome with the corresponding weave design. The increase of the employment of elastic textile yarns in knitting fabrics for comfort stretch or outdoor sports wear knit products has, however, resulted in difficulties in predicting the final appearance of the knit structure design. Due to the stretchability and exceptional recovery behavior of the elastic yarns such as polyurethane elastomeric yarns, the appearance of the final product often differs from the initial knit design. At textile CAD program for preparing tricot knit designs has been employed in this study to predict the two dimensional appearance of the design. The similarities between the designs and corresponding knit products seem to be acceptable for the two-dimensional textile CAD program in this study. However, when elastomeric yarns are partially employed in the polyester filament tricot product, a considerable amount of departure from the design is apparent due to the constriction and/or deformation of property differences in the elastomeric yarns and polyester filament yarns. Therefore, another purpose of this study is to measure the departure of the final tricot product from the initial tricot design, especially in the case employing elastomeric yarns in the knit structure together with regular polyester filament yarns. For measuring the three-dimensional departure, a 3D scanning system has been used for the mesh reconstruction of the fabric specimen. Hopefully, the result from this study will be used as a guide to modify and improve the current textile CAD program proposed for the two-dimensional simulation of the tricot.

• Journal of the Korea Computer Graphics Society
• /
• v.29 no.3
• /
• pp.117-125
• /
• 2023

In the development of clothing design through virtual simulation, it is essential to minimize the differences between the virtual and the real world as much as possible. The most critical task to enhance the similarity between virtual and real garments is to find simulation parameters that can closely emulate the physical properties of the actual fabric in use. The simulation parameter optimization process requires manual tuning by experts, demanding high expertise and a significant amount of time. Especially, considerable time is consumed in repeatedly running simulations to check the results of applying the tuned simulation parameters. Recently, to tackle this issue, artificial neural network learning models have been proposed that swiftly estimate the results of drape test simulations, which are predominantly used for parameter tuning. In these earlier studies, relatively simple linear stiffness models were used, and instead of estimating the entirety of the drape mesh, they estimated only a portion of the mesh and interpolated the rest. However, there is still a scarcity of research on non-linear stiffness models, which are commonly used in actual garment design. In this paper, we propose a learning model for estimating the results of drape simulations for non-linear stiffness models. Our learning model estimates the full high-resolution mesh model of drape. To validate the performance of the proposed method, experiments were conducted using three different drape test methods, demonstrating high accuracy in estimation.

• Journal of the Korean Society of Costume
• /
• v.65 no.3
• /
• pp.151-166
• /
• 2015

This research aims to study the needs of the trail runners as trail running has become a popular outdoor activity, and give suggestions for high functional outdoor menswear design that can satisfy the needs of the highly demanding taste of runners. The design development is as follows: 1) The design had to be made of lightweight material and be easily packable in all situations, and 2) we also considered the ergonomic and compact fit for activity, 3) the functional location of high functional fabric, 4) the reflective use and layering system giving a wide range of outdoor workout time and 5) the trend in 2016 S/S active sports and outdoor wear. Based on the above elements, the men's outdoor wear design has been developed for trail running in spring and summer. The design development includes a total of 7 items. The design focused on lightweight, availability of packaging, "comfortability" and freshness in activity, functional suitability of location of highly functional materials and the layering system to protect body temperature under the changing environment. In particular, the layering system was implemented to provide ventilation, and it was done in body parts that released the most body heat. Therefore, mesh materials were actively used on the side panel, sleeves and center of the back piece for necessary sweat emission without any problems and ventilation for trail running.

• Fashion & Textile Research Journal
• /
• v.11 no.1
• /
• pp.121-129
• /
• 2009

Nowadays, global interest is being placed on research and development of smart clothing which is expected to create a high added-value industry in the future. The purpose of this research is to develop smart pants with vibrating massage functions that have excellent outer appearances and provide comfort to wearers and assess outer appearance, comfort, and massaging effects of smart pants. As the results of this research, smart pants where vibrating devices which are mainly composed of vibrating motor, controller, and switch are attached were completed. Vibrating motors were fixed on a thin and light non-woven fabric material, covered with a mesh material, and attached by snaps to the experiment pants. Switch was attached to the inside of a pocket, and batteries were positioned inside of pockets. Ten subjects marked their satisfaction of wearing smart pants on a 5-point scale. Noticeable changes in outer appearance when vibrating motors operate turned out to be low. Wearer's comfort in back waist and front thigh parts where vibrating motors were attached turned out to be high-satisfied. Massaging effects of smart pants turned out to be high. Attaching and detaching vibrating devices turned out to be convenient. Lining materials used for smart paints were effective in blocking electromagnetic waves generated from vibrating devices.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.45 no.4
• /
• pp.598-611
• /
• 2021

The purpose of this study was to investigate the necessary functions and areas of improvement in bras worn by patients during the initial three-month recovery period after a breast augmentation procedure, and a functional bra that fits properly was designed. In order to analyze the necessary functions, a bra was designed after relevant discussions with medical staff and patients who underwent breast augmentation surgeries and considering the advice from bra designers and clothing and textile experts. This bra was designed to protect the surgical scars and minimize the compression by inserting a nonwoven fabric into the shoulder and front parts. In addition, it was designed in a way that could fit the individual breast volume by using a mesh material partially on the upper side of the molded cups. Underwires that could support the breasts were inserted, and a detachable wire was used to suit the patient's needs and the diagnosis by the medical staff. As the bra designed in this study received excellent scores during the evaluation by research subjects and experts, it can be used for designing the prototype of a functional bra.

• Fashion & Textile Research Journal
• /
• v.21 no.1
• /
• pp.75-87
• /
• 2019

The purpose of the study was to suggest a cycle wear top jersey improved in mobility. The study developed a new cycle wear with improvement in dissatisfaction factors by planning design, pattern and the functionality of fabric. Considering the amount of sweat and the necessities of compression part, the basic material, the additional compression material, and the mesh material were arranged differently according to areas. The assessment of the developed cycle wear was composed of wearing comfort evaluation by female cyclist, photo analysis and garment pressure evaluation. The developed cycle wear was evaluated and compared with the current cycle wear. As a result of wearing comfort evaluation, the developed cycle wear was evaluated as better than the existing ones in all part, particularly in the areas of reflection tape and materials, partial pressure, pocket size, and prevention of loss. Photo analysis was in agreement with the appearance evaluation of the participants. As a result of garment pressure evaluation, the front neck part was more comfortable and the upper arm, abdomen, and waist area showed higher pressure, so it partially supported the body. This study has significant meaning for developing a new cycle wear top, protecting the body and improving the exercise effect.