• 한국지반신소재학회논문집
• /
• 제4권3호
• /
• pp.11-19
• /
• 2005

2가지 형태의 지오그리드의 장기안정성을 평가하였다. 멤브레인 연신형 지오그리드는 지수함수 형 인장특성을 나타내었으며 섬유형 지오그리드는 파단점에 근접할수록 빠른 인장특성의 증가를 나타내었다. 단기 가속 크리프 시험은 섬유형 지오그리드에는 실시되었지만 멤브레인 연신형 지오그리드의 경우 열적특성 때문에 실온에서만 실시 하였다. 멤브레인 연신형 지오그리드의 크리프 변형률은 인장시험에 의한 극한 인장변형률보다 크게 나타났다. 섬유형 지오그리드의 크리프 변형에 의한 감소인자는 멤브레인 연신형 지오그리드보다 작게 나타났다. 이 결과로부터 섬유형 지오그리드가 멤브레인 연신형 지오그리드보다 크리프 변형에 안정성이 있음을 알 수 있었다.

• 한국가스학회지
• /
• 제13권6호
• /
• pp.9-14
• /
• 2009

본 연구에서는 LNG 저장탱크의 단열재 공간에 설치된 코너프로텍션에 작용하는 응력 및 변형거동 특성을 FEM으로 해석하였다. 제시된 코너프로텍션은 기존의 멤브레인식 LNG 저장탱크의 강도안 전성과 LNG 누출안전성을 증대시킬 수 있다. LNG 저장탱크 시스템에 작용하는 응력과 변위 거동량을 단열재 상자, 멤브레인 내부탱크, PC 외부탱크에 대하여 해석하였다. 유한요소법으로 계산한 해석결과에 의하면, 내부탱크와 외부탱크 사이에 코너프로텍션을 설치한 새로운 LNG 멤브레인 저장탱크의 응력과 변형 거동량은 기존의 LNG 저장탱크에 비하여 현저하게 줄어드는 경향을 보여주고 있다. 이러한 현상은 LNG 저장탱크 시스템의 강도 안전성이 코너프로텍션을 설치함에 따라서 강성도가 증가하기 때문인 것으로 설명될 수 있다.

• 한국지반신소재학회논문집
• /
• 제3권2호
• /
• pp.31-38
• /
• 2004

2종류 지오그리드의 장기안정성의 검토되었다. 멤브레인 연신형 지오그리드는 지수함수형 인장거동을, 섬유형 지오그리드는 파단점에 가까울수록 빠른 인장특성 증가를 나타내었다. 섬유형 지오그리드의 경우 가속 크리프 시험을 실시하였지만 멤브레인 연신형 지오그리드의 경우에는 열적특성 때문에 가속 크리프 시험을 실시할 수 없었다. 멤브레인 연신형 지오그리드의 크리프 변형률은 인장시험에 의한 극한변형률보다 훨씬 큰 값을 나타내었으며, 섬유형 지오그리드의 크리프 변형에 의한 감소인자는 멤브레인 연신형 지오그리드에 비해 작은 값을 나타내었다.

• Korean Membrane Journal
• /
• 제10권1호
• /
• pp.39-45
• /
• 2008

Polyelectrolyte complex based on two anionic polysaccharides, composed of sodium alginate and carrageenan, were prepared by interacting with divalent calcium ions in solution. The effects of annealing on the structural deformation of polyelectrolyte complex and on their characteristics at removing water from a methanol mixture from the point of molecular sieve were investigated and discussed. The result showed that the structural deformation of the annealed polyelectrolyte complex has an effect on the free volume between these polymer chains and the chelate segments such a shrinking of the overall morphology, which act as a molecular sieve in the separation of methanol and water mixtures.

