분노는 심장질환, 가정폭력 등에 영향을 미치며 최근 분노를 조절하지 못해 발생한 각종 범죄에 대한 언론보도가 증가하고 있다. 분노는 심각한 사회문제와 사회적비용을 발생시키기 때문에 부적절한 분노대처문제 완화를 위한 적극적인 개입방법이 필요한 현실이다. 효과적 분노대처 개입의 대안 제시를 위해 인지정서행동 통합접근, 정신역학적 접근, 심리교육적 접근, 이완요법, 인지행동-예술치료기법, 스트레스 면역법 등 다양한 방법이 연구되고 활용되고 있다. 이러한 현실에서 정보통신 기술은 이를 위한 효과적인 수단으로 활용될 가능성이 있으며 관련 연구가 다양하게 진행되고 있다. 본 연구는 분노대처 능력을 향상시키기 위한 노력의 일환으로 ICT(Information & Communication Technology)기술을 활용한 분노대처 서비스기술의 개발을 목표로 하고 있다. 즉, 분노 상황을 인지하고 분노 대처를 보다 용이하게 할 수 있도록 위치기반 서비스를 제공하여 분노를 지연하고 주변을 환기시키는 기술개발을 목표로 하고 있다. 본 연구에서는 위치정보를 이용하여 분노 상황에 직접 개입하여 분노를 완화시키는 기술에 대한 것으로서 이를 위한 기반 기술에 대한 연구이다.
목적 경추 전산화단층촬영(cervical spine CT; 이하 C-spine CT)과 일반촬영을 이용하여 환추횡인대골화증(ossification of the transverse ligament of the atlas; 이하 OTLA)과 연관된 영상 소견에 대하여 알아보았다. 대상과 방법 11년간 3975명의 환자에게서 촬영한 5201개의 C-spine CT를 분석하여 OTLA의 유무를 확인하였고, 이를 대조군과 비교하여 그 빈도와 연관된 영상 소견의 통계학적 유의성을 확인하였다. 결과 3975명 중 45명에서 OTLA가 확인되었다(1.1%). 그 빈도는 나이에 따라 증가하는 소견을 보였으며(p < 0.005), 80세 이상인 환자의 12%에서 관찰되었다. 척수 공간(space available for spinal cord; 이하 SAC)은 OTLA 환자군에서 유의하게 작은 것으로 확인되었으며(p < 0.005), 전방환추후두막(anterior atlantooccipital membrane)-Barkow 인대 복합체의 광물질침착(mineralization), 황색인대골화증(ossification of ligamentum flavum), 경추후만증 또한 유의미한 양의 상관관계를 보였다(p < 0.005). 결론 OTLA는 환자의 나이, SAC 협소, 경추후만증, 다른 경추인대의 골화증과 연관되어 퇴행성 척추병증, 전신적인 골 과잉 상태, 혹은 기계적 스트레스나 불안정성에 관련이 있을 것으로 생각된다.
Chanyuan Liu;Jingyi Wang;Bowen Hou;Yitong Li;John N. Morelli;Peisen Zhang;Jun Ran;Xiaoming Li
Korean Journal of Radiology
/
제23권6호
/
pp.638-648
/
2022
Objective: The study aimed to investigate the diurnal variation in cervical disc hydration and its relationship with cervical degeneration. Materials and Methods: C3-C7 discs of 86 prospectively enrolled participants (37 males, 49 females; mean age ± standard deviation, 23.5 ± 2.5 years) were assessed using T2 mapping in the morning and evening. All discs were stratified by Miyazaki grade or C2-C7 Cobb angle and T2 values (T2). The degree of diurnal T2 variation (T2-DDV), defined as (morning T2 - evening T2)/morning T2 x 100%, was measured for the entire disc, annulus fibrosus (AF), nucleus pulposus (NP), and endplate zones. Results: T2 of the entire disc decreased significantly after the daytime load (p < 0.001), with a T2-DDV of 13.3% for all discs and 16.0%, 12.2%, and 13.0% for healthy (grade I), mild degenerative (grade II), and advanced degenerative (grade III/IV) discs, respectively. T2 of regional NPs and AFs decreased significantly from morning to evening (p ≤ 0.049) except in the healthy anterior inner AF (p = 0.092). Compared with healthy discs, mild degenerative discs displayed lower T2 and T2-DDV in regional NPs (p < 0.001). Advanced degenerative discs showed higher T2-DDV in the anterior inner AF compared with healthy discs (p = 0.050). Significant diurnal T2 changes in the endplate zones were observed only in healthy discs (p = 0.013). Cervical discs in the low Cobb angle group showed higher T2-DDV in the anterior AFs and anterior NP and lower T2-DDV in the posterior AF than those in the high Cobb angle group (p ≤ 0.041). Conclusion: This study characterized the diurnal variation in hydration of the cervical discs as assessed using T2 mapping and revealed early chemo-mechanical coupling dysfunction in degenerating discs. Cervical sagittal alignment on MRI can affect the diurnal stress patterns of the cervical discs. T2 mapping is sensitive to disc biomechanical dysfunction and offers translational potential from biomechanical research to clinical application.
