• Advances in aircraft and spacecraft science
• /
• v.6 no.3
• /
• pp.257-272
• /
• 2019

Numerical study of the flutter of a plate on a viscoelastic foundation is carried out in the paper. Critical velocity of the flutter of a plate on an elastic and viscoelastic foundation is determined. The mathematical model for the investigation of viscoelastic plates is based on the Marguerre's theory applied to the study of the problems of strength, rigidity and stability of thin-walled structures such as aircraft wings. Aerodynamic pressure is determined in accordance with the A.A. Ilyushin's piston theory. Using the Bubnov - Galerkin method, the basic resolving systems of nonlinear integro-differential equations (IDE) are obtained. At wide ranges of geometric and physical parameters of viscoelastic plates, their influence on the flutter velocity has been studied in detail.

• Journal of Animal Environmental Science
• /
• v.3 no.2
• /
• pp.87-95
• /
• 1997

This study was peformed to compare work routine time and performance of milking systems by measuring motion and time in milking procedure. Data were collected from thirteen dairy farms among which milking was done by bucket in two farms, by pipelines in three, by tandem parlors in four including one remodeled side-opening, by herringborn parlors in three and by a parallel milking parlor. Recording time and motion for milking parlor. Recording time and motion for milking procedure was performed by stopwatch and notebook computer. Work routine elements were recorded and calculated into cows milked per-man-hour(CMPH). The results are as follows : Average milking time per cow(MTPC) in bucket and pipeline milking systems usually installed in cow stall were 442.7 and 395.8 seconds, respectively. And average CMPH of bucket and pipeline milking system were 144.5, 303.3, 272.5 and 380.3 seconds, respectively. And CMPH of tandem, herringbone, parallel and modified side-opening systems were 24.9, 11.9, 13.2 and 9.5 heads, respectively. CMPH was the highest in the tandem milking system and the lowest in the bucket milking facilities. CMPH, when milked in a parlor resulted in high value compared with bucket or pipeline milking systems installed in cow stable. They showed considerably low CMPH compared with the results of other countries. The reason why so low CMPH could be derived from type and mechanization of facilities and equipment, operator's ability, number of operator, idle time and milking procedure.

• Journal of Korean Society of Forest Science
• /
• v.82 no.2
• /
• pp.195-206
• /
• 1993

The purpose of this study is to provide a basis for establishing regional harvesting systems that ist the prerequisites for the forest mechanization. The factors restricting to the forest harvesting and logging methods from topographical aspects are studied for this purpose. Three main harvesting methods studied in this paper are : shortwood method, longwood method and full tree method. This study shows : the shortwood method is suitable for low, the longwood method for medium, the full tree method for high topographical conditions. For the logging methods, the focus of the study is on various ground based logging systems by animalpower, manpower, gravitation, wheeled & crawler vehicle and cable. The factors limiting the coverage of logging operation are slope and logging distance. The cable crane logging methods are classified by logging distance into short distance(to 300 or 400m), middle distance(to 700 or 800m) and long distance cable crane methods (over 700 or 800m). The wheeled vehicle method shows serious damages to forest resources, whereas the logging by log-line of the gravitation logging method and cable crane method tend to minimize such damages. The wheeled & crawler vehicle method also shows difficult to apply in the high slope conditions, whereas cable crane method can be applied to maximum 120% steep slope and uphill conditions.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11a
• /
• pp.1-30
• /
• 2000

The higher stage of development of plant factory is discussed, that involves technologies such as process control for the plant growth environment, mechanization for material handling, system control for production and computer applications. Further, the advantages of a plant factory include production stabilization, higher production efficiency, and better quality management of products through a shortened growing period, better conditions, lower labor requirements, and easier application of industrial concepts. Finally, to realize the ultimate plant factory using both solar and artificial light, the intelligent approach from control engineering, physiological ecology and artificial intelligence(AI) may be inevitable and introduced based on some works done by authors.