• Geomechanics and Engineering
• /
• 제2권4호
• /
• pp.281-302
• /
• 2010

An extended model for the response of a rigid footing on a reinforced foundation bed on super soft soil is proposed by incorporating the rough membrane element into the granular bed. The super soft soil, the granular bed and the reinforcement are modeled as non-linear Winkler springs, non-linear Pasternak layer and rough membrane respectively. The hyperbolic stress-displacement response of the super soft soil and the hyperbolic shear stress-shear strain response of the granular fill are considered. The finite deformation theory is used since large settlements are expected to develop due to deformation of the super-soft soil. Parametric studies quantify the effect of each parameter on the stress-settlement response of the reinforced foundation bed, the settlement and tension profiles.

• 한국가스학회:학술대회논문집
• /
• 한국가스학회 2005년도 추계학술발표회 논문집
• /
• pp.193-198
• /
• 2005

An investigation was made on the fatigue characteristics of type 304 stainless steel membrane manufactured by plastic working. To investigate the effect of plastic deformation, tests were performed with 5 types of specimens having different amount of plastic deformation. Fatigue tests were executed under both room and LNG temperatures ($-162^{\circ}C$). All the test results were compared with the fatigue data provided by RPIS(Recommended Practice for Inground LNG Storage Tank). On the basis of these results, it was confirmed that RPIS's design fatigue curve could be applied to evaluate fatigue lift of KOGAS membrane manufactured by pressing.

• Structural Engineering and Mechanics
• /
• 제45권5호
• /
• pp.631-641
• /
• 2013

In this paper, the problem of axisymmetric deformation of the circular membrane fixed at its perimeter under the action of uniformly-distributed loads was resolved by exactly using power series method, and the solution of the problem was presented. An investigation into the so-called Hencky transformation was carried out, based on the solution presented here. The results obtained here indicate that the well-known Hencky solution is, without doubt, correct, but in the published papers the statement about its derivation is incorrect, and the so-called Hencky transformation is invalid and hence may not be extended to use as a general mathematical method.

• 소성∙가공
• /
• 제5권1호
• /
• pp.8-17
• /
• 1996

In the present study SEAM (Shear Energy Augmented Membrane) elements have been devel-oped. Maintaining the numerical efficiency of conventional membrane elements the effect of out-of-plane deformation (transverse shear deformation) has been incorporated for the purpose of computational stabilization without introducing additional degrees of freedom. Computations are carried out for the deep drawings of square cup to check the validity and the effectiveness of proposed SEAM elements. The computational results are compared with both the existing results. And the effects of process variables like initial sheet thickness punch & die round and clearance are checked

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1998년도 가을 학술발표회 논문집
• /
• pp.298-305
• /
• 1998

The purpose of this study is to propose the method of determining the initial fabric membrane structures surface and membrane patterning procedures. Tension structure, such as, fabric membrane structures and cable-net, is stabilized by their initial prestress and boundary condition. The process to find initial structural overall shape of tension structures produced by initial prestress called Shape Finding or Shape Analysis. One of the most important factor for the design of membrane structures is to search initial smooth surface, because unlike steel or concrete building elements which resist loads in bending, all tension structure forces are carried within the surface by membrane stress or cable tension. To obtain initial surface of fabric membrane element in large deformation analysis, the membrane element is idealized as cable using a technique with Force-density method. and that result is compared with well-known nonlinear numerical method, such as Newton-raphson method and Dynamic relaxation method. The shape resulting from Force-density method has been dealt with as the initial membrane shape and used patterning procedures.

• Structural Engineering and Mechanics
• /
• 제40권2호
• /
• pp.191-213
• /
• 2011

This paper presents an improved 8-node shell element for the analysis of plates and shells. The finite element, based on a refined first-order shear deformation theory, is further improved by the combined use of assumed natural strain method. We analyze the influence of the shell element with the different patterns of sampling points for interpolating different components of strains. Using the assumed natural strain method with proper interpolation functions, the present shell element generates neither membrane nor shear locking behavior even when full integration is used in the formulation. Further, a refined first-order shear deformation theory, which results in parabolic through-thickness distribution of the transverse shear strains from the formulation based on the third-order shear deformation theory, is proposed. This formulation eliminates the need for shear correction factors in the first-order theory. Numerical examples demonstrate that the present element perform better in comparison with other shell elements.