• 한국분말재료학회지
• /
• 제23권3호
• /
• pp.202-206
• /
• 2016

A Ni-Ti-B alloy powder prepared by mechanical alloying (MA) of individual Ni, Ti, and B components is examined with the aim of elucidating the phase transitions and crystallization during heat treatment. Ti and B atoms penetrating into the Ni lattice result in a Ni (Ti, B) solid solution and an amorphous phase. Differential thermal analysis (DTA) reveals peaks related to the decomposition of the metastable Ni (Ti, B) solid solution and the separation of equilibrium $Ni_3Ti$, $TiB_2$, and ${\tau}-Ni_20Ti_3B_6$ phases. The exothermal effects in the DTA curves move to lower temperatures with increasing milling time. The formation of a $TiB_2$ phase by annealing indicates that the mechanochemical reaction of the Ni-Ti-B alloy does not comply with the alloy composition in the ternary phase diagram, and Ti-B bonds are found to be more preferable than Ni-B bonds.

• Elastomers and Composites
• /
• 제56권1호
• /
• pp.6-11
• /
• 2021

In order to develop an ultra-high-density elastomeric material for substitution of steel dynamic dampers, a new curing system and technique for high-loading of the filler were examined in this study. Mechanochemical modification of chloroprene rubber (MAH-g-CR) using an internal mixer was carried out with maleic anhydride (MAH) as a reactive monomer. The optimum amount of MAH was 10 phr and the efficient grafting of MAH on CR could be achieved at a mixing temperature of 100℃. After preparing MAH-g-CR, 50 mol% epoxidized natural rubber (ENR 50) was blended with MAH-g-CR to develop a "self-curable rubber blend system" via reaction between the functional groups of the elastomeric matrices without the curing agent and additives. The content of ENR 50 was fixed at 30 wt.% throughout evaluation of the curing behavior of the MAH-g-CR/ENR blend. Tungsten powder was added to the MAH-g-CR/ENR matrix up to 60 vol.% to obtain ultra-high-density, and the maximum density obtained was 7.57 g/㎤. Stable ts2 (scorch time) and t90 (90% cure time) could be obtained even when tungsten powder was incorporated up to 60 vol.%. In addition, the tensile strength and damping properties of MAH-g-CR/ENR containing 60 vol.% of tungsten were better than those of CR containing 60 vol.% of tungsten.

• 한국건설순환자원학회논문집
• /
• 제7권3호
• /
• pp.262-270
• /
• 2019

본 논문에서는 페로니켈슬래그 미분말 및 혼화재의 복합사용에 따른 모르타르의 강도 및 내구성 평가를 실시하였다. 페로니켈슬래그 및 생석회, 석고, 염화칼슘을 OPC 대비 20%로 치환하여 복합사용 하였으며, 휨강도 및 압축강도, SEM분석을 통한 모르타르의 강도 평가를 실시하였다. 석고를 혼화재로 사용하였을 때 초기강도 발현은 보이지만, 페로니켈슬래그 및 생석회, 염화칼슘을 혼화재로 복합사용 하였을 때 강도발현과 강도증진효과가 극대화 되었으며, 혼화재의 적절한 복합사용이 미세한 공극 채움과 밀도개선효과로 인해 강도와 내구성 개선에 영향을 주는 것으로 판단된다. 또한 화학적침식저항성 및 XRD 분석을 통해 혼화재의 적절한 복합사용은 수화 생성물인 Muscovite의 함량에 따라 강도가 증가하는 경향을 보였고, 규산염은 산 알칼리에는 용해되지 않으므로 화학적 침식 저항 성능이 OPC에 비하여 우수한 것으로 사료된다.