• Asian Journal of Business Environment
• /
• v.14 no.1
• /
• pp.23-30
• /
• 2024

Purpose: The purpose of this research is to explore the macroeconomic model through both static and dynamic equations. The primary objective of this study is to investigate the variations in the elasticity of substitution across changing economic variables within the framework of the Allen-Uzawa production functions. Research, design, data and methodology: The data were drawn from the World Bank's annual central statistical office database from 2010 to 2021 in the United States of America. The level of expenditures and of the public finance sector, macroeconomic data like output, inflation rates, and labor are examined. Results: This study demonstrates the interaction of two equations, clarifying that the macroeconomic model is practical to determining the stability of both static and dynamic equation systems analytically. The Allen-Uzawa equations allow for the verification of macroeconomic model properties, and study results demonstrate an increase in the range of capital uses as a form of mechanization. A constant elasticity of substitution function is derived from the macroeconomic variables. Conclusion: The macroeconomic model, though the analysis of the static and dynamic Allen - Uzawa model, not only facilitates the examination of long-term trends in crucial endogenous variables but also overcomes challenges commonly associated with other mathematical methods. Overall, the analysis promotes economic growth, investment, and employment. The levels of expenditures and the public finance sector, along with macroeconomic data such as output, inflation rates, and labor, are examined.

• Korean Journal of Agricultural Science
• /
• v.22 no.1
• /
• pp.110-126
• /
• 1995

Korean economy has been developed successfully in the course of implementing the five year economic development plans since 1962. The gap of incomes and quality of life between rural and urban area has been widened and it made rural farm laborers drain to urban areas. Therefore the prevailing situation of labor shortage and wage hike in rural area has made farm management deteriorate in recent years. Under the internal and international unfavorable economic conditions, marginal farm land of 66.5 thousand ha has been idled as of end of 1993. The total area outside agricultural development zone with bad farming conditions including irrigation and drainage, and land consolidation for mechanization were estimated at 360.4thousand ha equivalent to 17.5% of the total farm land area in Korea. Considering the topographical conditions of marginal lands, the effective use of marginal lands should be studied from the view point of public interest rather than from the view point of individual economic conditions. Considering the present agricultural economic settings, such as price decrease, unfavourable benefits of farm products, labour shrotage, free trade of farm products and poor physical condition of marginal lands, the institutional and realistical measures for the effective utilization of idle and marginal land should be studied as soon as possible. Detail land use pattern should be surveyed in the areas outside agricultural development zone and have to be classified as orchard farms, grass land, fish culture farms, lawn and ornamental tree farm, sight seeing and leisure farms for urban peoples, special crops production farms and common farms to be developed for farm mechanization. According to the surveyed results, the expected utilization patterns of the idle and marginal lands could be considerd as village common use, farm land base development, leisure farm development, mutual complementary utilization between urban and rural areas, G't purchase and management, credit supply and new extension services, improvement of cropping patterns and sight seeing and leisure farm patterns. For the successful and reasonable management of the marginal lands, the actions such as institutional improvement, prohibition of idle marginal land, enforcement of activities of farm management committee members and land banking system of RDC including development and utilization systems should be included.

• Korean Journal of Agricultural Science
• /
• v.49 no.4
• /
• pp.677-696
• /
• 2022

Development of radish collectors may enhance radish production and promote upland crop mechanization in the Republic of Korea. Theoretical analysis of power is crucial to ensure the optimum design of agricultural machinery. The aim of the present study is to analyze theoretically the power requirement of a tractor-mounted radish collector under development and to propose design guidelines. The important components of the radish collector were belt-type conveyors, three hydraulic motors, and a direct current (DC) winch motor to operate the total radish collecting process. Theoretical equations were used to calculate the hydraulic motor's power, winch motor power, and draft power at loaded and unloaded conditions. A variety of tractors (44 - 74 kW) and different soil characteristics (hard, firm, tilted, and sandy) were considered to investigate the appropriate drawbar power. Variations of the power requirement of the tractor-mounted radish collector were observed due to modifications of the design parameters. The required hydraulic power of the stem cutting conveyor, stem cutting blade, and transfer conveyor of the radish collector were 0.23 and 0.24, 0.18 and 0.19, and 0.19 and 0.22 kW under unloaded and loaded conditions, respectively. The maximum draft power was calculated as 0.89, 1.07, 1.25, and 1.61 kW at a 30° tilted angle for hard, firm, tilted, and sandy soil, respectively. The calculation showed 2.07 kW DC power was required for unfolding or folding the stem-cutting conveyor. A maximum power of 4.78 kW was prescribed for conducting the whole process of the tractor-mounted radish collector. The analysis of power introduced in this study will be helpful to select the appropriate design parameters for the successful development of a tractor-mounted radish collector.

