• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2004.04a
• /
• pp.135-138
• /
• 2004

Conventional piezoelectric lead-zirconate-titanate (PZT) senor has high sensitivity, but it is very brittle. Recently polymer films such as polyvinylidene fluoride (PVDF) and poly(vinylidene fluoride­trifluoroethylene) (P(VDF-TrFE)) copolymer have been used as a sensor. The advantages of polymer sensor are the flexibility and mechanical toughness. Simple process and possible several shapes are also additional advantages. Polymer sensor can be directly embedded in a structure. In this study, nondestructive damage sensitivity of single basalt fiber/epoxy composites was investigated with sensor type and thermal damage using AE and oscilloscope. And AE waveform for epoxy matrix with various damage types was compared to each other. The damage sensitivity of two polymer sensors was rather lower than that of PZT sensor. The damage sensitivity of PVDF sensor did not decrease until thermal damage temperature at $80^{\circ}C$ and they decreased significantly at $110^{\circ}C$ However, the damage sensitivity of P(VDF-TrFE) sensor at $110^{\circ}C$ was almost same in no damage sensor. For both top and side impacts, the difference in arrival time increased with increasing internal and surface damage density of epoxy matrix.

• Korean Journal of Acupuncture
• /
• v.21 no.2
• /
• pp.47-67
• /
• 2004

Objectives : In the present study, the effect of Scolopendrid Water-Alcohol Extract (SWAE) applied to acupuncture point BL23 (Shinsu) on the neuropathic pain was examined. A common source of persistent pain in humans is the neuropathic pain. Anti-convulsant drugs are used to treat the neuropathic pain. In the oriental medicine, Scolopendrid was used for long time to treat convulsant syndrome and back pain, etc. Methods : On the bases of the Scolopendrid clinical application, the effect of SWAE applied to the acupuncture point was tested in the rat model of neuropathic pain. Neuropathic pain was induced by tight ligation of L5 spinal nerve. When rats developed pain behaviors, One hundred microliter of SWAE was applied into the ipsilateral BL23 point at a dose of 10 mg/ml under enflurane anesthesia. The foot withdraw latency of the hind limb was measured for an indicator of pain level after each manipulation. Results : SWAE injection increased the mechanical threshold of the foot in the rat model of neuropathic pain significantly for the duration of 4h, suggesting a partial alleviation of pain. SWAE applied to BL23 point produced a significant improvement of mechanical sensitivity of the foot lasting for at least 4h. However, neither contralateral BL23 point, ST25 (Chonchu) point, nor LR3 (Taechung) point produce as much increase of mechanical sensitivity as ipsilateral BL23 point. And, this increase of mechanical sensitivity was dose-dependent. The improvement of mechanical threshold was interpreted as an analgesic effect. In addition, the analgesic effect of Scolopendrid 4 mg/kg injection is equivalent to that of gabapentin 50 mg/kg injection. The relations between SWAE-induced analgesia and endogenous nitric oxide(NO), inducible NO synthase (iNOS)/neuronal NO synthase (nNOS) were also examined. Results were turned out that both NO production and nNOS/iNOS protein expression which are increased by nerve injury were suppressed by SWAE injection applied to BL23 point. Conclusions : The data suggest 1) that SWAE produces a potent analgesic effect on the neuropathic pain model in the rat and 2) that SWAE-induced analgesia modulate endogenous NO through the suppression of nNOS/iNOS protein expression.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.11
• /
• pp.1-8
• /
• 2021

In this study, the water resistance and mechanical properties of heat-treated polyvinyl alcohol (PVA)/cellulose nanocrystal (CNC) films were investigated. PVA is the most commonly used synthetic biodegradable polymers owing to its excellent properties. However, the water/moisture sensitivity and relatively poor mechanical properties of PVA limits its applications. Although heat treatment is a conventionally used method to improve the mechanical strength and water resistance of PVA, the effectiveness of this method is insufficient. Therefore, CNC was used to further improve the mechanical properties and water resistance of the heat-treated PVA film. PVA/CNC nanocomposites containing CNC contents of 0, 1, 3, 5, and 10 wt% were fabricated using solvent casting and subsequent heat treatment. The mechanical properties and water resistance of PVA/CNC films were significantly improved. The tensile strength and wet strength of the PVA/CNC film with a CNC content of 5 wt% (PVA/CNC 5%) were 184.5% and 136.0% higher than those of the untreated PVA, respectively. In addition, the water absorption and solubility of PVA/CNC 5% were 56.6% and 68.2% lower than those of the untreated PVA.

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.133.2-133.2
• /
• 2005

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.104.1-104.1
• /
• 2005

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.214.2-214.2
• /
• 2005

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.172.2-172.2
• /
• 2005

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.19.2-19.2
• /
• 2005

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.1
• /
• pp.53-63
• /
• 2016

Wheel dynamometers are used to measure dynamic load that is conveyed from the road to a vehicle while driving. In this paper, two types of six-component wheel dynamometers utilizing shear deformation and bending deformation were designed and evaluated. Prior to designing the shear and bending type wheel dynamometers, the shear and bending deformation behaviors of the basic structure of the wheel dynamometer itself were analyzed using finite element analysis. Strain analysis was performed repeatedly in order to obtain a similar output sensing strain for each load component. The design was modified with a bridge circuit in order to minimize coupling strain. The results indicated that the shear type dynamometer was expected to obtain stable characteristics due to uniform strain distribution while the bending type dynamometer was expected to obtain high-quality sensitivity performance due to consistent output sensitivity.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.1
• /
• pp.1-9
• /
• 2015

This paper presents a design method for optimizing the focused beam characteristics, which are mainly determined by the condenser lenses in a scanning electron microscopy (SEM) design. Sharply reducing the probe diameter of electron beams by focusing the condenser lens (i.e., the rate of condensation) is important because a small probe diameter results in high-performance demagnification. This study explored design parameters that contribute to increasing the SEM resolution efficiently using lens analysis and the ray tracing method. A sensitivity analysis was conducted based on those results to compare the effects of these parameters on beam focusing. The results of this analysis on the design parameters for the beam characteristics can be employed as basic key information for designing a column in SEM.