• Fibers and Polymers
• /
• v.4 no.3
• /
• pp.124-128
• /
• 2003

Dark brown Alpaca fiber was reduced in shade via selective bleaching with peroxide. Two selective oxidative bleaching methods were tested on alpaca top to assess their effectiveness for color removal and fiber quality properties. Color change, bundle strength, weight loss, fiber diameter, surface modification, dye-ability and dye wash fastness were assessed for both methods and compared with the original brown top. Bleach method 1 (BL-I) showed little surface modification, 5.8% weight loss and 2.4% strength loss. D1925 yellowness index was reduced to 74.3 from 83.1 and provided a good base for the dyeing of medium to deep shades. Bleach method 2 (BL-II) displayed considerable surface modification, 7.8% weight loss and 18% strength loss. BL-II also resulted in a mean diameter reduction of 1.9 micron during bleaching. Yellowness was reduced to 64.5 from 83.1 and provided a very good base for the dyeing of medium to deep shades. BL-I showed better exhaustion of the premetallised dye Lanaset Violet B than BL-II. Wash fastness for BL-II was 1 grey scale unit poorer than BL-I. BL-II showed far better color clarity at pale depths however the wash fastness of the finished product was not good enough to maintain the depth or clarity of the color. BL-I showed poorer clarity of color but exhibited better wash fastness results.

• Mycobiology
• /
• v.40 no.3
• /
• pp.164-167
• /
• 2012

The effects of aeration through lid filters on the hyphal growth of Lentinula edodes (oak mushroom) in sawdust cultivation bags were investigated. The aeration treatment levels were traditional 27 mm hole cotton plugs, cotton balls and combinations of seven hole sizes ${\times}$ two hole positions (up and under) in the lids covering plastic bags containing 1.4 kg sawdust medium at 63% moisture that had been autoclaved for one hour and inoculated with sawdust spawn of L. edodes strain 921. Aeration treatment effects were measured based on the $CO_2$ concentration at the 15th wk, as well as the hyphal growth rate and degree of weight loss of bags every 14 days for 15 wk. In bags with traditional cotton plugs, the $CO_2$ concentration was $3.8{\pm}1.3%$, daily mean hyphal growth was $2.3{\pm}0.6mm$ and daily mean weight loss was $0.84{\pm}0.26g$. In the bags with 15 mm diameter holes, the $CO_2$ concentration was $6.0{\pm}1.6%$, daily hyphal growth was $2.8{\pm}0.2mm$ and daily weight loss was $0.86{\pm}0.4g$. The bags with 15 mm holes had a higher $CO_2$ concentration and lower water loss than bags with other hole sizes, but the hyphal growth was not significantly different from that of other bags. The weight loss of bags increased proportionally relative to the lid hole sizes. Taken together, these results indicate that traditional cotton plugs are economically efficient, but 15 mm hole lids are the most efficient at maintaining hyphal growth and controlling water loss while allowing $CO_2$ emissions.

• Journal of the Korean Wood Science and Technology
• /
• v.17 no.4
• /
• pp.77-82
• /
• 1989

In this study the oxygen index method was used to compare the duration of flaming and the rate of weight loss at the level of 6 and 9mm panel thicknesses among solid wood, plywood, particleboard, and medium density fiberboard. The obtained results were as follows: 1. In 9mm-thick panels, the combustibility was the largest in lauan solid wood followed by medium density fiberboard. particleboard. and plywood. 2. Medium density fiberboard was burned more easily than plywood in 6mm-thick panels and the higher oxygen concentration was needed as the panel thickness increased. 3. The oxygen indices of 9mm-thick panels were 29.0 in lauan solid wood, 31.4 in medium density fiberboard, 33.0 in particleboard, and 33.4 in plywood and those of 6mm-thick panels were 28.3 in medium density fiberboard and 29.7 in plywood. 4. The rate of weight loss was the largest in lauan solid wood followed by medium density fiberboard, plywood, and particleboard.

• Corrosion Science and Technology
• /
• v.21 no.3
• /
• pp.171-183
• /
• 2022

The performance and inhibitory action of the aqueous extract of Cyperus Conglomeratus's leaves against corrosion of XC70 steel in a 1M HCl acid medium are studied by the determination of the weight loss, the potentiodynamic polarization curves analysis, and electrochemical impedance measurements (electrochemical techniques). The corrosion inhibitory efficiency of XC70 steel increases with the increasing concentration of the green inhibitor, however, the corrosion rate of the steel decreases. Weight loss measurements show that the maximum percentage corrosion inhibition efficiency is approximately 61.86%, while the analysis of the mixed character polarization curves shows that the inhibitor could achieve an inhibition efficiency of 86.96%. The electrochemical impedance study confirmed that the value of the charge transfer resistance (R_ct) increases and the value of the double layer capacity (C_dl) decreases with increasing concentration of the aqueous extract of Cyperus Conglomeratus's leaves, thus increasing the inhibition efficiency. The study showed that this aqueous extract acts by adsorption on the metal surface; this adsorption follows the Langmuir isotherm. This research work showed that Cyperus Conglomeratus leaves extract acts as an effective and eco-friendly inhibitor on mild steel in an acid medium.

