• Journal of the Society of Naval Architects of Korea
• /
• v.52 no.3
• /
• pp.248-254
• /
• 2015

The strength and fatigue life of Satin and Twill-woven CF/epoxy composite(CFRP) have been investigated. Damage mechanism fatigue method has been used to assess fatigue damage accumulation. It is based on measured residual stiffness and residual strength of carbon-fiber reinforced plastic(CFRP) laminates under cyclic loading. Fatigue damage evolution in composite laminates and predict fatigue life of the laminates were simulated by finite element analysis(FEA) method. The stress analysis was carried out in MSC patran/Nastran. A modified Hashin's failure criterion di rmfjapplied to predict the failure of the experimental data of fatigue life but a Ye-delamination criterion was ignored because of 2D modeling. Almost linear stiffness and strength degradation were observed during most of the fatigue process. These stress distribution data were adopted in the simulation to simulate fatigue behavior and estimate life of the laminates. From the results, the predicted fatigue life is more conservatively estimated than the experimental results.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.41-44
• /
• 2008

The purposes of this study are to estimate thestrength of concrete and quantify the deterioration of concrete by a unique X-ray technique with a contrast medium. In order to estimate the strength of concrete, specimens with different water-cement ratios were fabricated using non-air-entrained concrete, air-entrained concrete and mortar to determine the relationship between their compressive strength and the transit dose obtained by the X-ray technique. Also, an experiment to quantify deterioration was carried out on specimens that were subjected to freezing and thawing action to different levels of dynamic elastic modulus. As a result of this experiment, estimation of the strength and relative dynamic elastic modulus of deteriorated mortar, concrete and air-entrained concrete was found feasible by measuring the transit dose by the X-ray technique.

• Korean Journal of Medicinal Crop Science
• /
• v.15 no.5
• /
• pp.346-351
• /
• 2007

An efficient somatic embryogenesis and plant regeneration protocol was developed for Schisandra chinensis Baill, using embryogenic cell suspensions and optimized media conditions. Friable embryogenic callus was induced from cotyledonary leaf and hypocotyl explants of 7 days old seedlings on MS agar medium supplemented with 1.0 to $4.0\;mg\;l^{-1}$ of 2,4-dichlorophenoxyacetic acid (2,4-D). Fast growing and well dispersed embryogenic cell suspensions were developed within two months when embryogenic calli were transferred to MS liquid medium containing $1.0\;mg\;l^{-1}\;2,4-D$. One third strength of MS medium was the best for both overall growth and development of somatic embryos in liquid culture. Over 3400 viable somatic embryos were produced from each 150 ml flask with an initial cell density of 30 mg in 30 ml medium. Germinated somatic embryos developed in liquid medium converted into plantlets after transferred to half-strength MS semi-solid medium. Approximately 90% of the converted plantlets were successfully transplanted to soil and grew into fertile plants.

• Korean Journal of Plant Resources
• /
• v.19 no.2
• /
• pp.265-272
• /
• 2006

This study was conducted to investigate the efficient propagation method of Cyrtomium caryoptideum var. coreanum by sporophyte culture. The influence of origin of explant sources (rhizome, blade, or stipe) and homogenization of culture materials on shoot regeneration were investigated. As a result, only rhizome explant exhibited the organogenic capacity and the shoot regeneration was promoted by homogenization of culture material. Vigorous and excellent growth of multiple shoots was induced on the half-strength of inorganic salts containing MS medium. It was appeared that optimum nitrogen content of shoot regeneration was half-strength of nitrogen containing MS medium (30mM) and optimum sucrose concentration was 1%. Addition of $NaH_2PO_4$ to culture medium generally enhanced shoot multiplication and promoted growth of the regenerants. The organogenic capacity of homogenized rhizomes was especially promoted on medium supplemented with $5{\mu}M$ kinetin plus $5{\mu}M$ IBA. The incorporation of $0.1\sim0.2%$ activated charcoal on medium supplemented with growth regulators prevented the formation of multiple bud primordia - nodule-like bud clusters and improved the normal morphogenesis of sporophytes.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.11 no.1
• /
• pp.26-31
• /
• 2006

