• Journal of the Korean Ceramic Society
• /
• v.42 no.2 s.273
• /
• pp.104-109
• /
• 2005

To study the role of PbO as the buffer layer, Pt/PZT/PbO/Si with the MFIS structure was deposited on the p-type (100) Si substrate by the r.f. magnetron sputtering with $Pb_{1.1}Zr_{0.53}Ti_{0.47}O_3$ and PbO targets. When PbO buffer layer was inserted between the PZT thin film and the Si substrate, the crystallization of the PZT thin films was considerably improved and the processing temperature was lowered. From the result of an X-ray Photoelectron Spectroscopy (XPS) depth profile result, we could confirm that the substrate temperature for the layer of PbO affects the chemical states of the interface between the PbO buffer layer and the Si substrate, which results in the inter-diffusion of Pb. The MFIS with the PbO buffer layer show the improved electric properties including the high memory window and low leakage current density. In particular, the maximum value of the memory window is 2.0V under the applied voltage of 9V for the Pt/PZT(200 nm, $400^{\circ}C)/PbO(80 nm)/Si$ structures with the PbO buffer layer deposited at the substrate temperature of $300^{\circ}C$.

• Korean Journal of Materials Research
• /
• v.11 no.4
• /
• pp.290-293
• /
• 2001

The SrBi$_2$Nb$_2$O$_{9}$ (SBN) thin films were deposited on p-type(100) Si substrates by rf magnetron sputtering to confirm the Possibility of Pt/SBN/Si structure for the application of nondestructive read out ferroelectric random access memory (NDRO- FRAM). The SBN thin films were deposited by co-sputtering method with Sr$_2$Nb$_2$O$_{7}$ (SNO) and Bi$_2$O$_3$ ceramic targets. The SBN thin films deposited at room temperature were annealed at $700^{\circ}C$ for 1hr in $O_2$ ambient. The structural and electrical properties of SBN with different power ratios of targets were measured by x-ray diffraction(XRD), scanning electron microscopy(SEM), capacitance-voltage(C-V), and current-voltage(I-V). The C-V curves of the SBN films showed hysteresis curves of a clockwise rotation showing ferroelectricity. When the Power ratio of the SNO/Bi$_2$O$_3$ targets was 120 W/100 W, the SBN thin films had excellent electrical properties. The memory window of SBN thin film was 1.8 V-6.3 V at applied voltage of 3 V-9 V and the leakage current density was 1.5 $\times$ 10$^{-7}$ A/$\textrm{cm}^2$ at applied voltage of 5 V The composition of SBN thin films was analysed by electron probe X-ray micro analyzer(EPMA) and the atomic ratio of Sr:Bi:Nb with pawer ratio of 120 W/100 W was 1:3:2.

• Spatial Information Research
• /
• v.23 no.2
• /
• pp.1-9
• /
• 2015

Graphical processing unit (GPU) contains many arithmetic logic units (ALUs). Because many ALUs can be exploited to process parallel processing, GPU provides efficient data processing. The spatial data require many geographic coordinates to represent the shape of them in a map. The coordinates are usually stored as geodetic longitude and latitude. To display a map in 2-dimensional Cartesian coordinate system, the geodetic longitude and latitude should be converted to the Universal Transverse Mercator (UTM) coordinate system. The conversion to the other coordinate system and the rendering process to represent the converted coordinates to screen use complex floating-point computations. In this paper, we propose a parallel processing technique that processes the conversion and the rendering using the GPU to improve the performance. Large spatial data is stored in the disk on files. To process the large amount of spatial data efficiently, we propose a technique that merges the spatial data files to a large file and access the file with the method of memory mapped file. We implement the proposed technique and perform the experiment with the 747,302,971 points of the TIGER/Line spatial data. The result of the experiment is that the conversion time for the coordinate systems with the GPU is 30.16 times faster than the CPU only method and the rendering time is 80.40 times faster than the CPU.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.7
• /
• pp.1227-1234
• /
• 2008

In this paper is designed a 256-bit synchronous OTP(one-time programmable) memory required in application fields such as automobile appliance power ICs, display ICs, and CMOS image sensors. A 256-bit synchronous memory cell consists of NMOS capacitor as antifuse and access transistor without a high-voltage blocking transistor. A gate bias voltage circuit for the additional blocking transistor is removed since logic supply voltage VDD(=1.5V) and external program voltage VPPE(=5.5V) are used instead of conventional three supply voltages. And loading current of cell to be programmed increases according to RON(on resistance) of the antifuse and process variation in case of the voltage driving without current constraint in programming. Therefore, there is a problem that program voltage can be increased relatively due to resistive voltage drop on supply voltage VPP. And so loading current can be made to flow constantly by using the current driving method instead of the voltage driving counterpart in programming. Therefore, program voltage VPP can be lowered from 5.9V to 5.5V when measurement is done on the manufactured wafer. And the sens amplifier circuit is simplified by using the sens amplifier of clocked inverter type instead of the conventional current sent amplifier. The synchronous OTP of 256 bits is designed with Magnachip $0.13{\mu}m$ CMOS process. The layout area if $298.4{\times}314{\mu}m2$.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.10
• /
• pp.1845-1852
• /
• 2008

The key elements of inter prediction are motion estimation(ME) and motion compensation(MC). Motion estimation is to find the optimum motion vectors, not only by using a distance criteria like the SAD, but also by taking into account the resulting number of 비트s in the 비트 stream. Motion compensation is compensate for movement of blocks of current frame. Inter-prediction Encoding is always the main bottleneck in high-quality streaming applications. Therefore, in real-time streaming applications, dedicated hardware for executing Inter-prediction is required. In this paper, we studied a motion estimator(ME) for H.264/AVC. The designed motion estimator is based on 2-D systolic array and it connects processing elements for fast SAD(Sum of Absolute Difference) calculation in parallel. By providing different path for the upper and lower lesion of each reference data and adjusting the input sequence, consecutive calculation for motion estimation is executed without pipeline stall. With data reuse technique, it reduces memory access, and there is no extra delay for finding optimal partitions and motion vectors. The motion estimator supports variable-block size and takes 328 cycles for macro-block calculation. The proposed architecture is local memory-free different from paper [6] using local memory. This motion estimation encoder can be applicable to real-time video processing.