Analyzing the collapse behavior of thin-walled steel structures holds significant importance in ensuring their safety and longevity. Geometric imperfections present on the surface of metal materials can diminish both the durability and mechanical integrity of steel shells. These imperfections, encompassing local geometric irregularities and deformations such as holes, cavities, notches, and cracks localized in specific regions of the shell surface, play a pivotal role in the assessment. They can induce stress concentration within the structure, thereby influencing its susceptibility to buckling. The intricate relationship between the buckling behavior of these structures and such imperfections is multifaceted, contingent upon a variety of factors. The buckling analysis of thin-walled steel shell structures, similar to other steel structures, commonly involves the determination of crucial material properties, including elastic modulus, shear modulus, tensile strength, and fracture toughness. An established method involves the emulation of distributed geometric imperfections, utilizing real test specimen data as a basis. This approach allows for the accurate representation and assessment of the diversity and distribution of imperfections encountered in real-world scenarios. Utilizing defect data obtained from actual test samples enhances the model's realism and applicability. The sizes and configurations of these defects are employed as inputs in the modeling process, aiding in the prediction of structural behavior. It's worth noting that there is a dearth of experimental studies addressing the influence of geometric defects on the buckling behavior of cylindrical steel shells. In this particular study, samples featuring geometric imperfections were subjected to experimental buckling tests. These same samples were also modeled using Finite Element Analysis (FEM), with results corroborating the experimental findings. Furthermore, the initial geometrical imperfections were measured using digital image correlation (DIC) techniques. In this way, the response of the test specimens can be estimated accurately by applying the initial imperfections to FE models. After validation of the test results with FEA, a numerical parametric study was conducted to develop more generalized design recommendations for the stainless-steel shell structures with the initial geometric imperfection. While the load-carrying capacity of samples with perfect surfaces was up to 140 kN, the load-carrying capacity of samples with 4 mm defects was around 130 kN. Likewise, while the load carrying capacity of samples with 10 mm defects was around 125 kN, the load carrying capacity of samples with 14 mm defects was measured around 120 kN.
본 연구는 시설재배에서 참외를 수확할 수 있는 로봇의 엔드이펙터를 개발하기 위한 전단계로서, 참외의 엔드이펙트 중에서 소프트 핸드링이 가능한 그립퍼와 참외줄기를 절단하는 커터를 설계하기 위해 참외의 기하학, 압축, 절단, 마찰 특성 등을 분석하였다. 그 결과 참외의 길이는 평균 108mm, 직경은 중간지점에서 평균 70mm, 중량은 평균 188g, 부피는 평균 333mL, 진원도는 평균 3.8mm로 나타났다. 참외의 중량(W)에 대하여 길이(L)와 직경(D2)을 변수로 하는 식 $W=L^a{\times}D_2^b$로부터 비선형 회귀분석을 실시한 결과 a는 2.0279, b는 -0.9998의 상수값을 가지는 상관관계가 있는 것으로 나타났다. 참외줄기의 지름은 평균 3.8mm이며, 참외 줄기는 중심으로부터 반경 5mm 범위 내에서 대부분 분포하였다. 참외의 항복치와 압축강도, 경도의 평균값은 각각 $36.5N/cm^2$, $185.7N/cm^2$, $636.7N/cm^2$이며, 참외 줄기의 절단력과 절단강도는 각각 $2.87{\times}10^{-2}N$와 $5.60N/cm^2$로 나타났다. 참외의 마찰계수는 고무가 0.609으로 가장 높게 나타났고, 그 다음으로 알루미늄이 0.393, 스테인레스강이 0.177, 테프론이 0.079로 나타났다. 분석된 자료를 토대로 엔드이펙터 설계시 동작에 따른 위치 오차와 안전율을 감안하여, 그립퍼의 및 커터의 크기, 선회반경, 설치위치, 구동모터의 동력, 재료 및 재질의 선정 등에 적용할 수 있을 것으로 판단되었다.