The saccharogenic liquid (SFW) obtained by the enzymatic saccharification of food wastes was used as a medium for production of bacterial cellulose (BC). The enzymatic saccharification of food wastes was carried out by the cultivation supernatant of Trichoderma harziaum FJ1 culture. Acetobacter xylinum KJ1 was employed for the BC production culture. The physical properties, such as polymerization, crystallinity, Young's modulus, and tensile strength, of BCs produced by three culture methods: the static cultures using HS (Hestrin-Schramm) as a reference medium (A) or the SFW medium (B), the shaking culture (C) or the air circulation culture (D) using the SFW medium, were investigated. The degrees of polymerization of BCs produced under the different culture conditions (A-D) showed 11000, 9500, 8500, and 9200, respectively. Young's modulus was 4.15, 5.0, 4.0, and 4.6 GPa, respectively. Tensile strength was 124, 200, 80, and 184 MPa, respectively. All of the BC had a form of cellulose I representing pure cellulose. In the case of the shaking culture, the degree of crystallinity was 51.2%, the lowest degree. Under the other culturing conditions, the trend should remain in the range of 89.7-84%. Overall, the physical properties of BC produced from SFW were similar to those of BC from HS medium, a commercial complex medium, and BC production by the air circulation culture mode brought more favorable results in terms of the physical properties and its ease of scale-up. Therefore, it is expected that a new BC production method, like air circulation culture using SFW, would contribute greatly to BC-related manufacturing.

• Korean Journal of Plant Resources
• /
• v.19 no.3
• /
• pp.422-426
• /
• 2006

This research was conducted to get the basic materials necessary to obtain the somatic hybrid plant between Solanum sisymbriifolium and other Solanum species (S. integrifolium and S. toxicarium). Regarding the formation of colony from the protoplast in S. sisymbriifolium, S. integrifolium and the fused protoplast mixture; for the S. sisymbriifolium, a colony was observed in F medium(Kao medium containing $5.0mg{\cdot}L^{-1}\;NAA,\;1.0mg{\cdot}L^{-1}$ 2,4-D and $1.0mg{\cdot}L^{-1}$ BA); and for the S. integrifolium, in G medium (a half strength MS medium containing 0.03 M sucrose, 0.4 M mannitol, $1.0mg{\cdot}L^{-1}\;NAA,\;1.0mg{\cdot}L^{-1}$ kinetin) respectively. In mixed cultured protoplast after electriofusion treatment, the cell division and colony formation were observed in both media F and G. For the shoot and root formation rate, there was no difference between the parent of each breed and mixed protoplast regardless of the medium. In the fused protoplast mixture of S. sisymbriifolium and S. toxicarium, a colony formation was also observed in both media F and H(a half strength MS medium containing 0.03 M sucrose, 0.4 M mannitol, $1.0mg{\cdot}L^{-1}\;NAA,\;1.0mg{\cdot}L^{-1}$ kinetin); and there was no difference in the shoot and root formation rate between the parent and the mixed protoplast.

• Journal of the Korean Wood Science and Technology
• /
• v.18 no.2
• /
• pp.67-78
• /
• 1990

This study was performed to determine the characteristics of physical and mechanical properties of domestic wood based materials; plywood, particleboard, medium density fiberboard. Main items of tested properties were panel size, moisture content, water absorption, linear expansion and thickness swelling, glue bond shear strength, bending properties(stress at proportional limit, modulus of rupture. modulus of elasticity), tensile strength, screw holding strength, and internal bond as neccessary. the results were discussed mainly with Korean Standards. The obtained conclusions are as follows; 1. Length and width of 3mm thin plywood(3-ply) and 12mm thick plywood(7-ply) were satished with KS-standard, but thicknesses of these panels were not- passed tolerance limit except one of eight makers. 2. Length and width of particleboard and medium density fiberboard were greater than the tolerance limit value of KS standard, but the thicknesses of these panels were passed this value. 3. Moisture contents of 12mm thick and 3mm thin plywood were satisfied with KS-standard except one mill made 3mm thin plywood. 4. Moisture absortion of plywood was not passed tolerance limit of KS-standard but particleboard was satisfied with this standard value. 5. Dry and wet shear strengths in glue bond of 3mm thin plywood were not reached to KS-standard, but those of 12mm thick plywood were sufficiently satisfied with KS standrad. 6. Modulus of ruptures, parallel to grain and perpendicular to grain of plywood, and particleboard and medium density fiberboard were satisfied with KS-standard. 7. Tensile strengths, parallel to grain and perpendicular to grain of plywood were satisfied with allowance stress of US product standard PS 1-74. 8. Screw holding strength of particleboard was not reached to KS standard, but internal bond was satisfied with KS standard.

