• Macromolecular Research
• /
• v.13 no.1
• /
• pp.14-18
• /
• 2005

Under irradiation in a microwave oven, six novel poly(amide-imide)s containing tetrahydropyrimidinone, tetrahydro-2-thioxopyrimidine moieties and trimellitic rings in their main chains were synthesized through the polycondensation reaction of N,N'-(4,4'-diphenylether)bis(trimellitimide) diacid chloride with six different derivatives of tetrahydropyrimidinone and tetrahydro-2-thioxopyrimidine in the presence of a small amount of a polar organic medium, such as o-cresol. The polycondensation proceeded rapidly and completed within 7-9 min, producing a series of new poly(amide-imide)s in high yield that showed inherent viscosities in the range 0.33-0.52 dL/g. These poly(amide-imide)s were characterized by elemental analysis, viscosity measurement, thermal gravimetric analysis, solubility test, and FT-IR spectroscopy. All of the polymers were soluble at room temperature in polar solvents such as N,N-dimethylacetamide, N,N-dimethylformamide, dimethylsulfoxide, tetrahydrofuran, and N-methyl-2-pyrrolidone.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.1
• /
• pp.81-84
• /
• 1999

The emission and excitation spectra of [Cr(NH3)5(imH)](ClO4)3·H2O (imH=imidazole) taken at 77 K are reported. The 298 K visible and far-infrared spectra are also measured. The vibrational intervals of the electronic ground state are extracted from the far-infrared and emission spectra. The ten electronic bands due to spin-allowed and spin-forbidden transitions are assigned. Using the observed transitions, a ligand field analysis has been performed to determine the bonding properties of coordinated imidazole in the title chromium(Ⅲ) complex. It is confirmed that nitrogen atom of the imidazole ligand has a medium it-acceptor property toward chromium(Ⅲ) ion. The zero-phonon line in the excitation spectrum splits into two components by 181 cm-1, and the large 2Eg splitting can be reproduced by the ligand field theory.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.5 no.5
• /
• pp.345-349
• /
• 2000

To easily separate chitosanoligosaccharides by size exclusion, an coencapsulating technology of substrate and enzyme was developed. The membrane was composed of alginate and a divalent cation such as calcium. Chitosan and chitosanase were enveloped in this membrane and the product released to medium by size exclusion. The capsule was stabilized in a 2% acetic acid solution (pH 5.0) containing 0.145 M CaCO$_3$. The leakage of substrate caused by the agitation speed was controlled by increasing alginate and CaCO$_3$concentrations. The lower limit of the alginate concentration and the agitation speed were 0.5% and 49rpm, respectively. Membrane thickness and capsule diameter were 10$\mu\textrm{m}$ and 2.5mm, respectively. By TLC analysis, the composition of chitosanoligosaccharides were mainly 3-6 mers. The molecular weight distribution of the released oligosaccharides ranged from 262 to 3624 Da by GPC.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.10
• /
• pp.3063-3070
• /
• 2014

In this study, poly(N-methylol methacrylamide) (NMMAAm) and poly(N-methylol methacrylamide/vinyl sulphonic acid) (NMMAAm-VSA) hydrogels were synthesized by $^{60}Co-{\gamma}$ ray irradiation at an ambient temperature. The graphs belonging to the gelation percent- percent-dose and swelling curves were drawn by using data which were obtained from water and different pH solutions. Characterization of hydrogels was performed by FTIR and DSC-TGA analysis. Heavy metal ion ($Ni^{2+}$, $Co^{2+}$) removal capacities of hydrogels were investigated in aqueous solutions, which had different concentrations (100-1500 mg/L). In metal ion removal studies, pH value of aqueous medium was kept constant at 5.0. Maximum metal ion removal values were obtained for NMMAAm-VSA (1:3 mole ratio) hydrogels. Metal ion removal capacities of NMMAAm-VSA (1:3 mole ratio) hydrogels were found as 82 mg/g and 98 mg/g for $Ni^{2+}$ and $Co^{2+}$ ions, respectively.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.2
• /
• pp.126-132
• /
• 1994

RhCl [P($C_6H_5)_3]_3$ complexes have been incorporated in polysulfone (PS) as a dispersion medium using cosolvent (THF). The interactions between Rh(Ⅰ) complexes and polysulfone polymer molecules are examined by infrared spectroscopy and thermal analysis. The chemical reactivity of Rh in PS films has been investigated by reacting Rh sites with CO, $H_2,\;D_2,\;O_2\;NO,\;C_2H_2\;and\;C_2H_4$ in the temperature range $25-200^{\circ}C$. Various Rh-carbonyl, -hydride and -nitrosyl species formed in PS films are characterized by their infrared spectra. Rh complexes in PS film show interesting catalytic reactivities in the reactions such as hydrogenation of $C_2H_2\;and\;C_2H_4$, oxidation of CO, and reduction of NO by CO or $H_2$ gas under relatively mild conditions.