Polycarbonate/Acrylonitrile-Butadiene-Styrene(PC/ABS) 블렌드의 분해효과를 조사하기 위해 고전단 압출 성형기의 스크류 회전속도와 전단시간의 함수로 PC/ABS의 물성변화에 영향을 미치는 산화방지제의 효과를 연구하였다. 인산계 산화방지제로 Tris-(2,4-di-tert-butyl-phenyl phosphate) (이후 A1로 명명) and Bis(2,4-dicumylphenyl) pentaerythritol diphosphite(이후 A3로 명명)가 사용되었고, 페놀계 산화방지제는 Octadecyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl) propionate(이후 A2로 명명)가 사용되었다. 열적 물성은 TGA를 통해 측정되었고 고속 전단 가공 후 크게 감소하였다. 산화방지제 A3가 포함된 PC/ABS 블렌드는 다른 산화방지제에 비해 스트레스로 유발된 degradation과, 열적 degradation이 지연되었다. 고속 전단 가공 후 UTM을 사용한 기계적 물성 또한 산화방지제 종류에 따라 각각 감소하였고, 특히, 신율의 경우 크게 감소하는 거동이 나타난 것에 비해 인장강도의 변화는 매우 적었다. 스크류 회전속도 1000 rpm, 전단부하 시간 20초 조건에서의 신율로 예를 들면, 고속 전단 가공하기 전 신율인 148%에서 A1은 91.6%, A2는 63%, A3은 131%로 감소하였다. 형태학적 물성을 알기 위해 SEM을 사용하여 PC/ABS의 분산상을 조사하였고, 스크류 회전속도와 하중이 작용한 기간이 증가함에 따라 그 크기 분포가 감소하였다. 따라서, 세 종류 산화방지제 모두 고속 전단 가공에서 스트레스로 유발되는 PC/ABS 블렌드의 degradation을 억제하고, 그 효과는 A3가 가장 뛰어난 것을 확인하였다.
연구목적: 본 연구에서는 주조연결부의 하중 전달기전과 함께 연결강도를 증진시킬 수 있는 기계적 유지구 설계 방법을 주조연결한 3-unit 고정성 국소의치의 삼차원 유한요소 모형으로 응력분포를 비교 관찰하여 알아보고자 하였다. 연구 재료 및 방법: 10개의 유한요소 모형을 형성하였다. (모형 A: 1개의 유지구, 모형 B: 2개의 유지구, 모형 C: 3개의 유지구, 모형 D: 4개의 유지구, 모형 E: 1개의 수평구와 2개의 수직구, 모형 F: 2개의 수평구와 1개의 수직구, 모형 G: 크기가 증가된 1개의 유지구, 모형 H: 크기가 증가된 2개의 유지구, 모형 I: 높이가 증가된 1개의 유지구, 모형 J: 기저부 너비가 증가된 1개의 유지구). 하악 제 1대구치에서 이차 주조체 양측의 근심와와 원심와에 수직하중을 가하였다. 결과: 일차 주조체와 이차 주조체 간의 유지력과 유지구 형성 후에 남아 있는 일차 주조체 연결부의 두께가 주조연결부의 강도에 영향을 주는 주요소였다. 유 지구의 개수나 크기 증가에 따른 유지력 증가는 응력을 분산시키는 효과를 나타냈으나 경우에 따라서는 상대적으로 일차 주조체의 연결부 두께를 감소시켜 응력 값이 증가하는 결과를 초래하였으며, 주조연결부의 기계적 실패는 이차 주조체보다는 일차 주조체에서 일어날 가능성이 높았다. 결론: 주조연결을 위한 유지구 형성 시에는 일차 주조체 연결부의 잔존 금속 두께를 고려하여 유지구의 개수를 제한하고, 이와 함께 일차 주조체와 이차 주조체간의 유지력을 최대화하기 위하여 유지구의 기저면보다는 깊이를 증가시키는 유지구 설계가 바람직한 방법으로 생각된다.
