• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 C
• /
• pp.1301-1303
• /
• 1997

This study was performed to investigate the deposition mechanism of $SiO_2$ by ArF excimer Laser(193nm) CVD with $Si_2H_6$ and $N_2O$ gas mixture and evaluate Laser CVD quantitatively by modeling. In this study, new model of $SiO_2$ deposition process by Laser CVD is introduced and deposition rates are simulated by computer with the basis on this modeling. And simulation results are compared with experimental results measured at various conditions such as reaction gas ratio, chamber pressure, substrate temperature and laser beam intensity.

• Coupled systems mechanics
• /
• 제7권2호
• /
• pp.111-139
• /
• 2018

A successful methodology for modelling controlled destruction and progressive collapse of 2D reinforced concrete frames is presented in this paper. The strategy is subdivided into several aspects including the failure mechanism creation, and dynamic motion in failure represented with multibody system (MBS) simulation that are used to jointly capture controlled demolition. First phase employs linear elasto-plastic analysis with isotropic hardening along with softening plastic hinge concept to investigate the complete failure of structure, leading to creation of final failure mechanism that behaves like MBS. Second phase deals with simulation and control of the progressive collapse of the structure up to total demolition, using the nonlinear dynamic analysis, with conserving/decaying energy scheme which is performed on MBS. The contact between structure and ground is also considered in simulation of collapse process. The efficiency of the proposed methodology is proved with several numerical examples including six story reinforced concrete frame structures.

• International Journal of Internet, Broadcasting and Communication
• /
• 제15권1호
• /
• pp.1-7
• /
• 2023

TCP is considered a major candidate transport protocol even for constrained IoT networks due to its ability to integrate into the existing network infrastructures. Since TCP implementations such as uIP TCP often allow only a single TCP segment per connection to be unacknowledged at any given time due to resource constraints, the congestion control relies only on RTO management. In our previous work, to address the problem that uIP TCP performs poorly particularly when a radio duty cycling mechanism is enabled and the hidden terminal problem is severe, we proposed a RTO scheme for uIP TCP and validated the performance through Cooja simulation. In this study, we investigate the effect of other factors that were not considered in our previous work. More specifically, the effect of traffic intensity, the degree of the hidden terminal problem, and RDC is investigated by varying the offered load and the transmission range, and the RDC channel check rate. Simulation results imply that we need to further investigate how to improve TCP performance when the radio duty cycling mechanism is used.

• 한국통신학회논문지
• /
• 제35권11B호
• /
• pp.1659-1666
• /
• 2010

고기동 유도탄들은 다양한 탄내 인터페이스와 빠른 유도 조종 루프를 가진다. 그러므로 Hardware-in-the-Loop(HWIL) 시뮬레이션 제어 시스템은 고성능의 연산기능 및 하드웨어 인터페이스 기능을 가져야 하며, 실시간 운영체제, 임베디드 시스템, 자료 통신, 실시간 하드웨어 제어와 같이 다양한 IT 분야를 융합하여 개발되어야 한다. 이 논문은 고기동 유도탄의 HWIL 시뮬레이션을 수행하기 위한 제어 시스템 설계 기법으로 시스템 하드웨어 구성, 고성능의 다중 프로세서를 사용하기 위한 업무 할당 알고리즘, HWIL 시뮬레이션 실시간 연산 및 제어 기법, 프로세서 통신 기법, 실시간 자료 획득 기법을 제시한다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.723-728
• /
• 2003

Planetary gearheads are widely used in the transmissions of samll precision mechanism, automation, robotics, heavy machinery and marine vehicle . Planetary gearheads have advantages that same-axle structure, high torque transmission, low noise in comparison with spur gearheads. And, planetary gearheads are typically specified in application where space is limited. In till study included planetary type gearheads design, manufacture, efficiency test. Especially, this time performed gear mesh stiffness simulation and vibration analysis for planetary gearheads.

