• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2001년도 학술대회 논문집
• /
• pp.25-28
• /
• 2001

Bi-2212 HTS tube was fabricated by centrifugal forming process(CFP). As a variation of melt casting process(MCP) or centrifugal casting technique, the centrifugal forming process is a flexible method for manufacturing Bi-2212 bulk tubes and has been optimized to achieve smooth surface and uniform thickness. At this process, the slurry was prepared in the mixing ratio of 10:1 between Bi-2212 powder and binder and initially charged into the rotating mold under the speed of 300~450 rpm Heat-treatment was performed at the temperature ranges of 860 ~ $890^{\circ}C$ in air for partial melting. The HTS tube fabricated by centrifugal forming process at $890^{\circ}C$ under the rotating speed of 450 rpm was highly densified and the plate-like grains with more than 20$\mu$m were well oriented along the rotating axis. The measured Tc and Jc at 10K were around 85K and 3,000A/cm2 respectively.

• 한국세라믹학회지
• /
• 제34권4호
• /
• pp.420-428
• /
• 1997

Alumino-borosilicate glasses containing nano-sized CuCl crystals for nonlinear optical application were prepared by the melting and precipitation process, and structural and optical properties were investigated by using XRD, TEM, SAXS, and optical spectroscopy. the average radius of the precipitated CuCl particles was about 2 nm. The blue shift of Z3 resonance peak with decreasing the precipitated CuCl particles size was found and the radius increased with decreasing the glass transition temperature of the matrix glass and with increasing the temperature and duration time of the precipitation heat treatment.

• Journal of Welding and Joining
• /
• 제27권1호
• /
• pp.59-64
• /
• 2009

In order to determine the One-Drop One-Pulse(ODOP) condition of the pulsed gas metal arc(GMA) welding, the drop detaching phenomenon during the peak time is investigated using the force-displacement model. The drop detaching criterion is established based on the displacement of the pendant drop, and the forces exerted on the drop are calculated using the Modified Force Balance Model(MFBM). The effects of wire melting on the drop size and force are included in the force-displacement model. While the peak current has most significant effects on the drop detaching time, the initial drop mass prior to the peak time also influences drop transfer. The calculated results show good agreements with the experimental data, which implies that the ODOP condition can be predicted using the force-displacement method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1688-1690
• /
• 1996

In this paper, by using the Finite Element Method, we analysed the melting and clearing characteristic of fuse elments shapes. The melting characteristics and the effects of temperature conduction by fuse element shames was studied. We compared the actul testing results by the clearing device with the simulation result.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2002년도 생물공학의 동향 (X)
• /
• pp.539-542
• /
• 2002

We propose new encoding method for numerical data in DNA using temperature gradient. To represent numerical values in DNA sequences, we introduce melting temperature. Since DNA strands representing smaller values have a lower Tm, they tend to denature with ease and also easily amplified by denaturation temperature gradient PCR. We also implement a local search molecular algorithm using temperature gradient, which is contrasted to conventional exhaustive search molecular algorithms. The proposed methods are verified by solving an instance of the travelling salesman problem. We could effectively amplify the correct solutions and the use of temperature gradient made the detection of solutions easier.

• Journal of Pharmaceutical Investigation
• /
• 제14권2호
• /
• pp.55-61
• /
• 1984

This investigation was designed to determine the release of fenbufen from suppositories and their bioavailability in rabbits. Suppositories containing fenbufen were made by the fusion method with Witepsol H-15, Wecobee and PEG 1540 base. Displacement value, weight variation, content uniformity, melting point and melting time were determined for preformulation of the fenbufen suppositories. The release rates were determined with the KP dissolution apparatus and with cellophane tube dialysis device and were increased in order of PEG 1540, Witespol H-15 and Wecobee. The bioavailabilities of fenbufen after rectal administration were also increased in order of PEG 1540, Witespol H-15 and Wecobee.

• 소성∙가공
• /
• 제20권8호
• /
• pp.575-580
• /
• 2011

Direct laser melting(DLM) is promising as a joining method for producing parts for automobiles, aerospace, marine and medical applications. An advantageous characteristic of DLM is that it affects the parent metal very little. The mechanical properties of parts made by DLM are strongly affected by the porosity and surface roughness of the laser melted beads. This is a systematic study of the effects of the porosity and surface roughness of laser melted beads using various processing parameters, such as laser power, scan rate and overlapping ratio of the fill spacing. The specimens were fabricated with 316L and 304L austenitic stainless steel powder. Dense parts with low porosity were obtained at low laser scan speed, as it increased the aspect ratio of the parental material and the depth of penetration. The variations of surface roughness were examined at various processing parameters such as overlapping ratio and laser power.

• 한국레이저가공학회지
• /
• 제7권1호
• /
• pp.37-47
• /
• 2004

Laser-assisted selective infiltration is a new method of building metal layers to make metal parts layer by layer, in which superheated microscopic metal droplets are infiltrated into a laser-preheated layer of microscopic metal powders. In this work, the selective infiltration of a low melting-point metal, Sn-37Pb wt%, was conducted to investigate the effects of such dominant parameters as superheating temperature, Nd:YAG laser power for preheating, substrate temperature, etc. The optimal conditions for successful selective infiltration of a single layer of microscopic metal powder were experimentally obtained

• Journal of Welding and Joining
• /
• 제19권4호
• /
• pp.379-383
• /
• 2001

Resistance spot welding has been widely used in the sheet metal joining processes because of low cost, high productivity and convenience. Recently, automobile and aerospace industries are trying to replace partly steel sheets with aluminum alloy sheets. But in the case of dissimilar materials, to apply resistance spot welding has been known to be very difficult owing to the effect of melting temperature. On this study, an effort was made to apply spot welding of dissimilar sheet metals, 2024 aluminum alloy and zinc coated steel sheet, evaluate the spot weld quality with tensile-shear strength test and nondestructive evaluation technique, C-scan image methodology. In this study results, as the current below 11 kA, melting of materials is not achieved well. Also as the current exceeds to 13.5 kA, the more spatters happen at welded zone and tensile-shear strength lowered. So, the feasibility of C-scan image technique proposed in the study is found to be suitable evaluation method for resistance spot weldability.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.214-217
• /
• 1996

In this paper. we deal wish the I-t characteristic of law voltage distribution fuse. It is used to be thermal characteristic in being produced at fuse element part. The elements are divided low temperature melting element(LTME) by high temperature melting element(HTME). Those parts make of coordination. The characteristic of fuse is decided by material and design etc. used at element. We analysis I-t characteristic curve by using the numerical method. And we compared the curve of simulation with that of experiment