기관밸브용접 SCr4-21-4N 및 SUH3-21-4N을 연구선정된 최적마찰압접조건 하에서 마찰압접을 하고 이때 생기는 압접부의 잔류응력 및 경도의 peak 등 압접결함의 제거 및 압접성능개선을 위한 열처리에 관하여 실험연구한 결과 다음과 같은 결론을 얻었다. (1) 배기 valve용강 SCr4-21-4N 및 SUH3-21-4N의 마찰압접을 위한 최적조건으로서 회전수 3,000rpm, 마찰가열압 p 하(1)=8 kg/mm 상(2), upset 압 p 하(2)=20 kg/mm 상(2), 압접가열시간 t 하(1)=3초, upset 시간 2.5초를 선정한 것이 매우 타당함이 실험적으로 입증되었다. (2) 이종재질 SUH3-SUH31, SCr4-SUH31, SCr4-SUH3, SUH3-CRK22, SCr4-21-4N 및 SUH3-21-4N의 마찰압접에 관한 저자의 종래 연구와 본연구 결과는 압접부의 압접 특성이 서로 매우 일치하였다. (3) SCr4-21-4N 및 SUH3-21-4N의 마찰압접부의 잔류응력 및 전도의 peak를 제거하기 위한 최적열처리조건은 $600^{\circ}C$$\times$30min.$\times$room air cooling의 normalizing임이 확인되었다. (4) 이때 열처리 후에는, 열처리전의 인장강도의 약 20%가 감소했으나, 파단 위치는 열영향부로부터 모재 SCr4 및 SUH3 측으로 이동하였다. (5) 상기 최적조건 하에서 마찰압접되고 열처리된 압접부의 현미경 조직검사 결과, 압접부가 매우 좁고 압접결함이 없으며, 치밀하고 조밀한 조직의 우수한 압접이었음이 확인되었다. (6) 상기 최적조건은, 기관 valve 생산을 위한 타이종재질의 마찰압접조건으로도 응용될 수 있을 것이다.
본 연구에서는 인체 골종양에서 유래한 G292세포를 이용하여 압력으로 세포막을 신장(stretch)시켰을 때 $K^+$통로의 전기적 찰성 변화를 연구하였다. 배양된 세포에서 유골전극을 이용하여 세포막 내측이 유리전극의 외부로 향하도록 inside-out patch를 얻어 단일이온통로전류를 막전압고정법 (patch clamp recording)으로 기록하였다. G292세포의 세포막 내외에 140 mM KCl 용액이 있는 상태에서 유리전극내 전압을 -80 mV로 고정했을 때 전도성이 $270\pm27\;pS,\;113\pm12\;pS,\;48\pm8\;pS$인 3가지 종류의 $K^+$통로를 관찰하였다. 전도성이 낮은 48 pS의 $K^+$통로는 모든 세포막에서 관찰하였으며 270 pS 및 113 pS의 $K^+$ 통로는 일부 세포에서만 관찰하였다. 48 pS의 $K^+$통로는 세포막 외측에 음의 전압을 가하면 활성화되고 양의 전압을 가하면 활성화되지 않는 외향성 정류특성을 보였다. 세포막 외측에 음압을 가하면 48 pS의 $K^+$통로는 활성화되었으며 이온 통로가 열리는 확률($P_{open}$)이 가하는 압력에 비례하여 증가하였다. 이러한 결과는 G292세포주에 3가지 종류의 $K^+$통로가 존재하며 전도성이 낮은 48 pS의 $K^+$통로만이 세포막 신장에 의하여 직접적으로 활성화되는 특성을 보였다. 이러한 $K^+$ 통로의 활성화는 세포가 기계적 자극을 받아 세포막이 신장되면 세포막전압을 과분극시키며 조골세포에서 기계적 감수기로서의 기능을 수행하여 조골세포의 골개조에 관여할 것으로 추측된다.순에서는 수술 후 잉여 연조직에 의한 두께의 증가가 나타나고 상순에서는 구륜근에 의한 장력에 의해 상순의 두께가 감소하였다가 보정 기간 후 새로운 악골 위치로 적응하는 것으로 생각된다.다. 5. II급고무줄과 수직고무줄 적용 시를 비교해 보면 수직고무줄 장착시 전치부 치근막에 인장력이 더 넓게, 그 크기는 더 작게 나타났다. 반면에 구치부 치근막에 나타나는 응력의 분포와 크기는 별 차이를 보이지 않았다. 5. 전치부 치근막 인장부위에서 인장력은 견치에서 제일 컸다.상적 제1대구치간 치열궁 폭경의 예측이 1 mm의 오차한계 이내로 예측된 경우는 Cha 들의 예측식이 $40\%$ 로 가장 높으며, Pont와 Schmuth의 예측식은 각각 $29\%$와 $13\%$ 이었다. 이상의 결과는 상악 절치의 근원심 폭경의 합으로부터 이상적 제1소구치간 치열궁 폭경 및 제1대구치간 치열궁 폭경을 예측하는 것은 임상적 신뢰성이 낮을 것임을 시사한다.교정력을 효과적으로 전체 치열로 전달할 수 있는 독특한 기계적 특성을 지니고 있는 것으로 생각된다..7. 구순 반흔 제거수술시기로는 4-6세군 ($27.5\%$), 6-8세군 ($19.6\%$), 2-4세군 ($13.7\%$)이 $60\%$이상을 차지하여 초등학교 취학 전에 구순의 반흔을 제거하려 함을 알 수 있었다. 8. 비변형 교정수술시기로는 0-2세군 ($7.1\%$), 2-4세군 ($14.3\%$), 4-6세군 ($21.4\%$), 6-8세군 ($14.3\%$)으로 초등학교 취학이전이 $57.1\%$로서 최근의 조기 치료경향을 반영하는 것으로 보인다.