• Journal of the Korean Chemical Society
• /
• v.55 no.5
• /
• pp.835-841
• /
• 2011

Corrosion inhibition of mild steel by nevirapine, an antiretroviral has been investigated using potentiodynamic polarization, electrochemical impedance spectroscopy technique and weight loss methods. The experimental results suggested, nevirapine is a good corrosion inhibitor for mild steel in 1M hydrochloric acid medium and the inhibition efficiency increased with increase in inhibitor concentration. The kinetic parameters for corrosion process and thermodynamic parameters for adsorption process were calculated and discussed. The adsorption of the inhibitor on the surface of mild steel followed Langmuir adsorption isotherm.

• Journal of the Korean Chemical Society
• /
• v.57 no.6
• /
• pp.672-676
• /
• 2013

The corrosion inhibition nature of Ginger affinale extract for the corrosion of mild steel in 0.5N $H_2SO_4$ was investigated using weight loss, electrochemical impedance and potentiodynamic polarization methods. The results revealed that Ginger affinale extract acts as a good corrosion inhibitor in 0.5N $H_2SO_4$ medium. The inhibition efficiency increased with an increase in inhibitor concentration. The inhibition could be attributed to the adsorption of the inhibitor on the steel surface.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.28 no.3
• /
• pp.231-236
• /
• 2022

The research was aimed to improve pre-harvest methods to maintain marketability in postharvest leaf lettuce. In this study, the effect of hydroponics on the growth and post-harvest storage characteristics of 'Chongchima' lettuce grown in peat mass medium hydroponic system using a non-powered culture device or deep water culture (DWC) was evaluated. There was no difference in fresh weight, leaf number, SPAD, moisture content, and C/N ratio between peat moss growing medium hydroponic and DWC methods except plant height. It was found that lettuce cultivation by a nonpowered hydroponics method is easier than the existing DWC. The quality parameters, such as fresh weight loss, SPAD value, and general appearance of lettuce were investigated after harvest. There was no significant difference in fresh weight loss and general appearance during storage of lettuce by the hydroponics methods. However, with the increased storage time of SPAD, which is related to chlorophyll content, was slightly higher in peat moss medium hydroponic was than DWC. When crops such as lettuce are grown under favorable conditions without any agronomic abnormalities, it is suggested that post-harvest storage is not significantly affected by peat moss growing medium hydroponic and DWC.

• Journal of Sericultural and Entomological Science
• /
• v.29 no.2
• /
• pp.67-72
• /
• 1987

This study was carried out for the optimum predegumming in the protease degumming process of silk fabrics by ocmparing the physical properties of silk fabrics degummed with different weight losses of predegumming. 1. In twill habutai, the stiffness of fabric was reduced and the smoothness was improved with increasing weight loss of predegmming, however, the soft feeling value which means the total handle value of medium fabric for lady, was maximum at 20% of predegumming weight loss. 2. In the case of crepe de chine representing thin fabric for lady, the anti-drape stiffness was relatively increased with 22% weight loss of predegumming. However, the other physical properties, such as the flexibility with soft feeling were less related to the degrees of predegumming.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.5
• /
• pp.665-671
• /
• 2003

A factorial experiment was conducted to assess nutrient utilization by growing lambs maintained on three levels each of digestible energy (high: HE, medium: ME, low: LE) and protein (high: HP, medium: MP, low: LP) in nine combinations (HEHP, HEMP, HELP, MEHP, MEMP, MELP, LEHP, LEMP, LELP). The experiment was conducted during the hot season in a semiarid location. Daily dry matter intake (DMI) was similar in all the groups in terms of unit body weight or metabolic body size. Digestibility of DM and nitrogen free extract increased (p<0.01) from low to medium and high energy regimen while the CF digestibility followed a reverse trend. The digestibility of crude protein (CP) decreased from high to medium and low protein regimens while it was similar in terms of energy variation. Nitrogen intake was higher in high followed by medium and low protein regime while fecal and urinary nitrogen loss were similar in all the treatment groups. Lambs in all the three levels of protein were in positive N balance and percent N retention was higher (p<0.01) in high followed by medium and low protein levels whereas it was similar in terms of energy variation. Initial body weight was similar in all the groups while final weight, total gain in the experiment and average daily gain (ADG) were higher in high than medium and low energy regimens. It is concluded that crossbred lambs required 75.1 g DM, 9.6 g CP, 6.3 g DCP and 711 KJ DE/kg W $^{0.75}$or 11.0 g CP/MJ DE or 7.2 g DCP/MJ DE for 93 g average daily gain in a hot semiarid environment.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.1
• /
• pp.1-9
• /
• 2015

Wood fibers for medium density fiberboard (MDF) was used in the filler layer of the white duplex board for increasing thickness and bulk of the board. The MDF fibers were treated with ozone (3% based on dry weight of the fibers), and mixed together with OCC (old corrugated container) to form paper. Ozone-treated MDF fibers gave high bulk, high tensile strength, high internal bond and fast drainage to the furnish mixed with OCC. It was shown that there were possibilities to reduced basis weight of the filler layer without loss of thickness, stiffness, and tensile strength. Furthermore, it showed the possibility to develop a new kind of board product that has high stiffness as well as high strength properties with light basis weight by application of the ozone-treated MDF fibers.