• Current Optics and Photonics
• /
• 제5권1호
• /
• pp.72-76
• /
• 2021

The polarized micro-photoluminescence spectrum was analyzed to investigate the anisotropic localized states in a single GaAs quantum ring. An energy difference of ~0.1 meV was observed from the perpendicularly polarized spectrum measured by a pair of linear analyzers. Spectral dependence of the polarized emission was also characterized in terms of rotation and ellipticity angles using four Stokes parameters. While the rotation angle indicates the symmetric axis of an anisotropic quantum ring with a small variation (± 2°), the ellipticity angle varies from 7.4° down to -2.5°. We conclude that optical anisotropy and birefringence are induced by the crescent-like lateral shape of localized states.

• Current Optics and Photonics
• /
• 제6권1호
• /
• pp.86-91
• /
• 2022

Two-photon fluorescence microscopy was performed on the enamel-dentin junction area of a human tooth using a femtosecond pulsed laser. We obtained a clear image contrast between the bright dentin and dark tubules with the autofluorescence generated from the endogenous fluorophores in dentin. The autofluorescence shows a broad spectrum due to complex cross links between dentinal collagens, which extend from blue to orange wavelengths (470-590 nm), but a gradual autofluorescence loss in photobleaching was observed for a long-term exposure under strong excitation. For increasing excitation power, we found that two-step decay becomes significant in the spectrally integrated autofluorescence.

• 공학교육연구
• /
• 제8권2호
• /
• pp.5-15
• /
• 2005

이 논문은 한국공학교육인증원의 공학교육인증 요구조건을 만족시키기 위한 삼척대학교 메카트로닉스 공학전공 교육과정의 연구에 관하여 기술하였다. 국내대학과 외국대학의 메카트로닉스 공학전공의 교육과정을 수집하고 분석하였다. 이 분석결과를 이용하고, 기계공학, 전기공학, 제어공학 그리고 컴퓨터공학의 유기적인 결합을 고려한 교육과정을 제시하였다. 더불어 삼척대학교의 지정학적인 조건과 한국공학교육인증원의 인증요구조건을 반영하였다. 그 결과 학생들에게 분석적인 능력과 실무적인 자질을 개발할 수 있도록 하는 다학제간 교육과정을 개발하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.1289-1293
• /
• 2009

For the purpose of automatic management and enhancing quality of construction, information technology has been employed in construction field recently. As a consequence, informative construction, which utilizes information technology to reduce construction time and optimize construction sequence, becomes a state-of-art field of construction. Considering this case, construction field should more actively adopt other engineering technologies of rapidly advancing fields, such as electronic, control, and informative engineering, in order to reduce construction cost and to solve environmental problems as well as to enhance construction quality. In this aspect, this paper introduces a novel research field 'Geo-mechatronics', which stands for the convergence of geotechnical engineering and mechatronics (i.e. automation of mechanics using electronic technologies). Since the ground is ubiquitous in every infrastructure construction, the Geo-mechatronics research is crucial for the development of construction technology in the future. Moreover, it is believed to that the Geo-mechatronics research will make our construction industry to be more future-oriented and internationally comparative industry.

• Carbon letters
• /
• 제18권
• /
• pp.67-70
• /
• 2016

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 추계학술대회 논문집
• /
• pp.597-598
• /
• 2006

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 추계학술대회 논문집
• /
• pp.513-514
• /
• 2006

• International Journal of Precision Engineering and Manufacturing
• /
• 제7권4호
• /
• pp.3-7
• /
• 2006

Confocal scanning microscopy is a measurement technique used to observe micrometer and sub-micrometer features due to its high resolution, nondestructive properties, and 3D surface profiling capabilities. The design, implementation, and performance test of a confocal scanning microscopy system are presented in this paper. A short-wavelength laser (405 nm) and an objective lens with a high numerical aperture (0.95) were used to achieve the desired high resolution, while the x- and y-axis scans were implemented using an acousto-optic deflector and galvanomirror, respectively. An objective lens with a piezo-actuator was used to scan the z-axis. A spatial resolution of less than 138 nm was achieved, along with successful 3D surface reconstructions.

• 산업기술연구
• /
• 제40권1호
• /
• pp.19-23
• /
• 2020

In this paper, we proposed a PC-based CNC control system using EtherCAT-based servo drive and I/O device. The default communication of LinuxCNC is a parallel port, and data processing with high bandwidth is impossible. However, it is possible to apply various bandwidth devices through the application of EtherCAT, one of the industrial Ethernet communications with high bandwidth. Therefore, the hardware control method of LinuxCNC was applied through EtherCAT communication from the existing parallel port. Finally, through HAL configuration, I/O device operation check and 3-axis motion control proved the LinuxCNC system with EtherCAT.

• 공학교육연구
• /
• 제11권3호
• /
• pp.33-43
• /
• 2008

본 논문에서는 우리나라 메카트로닉스 공학교육을 4년제 대학을 중심으로 분석하였고 그 개선 방향에 관하여 논하였다. 메카트로닉스 공학의 정의어와 발전의 과정, 미국과 유럽대학의 메카트로닉스 공학교육과정에 관하여 분석하였다. 우리나라 대학의 메카트로닉스 공학교육과 외국의 메카트로닉스 공학교육을 분석한 결과 우리나라에서는 공장이나 기계의 자동화가 강조되어 있는 반면 구미에서는 자동제어분야의 교육이 강조되고 있음이 밝혀졌다. 국가 기술자격검정의 내용을 분석하였으며 공업계 고등학교와 대학교육간의 연계교육을 논하였다.