• Journal of the Ergonomics Society of Korea
• /
• v.28 no.3
• /
• pp.125-134
• /
• 2009

The muscle strengths in various postures are used in our daily life with or without our recognition. Also, many works are still performed with strengths, although mechanization and automation have been fairly accomplished at the industry site. Since the late seventies, various body measurements have been conducted periodically in Korea, however, muscle strengths have not been measured actively. For this reason, the muscle strength data have been hardly accumulated. The aims of this study are to learn more about the physical strength of young-aged Koreans and to provide basic information for designing equipments, tools and facilities in the work site and daily life. The muscle strengths that are related to shoulder and upper limbs joints, which are used frequently, are measured in this study. Eighteen muscle strengths, from seven different movements such as elbow flexion, elbow extension, shoulder abduction(seated), shoulder adduction(seated), shoulder rotation(internal and external), lifting a tray, and turning a key(inward and outward) were measured. For every movement, the muscle strengths for both hands were measured. In each measurement, five seconds averaged value and peak value were collected. Comparing the average value, the strength of shoulder adduction was the strongest for male and female, while strength of turning a key inward with left hand was the weakest for male and female. Strengths of preferred hand in elbow extension, shoulder abduction, shoulder external rotation, lifting a tray, and turning a key were stronger than those of non-preferred hand for both male and female. Rohrer's index considerably had an effect on muscle strength. The results of this study can provide some basic information not only in designing the equipment and facilities in work site or daily life, but also in selection, training and management of workers.

• Journal of Biosystems Engineering
• /
• v.27 no.2
• /
• pp.133-142
• /
• 2002

This is a fundamental study to develop a sensor to detect weeds in paddy field using machine vision adopted spectralphotometric technique in order to use the sensor to spread herbicide selectively. A set of spectral reflectance data was collected from dry and wet soil and leaves of rice and 6 kinds of weed to select desirable wavelengths to classify soil, rice and weeds. Stepwise variable selection method of discriminant analysis was applied to the data set and wavelengths of 680 and 802 m were selected to distinguish plants (including rice and weeds) from dry and wet soil, respectively. And wavelengths of 580 and 680 nm were selected to classify rice and weeds by the same method. Validity of the wavelengths to distinguish the plants from soil was tested by cross-validation test with built discriminant function to prove that all of soil and plants were classified correctly without any failure. Validity of the wavelengths for classification of rice and weeds was tested by the same method and the test resulted that 98% of rice and 83% of weeds were classified correctly. Feasibility of CCD color camera to detect weeds in paddy field was tested with the spectral reflectance data by the same statistical method as above. Central wavelengths of RGB frame of color camera were tried as tile effective wavelengths to distingush plants from soil and weeds from plants. The trial resulted that 100% and 94% of plants in dry soil and wet soil, respectively, were classified correctly by the central wavelength or R frame only, and 95% of rice and 85% of weeds were classified correctly by the central wavelengths of RGB frames. As a result, it was concluded that CCD color camera has good potential to be used to detect weeds in paddy field.

• Journal of Biosystems Engineering
• /
• v.16 no.4
• /
• pp.384-398
• /
• 1991

A computer program was developed to select the optimum size of farm machine and analyze its operation costs according to various farming conditions. It was written in FORTRAN 77 and BASIC languages and can be run on any personal computer having Korean Standard Complete Type and Korean Language Code. The program was developed as a user-friendly type so that users can carry out easily the costs analysis for the whole farm work or respective operation in rice production, and for plowing, rotarying and pest controlling in upland. The program can analyze simultaneously three different machines in plowing & rotarying and two machines in transplanting, pest controlling and harvesting operations. The input data are the sizes of arable lands, possible working days and number of laborers during the opimum working period, and custom rates varying depending on regions and individual farming conditions. We can find out the results such as the selected optimum combination farm machines, the overs and shorts of working days relative to the planned working period, capacities of the machines, break-even points by custom rate, fixed costs for a month, and utilization costs in a hectare.