In order to study the effect of sawdustboard combined with plastic chips, 0.5mm($T_1$), 1mm($T_2$), 1.4mm($T_3$) thick nylon fiber. polypropylene rope fiber(RP), and 0.23mm thick moth-proof polypropylene net fiber(NP) were cut into 0.5, 1, 2cm long plastic chips. Thereafter, sawdustboard combined with plastic chips prepared as the above and plastic non-combined sawdustboard(control) were manufactured into 3 types of one-, two-, and three layer with 5 or 10% combination level. By the discussions and results at this study, the significant conclusions of mechanical and physical properties were summarized as follows: 1. The MORs were shown in the order of 3 layer> 2 layer> 1 layer among plastic non-combined boards, and $T_3$ < $T_2$ < $T_1$ < RP (NP(5%) < NP(l0%) among plastic combined boards. In 2cm long plastic chip in 1 layer board, the highest strength through all the composition was recognized. 1 layer board showing the lower strength with 0.5cm plastic chip rendered to the bending strength improvement by 2 or 3 layer board composition. On the other hand, 2 or 3 layer combined with 1, 2cm long polypropylene net fiber chips incurred MOR's conspicuous decrease requiring optimum plastic chip combined level and consideration to combined type. 2. MOE in plastic non-combined 3 layer board exhibited sandwich construction effect by higher resin content application to surface layer in the order of 3layer>1layer>2layer with the highest stiffness of the board combined with polypropylene chip, while nylon chip-combined board had little difference from plastic non-combined board. In relevant to length and layer effect, 3 layer board combined with the 0.5cm long polypropylene net fiber chip in 5% and 10% combined level presented 34-43% and 44-76% stiffness increase against plastic non-combined board(control), respectively. Moreover, in 1 layer board, 30% stiffness increase with 10% against 5% combined level in the 1 and 2cm long polypropylene net fiber chip was obtained. 3. Stress at proportional limit(Spl) showing the fiber relationship (r: 0.81-0.97) between MOR presented in the order of 1 layer<2 layer<3 layer in plastic non-combined board. Correspondingly, combined effect by layer and plastic chip length was similar to MOR's. 4. Differently from previous properties(MOR, MOE, Spl). work to maximum load(Wml) of 2 layer board approached to that of 3 layer board. Conforming the above phenomenon. 2 layer combined with 0.5cm long polypropylene net fiber chip kept the greater work than 1 layer. The polypropylene combined board superior to nylon -and plastic non - combined board seemed to have greater anti - failing capacity. 5. Internal bond strength(IB), in contrast to MOR's tendency. showed in the order of T1
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.