• Journal of IKEEE
• /
• v.23 no.1
• /
• pp.80-90
• /
• 2019

Even though Non-Volatile Memory (NVM) is used for data storage, a page table should be built to access data in it. And this observation leads us to the Persistent Page Table (PPT) scheme that keeps the page table in NVM persistently. By the way, processors have different page table structures and really operational page table cannot be built without virtual and physical addresses of NVM. However, those addresses are determined dynamically when NVM storage is attached to the system. Thus, the PPT should have system-independent and also address-independent structure and really working system-dependent page table should be built from the PPT. Moreover, entries of PPT should be updated atomically and, in this paper, we describe the design of PPT that meets those requirements. And we investigate how file systems can decrease the journaling overhead with the swap operation, which is a new operation created by the PPT. We modified the Ext4 file system in Linux and experiments conducted with Filebench workloads show that the swap operation enhances file system performance up to 60%.

• Journal of the Korean Society for information Management
• /
• v.39 no.4
• /
• pp.159-189
• /
• 2022

The research aims to recommend strategies to promote PR activities of 'the Memory of the World(MoW)' on the websites. To achieve the goal, the researchers analyzed the current conditions of online PRs of the MoW in S. Korea by developing the standards/elements for analysis. The research examined the two main concepts of MoW and extracted the three core standards/elements for evaluating current online PRs of MoW through reviewing earlier studies: contents of PRs, ways of PRs, and features of media. The research examined PR activities on the 21 websites of 11 institutions which manage MoW in South Korea. The research found the significant features of the online PRs and suggested detailed strategies for improving the online PRs of MoW: first, it is required to emphasize the values of both preservation and utilization of MoW equally. Second, it is necessary to promote the PRs of MoW by using the way of 'user segmentation'. Third, it needs to develop the unit systems and/or services to integrate with related documentary heritages so that users can access documentary heritages effectively and efficiently. Finally, it is required to develop the guidelines or/and manuals to conduct and promote the PRs of the MoW by providing specific directions and methods of publicities.

• Geophysics and Geophysical Exploration
• /
• v.14 no.1
• /
• pp.98-104
• /
• 2011

Numerical simulation in exploration geophysics provides important insights into subsurface wave propagation phenomena. Although elastic wave simulations take longer to compute than acoustic simulations, an elastic simulator can construct more realistic wavefields including shear components. Therefore, it is suitable for exploration of the responses of elastic bodies. To overcome the long duration of the calculations, we use a Graphic Processing Unit (GPU) to accelerate the elastic wave simulation. Because a GPU has many processors and a wide memory bandwidth, we can use it in a parallelised computing architecture. The GPU board used in this study is an NVIDIA Tesla C1060, which has 240 processors and a 102 GB/s memory bandwidth. Despite the availability of a parallel computing architecture (CUDA), developed by NVIDIA, we must optimise the usage of the different types of memory on the GPU device, and the sequence of calculations, to obtain a significant speedup of the computation. In this study, we simulate two- (2D) and threedimensional (3D) elastic wave propagation using the Finite-Difference Time-Domain (FDTD) method on GPUs. In the wave propagation simulation, we adopt the staggered-grid method, which is one of the conventional FD schemes, since this method can achieve sufficient accuracy for use in numerical modelling in geophysics. Our simulator optimises the usage of memory on the GPU device to reduce data access times, and uses faster memory as much as possible. This is a key factor in GPU computing. By using one GPU device and optimising its memory usage, we improved the computation time by more than 14 times in the 2D simulation, and over six times in the 3D simulation, compared with one CPU. Furthermore, by using three GPUs, we succeeded in accelerating the 3D simulation 10 times.

• Journal of Information Technology Services
• /
• v.12 no.4
• /
• pp.369-380
• /
• 2013

The advent of the state-of-the-art technologies such as cloud computing and big data processing stimulates the provision of various new IT services, which implies that more servers are required to support them. However, the need for more servers will lead to more energy consumption and the efficient use of energy in the computing environment will become more important. The next generation nonvolatile RAM has many desirable features such as byte addressability, low access latency, high density and low energy consumption. There are many approaches to adopt them especially in the area of the file system involving storage devices, but their focus lies on the improvement of system performance, not on energy reduction. This paper suggests a novel approach for energy reduction in which the MRAM-based SSD is utilized as a storage device instead of the hard disk and a downsized page is adopted instead of the 4KB page that is the size of a page in the ordinary file system. The simulation results show that energy efficiency of a new approach is very effective in case of accessing the small number of bytes and is improved up to 128 times better than that of NAND Flash memory.

• Proceedings of the IEEK Conference
• /
• 2004.06b
• /
• pp.419-422
• /
• 2004

A sensing scheme for current-mode magneto-resistance random access memory (MRAM) with a 1T1MTJ cell structure is proposed. Magnetic tunnel junction (MTJ) resistance, which is HIGH or LOW, is converted to different cell currents during READ operation. The cell current is then amplified to be evaluated by the reference cell current. In this scheme, conventional bit line sense amplifiers are not required and the operation is less sensitive to voltage noise than that of voltage-mode circuit is. It has been confirmed with HSPICE simulations using a 0.35-${\mu}m$ 2-poly 4-metal CMOS technology.