• 소음진동
• /
• 제7권4호
• /
• pp.669-679
• /
• 1997

This paper deals with a study of striker type impact hammer drill for improving the drilling performance. The study was performed through a numerical simulation of the impact hammer mechanism and an experimental comparison of the numerical simulation results was followed. Optimization of the impact mechanism was also performed. The numerical model of the impact hammer drill takes into account the striker motion and the effects of the pressure in the cylinder as well as the friction acting on the striker. The equation of motion is solved with the pressure equation in the cylinder including the friction force. The friction is considered as a combination of Coulomb friction and viscous damping friction. At the moment of impact, an ideal impact model that uses restitution coefficient is used to calculate the sudden change of the striker motion. The numerically simulated impact force shows a good agreement with the experimental result and thus, the validity of the numerical model is proven. Based upon the proposed model, an optimization was performed to improve the impact force of the hammer drill. The objective function is to maximize the impact force and the used design variables are striker mass, frequency of piston, bit guide mass, cylindrical diameter and dimensions of the mechanism components. Each design variable and some other conditions that are essential to manitain normal operation of the hammer drill are considered as constraints. The optimized result show a remarkable improvement in impact force and an experimental proof was investigated.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.742-753
• /
• 2008

Currently an increasing number of urban tunnels with small overburden are excavated according to the principle of the New Austrian Tunneling Method (NATM). Therefore, a possibility of a tunnel collapse during excavation is getting higher in a proportionate manner. This paper will analyze causes the failure mechanism of a shallow NATM tunnel for different geological conditions, ground-water and invert solutions by investigation typical collapse site during tunnel construction. In this paper, this analysis performed two phase, firstly, the field investigation considering displacement measurement, ground-water level, geological characteristic, secondly, the numerical simulation considering the exist of invert construction and the effect of ground-water. It has been found that environmental factors such as state of underground water or construction sequences could influence failure mechanism of a shallow tunnel.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권7호
• /
• pp.2512-2531
• /
• 2014

We propose a new Distributed Denial of Service (DDoS) defense mechanism that protects http web servers from application-level DDoS attacks based on the two methodologies: whitelist-based admission control and busy period-based attack flow detection. The attack flow detection mechanism detects attach flows based on the symptom or stress at the server, since it is getting more difficult to identify bad flows only based on the incoming traffic patterns. The stress is measured by the time interval during which a given client makes the server busy, referred to as a client-induced server busy period (CSBP). We also need to protect the servers from a sudden surge of attack flows even before the malicious flows are identified by the attack flow detection mechanism. Thus, we use whitelist-based admission control mechanism additionally to control the load on the servers. We evaluate the performance of the proposed scheme via simulation and experiment. The simulation results show that our defense system can mitigate DDoS attacks effectively even under a large number of attack flows, on the order of thousands, and the experiment results show that our defense system deployed on a linux machine is sufficiently lightweight to handle packets arriving at a rate close to the link rate.

• 로봇학회논문지
• /
• 제9권2호
• /
• pp.124-131
• /
• 2014

The robot mechanisms that were previously researched had only been conducted for the purpose of overcoming the obstacles stably at low speed driving and enhancing the stability against high speed circuitous driving, and yet, the mechanism satisfying two purposes. However, in order to stably drive with high speed on rough terrain, there is a need for satisfying both of these purposes, as well as testing the efficiency of the mechanisms at high speed driving. There, this paper simulated some of the passive mechanisms and focused on checking the performances of passive mechanisms through simulations and analyzing each mechanism on the basis of an evaluation index. The simulation was conducted by Adams (The Multi-body Dynamics Simulation Solution) and used various types of passive mechanisms which were introduced in the robotics field. As a result, the study confirmed that passive mechanisms have a number of situations that affect the driving stability on each direction of roll and pitch. Further study is needed about active mechanism.

• 한국시뮬레이션학회논문지
• /
• 제15권4호
• /
• pp.79-86
• /
• 2006

수중과 같은 에러의 변동이 크고 무선 통신에 제약이 따르는 환경에서 데이터 전송을 실행하게 되는 경우에는 상당히 심각한 지연율과 에러 발생률을 고려하지 않을 수 없다. 따라서 이러한 환경에서 사용되는 메커니즘은 가능한 한 효율적이면서 간단해야만 한다. 본 논문에서 제안하는 Pervasive Block ACK(PBA) 기법은 각 프레임마다 전송되던 ACK를 Set 단위로 묶어서 한꺼번에 보내주는 방법으로, 수중 등 열악한 환경에서 ACK 전송으로 인해 발생하는 트래픽 발생빈도 감소를 위해 제안되었다. Pervasive Block ACK 기법은 전송 횟수를 최소로 줄임으로써 오버헤드를 감소시켜 네트워크의 효율성을 높여 지연율은 줄일 뿐만 아니라 그에 부가적으로 전력 소비 절감의 효과까지도 기대할 수 있다. 본 논문에서는 Numerical Result를 통하여 제안에 관한 효율성 및 연구 가치를 증명하였다.