• Korean Chemical Engineering Research
• /
• v.62 no.1
• /
• pp.112-117
• /
• 2024

Numerical simulations on the onset and the growth of viscous fingering during the miscible displacement due to the radial source flow were conducted. With introduction of a new stability criterion, the critical log-viscosity ratio, R_c, was found as a function of the Peclet number, Pe. Similar to the previous linear stability analyses, Pe made the system unstable, i.e., accelerated the onset of instability. For a large Pe system, the present numerical simulation yielded much stable results than the previous theoretical predictions This discrepancy was commonly encountered in the comparison between the theoretical prediction and the experimental finding. Additionally, the difference between the rectilinear system and the present one was also discussed. The present system was found more insensitive to the Peclet number than the rectilinear one.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.12
• /
• pp.2293-2298
• /
• 2007

In this study, a dithizone extraction technique involving purge & trap GC-MS was developed for the determination of methylmercury in biological samples, especially blood and fish. After alkaline digestion, methylmercury in biological samples was extracted into dithizone and back-extracted into aqueous sulfide solution. The extracted methylmercury was converted to the volatile ethyl derivative, purged and trapped onto a solid-phase collection medium, and then introduced into the GC-MS system. The determined MDLs of the established method were 0.9 ng·g?1 for biological samples and its accuracy and precision were found to be 93% and 3.8%, respectively. The method was validated by analysis of CRMs such as SRM 966, BCR 463 and IAEA 407 and all analytical results were within certified ranges with average RSDs of less than 6%. The analytical results of field-sampled fish also showed that the method can be successfully used as an alternative for commonly used distillation method followed by GC-CVAFS detection.

• KSBB Journal
• /
• v.20 no.5 s.94
• /
• pp.345-349
• /
• 2005

The microorganism for odor gas removal was isolated from sewage and contaminated soil. This was characterized as Pseudomonas sp. TKC by morphological, biochemical/physiological, and cultural characteristics analysis of the isolates. The optimum conditions for isolates growth were as follows; substrate concentration 500 ppm, initial medium pH 7.0, incubation temperature $30^{\circ}C$, agitation speed 150 rpm, and MSM medium containing 3 g/L $(NH_4)_2SO_4$.

• Fashion & Textile Research Journal
• /
• v.26 no.1
• /
• pp.110-122
• /
• 2024

This study aims to cultivate specialized professionals equipped with practical skills essential for compliance with textile environmental regulations and analysis of harmful substances. This is achieved through the revision and restructuring of educational programs targeting workers in the chemical analysis industry. To address this, a survey was conducted among chemical industry workers in small and medium-sized enterprises (SMEs) to gauge the demand for educational programs. Specifically, a survey was conducted among 240 SME workers who participated in the 2022 education curriculum to identify their educational needs and specific requirements in the field. The research findings indicate that the majority of SMEs recognize the necessity of education in the chemical field and express a strong willingness to engage in the curriculum. Particularly emphasized was the need to enhance practical skills crucial for compliance with chemical environmental regulations. Consequently, adjustments were made to the curriculum, reallocating time and increasing the duration of practical training. This enables trainees to directly operate analysis machines and interpret results. Additionally, in response to further educational demands reflected by survey participants, the curriculum was expanded from five to six courses, with adjustments made to existing educational programs. Based on these research outcomes, practical educational methods tailored to SME requirements are proposed, aiming to bridge the gap between regulatory compliance and industry needs.

• Korean Chemical Engineering Research
• /
• v.50 no.2
• /
• pp.317-327
• /
• 2012

The average specific cake resistance, the most important indicator for cake filtration and solid-liquid separation, is measured by filtration experiment. But the exact value is difficult to measure because of the other influences such as sedimentation during filtration. This study, a little more stable method named filtration-permeation is proposed for measuring average specific cake resistance. The filtration-permeation is composed of permeation of particle eliminated water through pre-formed cake by filtration. Using 1 wt% calcium carbonate suspension, the filtration-permeation experiments were performed for 8 kinds of filter media at the conditions of 0.5 atm and 0.2 atm, 1 and 3 sheets of filter media. At each specific condition, three to five times filtration-permeation were accomplished. As a result, stable permeation speed is measured. According to this experimental result, the characteristics of permeation and the effect of sedimentation are analyzed with Ruth's equation. The one way analysis of variance (one way ANOVA) is applied to the average specific cake resistances of filtration and permeation obtained with the selected three kinds of filter media. The average specific cake resistances between 0.5 atm and 0.2 atm by filtration do not distinguished, but those by permeation is perfectly distinguished. The experimental results during permeation have a very narrow distribution than that measured during filtration. The analysis of filtration experiments, it was verified that the resistance of filter medium by traditional method is of no significance. Finally, the migration of small particles through the medium composed of fiber glass at low pressure was studied.