• Journal of the Korea Concrete Institute
• /
• v.12 no.2
• /
• pp.13-20
• /
• 2000

In this study, the compression test of steel fiber reinforced high-strength concrete have been performed with varying strengths and volume factions of steel fiber. Three types of matrices including low strength concrete( c'=30 MPa), medium strength concrete( c'=50 MPa), and high strength concrete( c'=70 MPa) were selected. Five types of fiber fractions were studied including 0.0%, 0.5%, 0.75%, 1.0%, and 1.5% by volume. From the results of the compressive strength test, the post-peak characteristics of the stress-strain relationship were investigated, and the existing equations to predict the elastic modulus were experimentally evaluated.

• Computers and Concrete
• /
• v.33 no.2
• /
• pp.217-240
• /
• 2024

The purpose of this study is to propose new hysteretic characteristics of medium- to low-rise RC structures controlled by both shear and flexure. Through previous study, the dual lateral force-resisting system composed of shear and flexural failure members has a new failure mechanism that cooperates to enhance the flexural capacity of the flexural failure member even after the failure of the shear member, and the existing theoretical equation significantly underestimates the ultimate strength. In this study, the residual lateral strength mechanism of the dual lateral force-resisting system was analyzed, and, as a result, an equation for estimating the residual flexural strength of each shear-failure member was proposed. The residual flexural strength of each shear-failure member was verified in comparison with the structural testing results obtained in previous study, and the proposed residual flexural strength equation for shear-failure members was tested for reliability using FEA, and its applicable range was also determined. In addition, restoring-force characteristics for evaluating the seismic performance of the dual lateral force-resisting system (nonlinear dynamic analysis), reflecting the proposed residual flexural strength equation, were proposed. Finally, the validity of the restoring-force characteristics of RC buildings equipped with the dual lateral force-resisting system proposed in the present study was verified by performing pseudo-dynamic testing and nonlinear dynamic analysis based on the proposed restoring-force characteristics. Based on this comparative analysis, the applicability of the proposed restoring-force characteristics was verified.

• Korean Journal of Medicinal Crop Science
• /
• v.14 no.5
• /
• pp.293-298
• /
• 2006

Optimum culture conditions for high frequency plant regeneration from leaf explants of Kalanchoe daigremontiana Hamet &Perrier were established. Shoot regeneration was achieved from leaf explant cultures using MS medium supplemented with indole-3-acetic acid (IAA) and thidiazuron (TDZ) or benzyladenine (BA). Percent regeneration was influenced by plant growth regulators and source of explants. MS medium supplemented with TDZ (1.0 mg/l) and IAA (0.4 mg/l) was the most effective, providing shoot regeneration for 76.7 % of ex vitro leaf explants associated with a high number of shoots per explant (9.5 mean shoots per explant), whereas 100% shoot regeneration associated with 12.4 shoots per explant occurred from in vitro leaf explants on the same medium. Clusters of shoots were multiplied and elongated on MS medium containing several concentrations of BA. MS medium supplemented with 0.25 mg/l BA was proved as the most effective shoot elongation medium. Elongated shoots (2-3 cm) were rooted at 100% on half-strength MS medium. Rooted plantlets were then transferred to potting soil. Regenerated plants were established in the soil with 90% success.