• 제목/요약/키워드: Mechanical obstruction

검색결과 88건 처리시간 0.032초

Chronic Intestinal Pseudo-Obstruction Caused by Intestinal Adenocarcinoma in a Mixed-Breed Dog

  • Moon, Heesup;Hong, Subin;Kim, Sangyeoun;Park, Sungguon;Kim, Taehwan;Kim, Nahyun;Lee, Jae-Hoon
    • 한국임상수의학회지
    • /
    • 제33권4호
    • /
    • pp.210-213
    • /
    • 2016
  • A 9-year-old, mixed-breed, castrated male dog presented with a one-week history of severe vomiting. Abdominal radiography showed a dilated small intestine loop. Abdominal ultrasonography showed small-intestine distension up to 5 cm in diameter without mechanical obstruction. During exploratory laparotomy, an aperistaltic ileal segment was resected. There was no narrowed cavity in the resected plane. Histopathologic and immunohistochemical findings confirmed visceral myopathy due to intestinal adenocarcinoma in the ileum and revealed partial destruction of the longitudinal and circular muscles with fibrosis. Chronic intestinal pseudo-obstruction caused by adenocarcinoma was diagnosed after considering the above investigative results.

Hemodynamics of a Connecting conduit Between the Left Ventricle and the Left Decending Coronary Artery

  • Shim, Eun-Bo;Sah, Jong-Yub
    • International Journal of Vascular Biomedical Engineering
    • /
    • 제1권2호
    • /
    • pp.20-29
    • /
    • 2003
  • A new treatment for coronary artery occlusive disease is being developed in which a shunt or conduit is placed directly connecting the left ventricle with the diseased artery at a point distal to the obstruction. To aid in assessing and optimizing its benefit, a computational model of the cardiovascular system was developed and used to explore various design conditions. Simulation results indicate that in complete LAD occlusion, flow can be returned to approximately 65% of normal if the conduit resistance is equal for forward and reverse flow, increasing to 80% in the limit in which backflow resistance is infinite. Increases in flow rate produced by asymmetric flow resistance are considerably enhanced in the case of a partial LAD obstruction since the primary effect of resistance asymmetry is to prevent leakage back into the ventricle("steal") during diastole. Increased arterial compliance has little effect on net flow with a symmetric shunt, but leads to considerable augmentation when the resistance is asymmetric. These results suggest that an LV-LAD conduit will be beneficial when stenosis resistance(Rst) > 27 PRU if resistance is symmetric.

  • PDF

Evaluation of Thermal Utilization of Dousing System in PHWR Nuclear Power Plant

  • Nam, S.D.;Ryu, J.I.
    • 한국분무공학회지
    • /
    • 제4권3호
    • /
    • pp.42-52
    • /
    • 1999
  • An effectiveness of thermal utilization of a dousing system in the 600 MW PHWR Nuclear Power Plant has been evaluated. The behavior and conditions of water droplet sprayed in a postulated accident conditions in containment configuration has been calculated. In this calculation, two pressure conditions with the consideration of obstruction area and containment wall effect has been established : one being the minimum containment pressure of 7 kPa(g) encountered for dousing shut off and the other being the containment design pressure 124 kPa(g). The results revealed that the effectiveness of the thermal utilization ranges from 93% to 97%. In the analysis on two cases without/with side wall effect in the containment building, the thermal utilization decreases with obstruction area from 89% to 85%, which satisfies the design criteria set for the containment pressure against the accident condition.

  • PDF

Type II Mirizzi 증후군 1례 (A CASE OF TYPE II7 MIRIZZI SYNDROME)

  • 김홍진;이주형;신명준;권굉보;장재천;정문관
    • Journal of Yeungnam Medical Science
    • /
    • 제7권2호
    • /
    • pp.197-202
    • /
    • 1990
  • 저자들은 최근 4일간의 우측 상복부 동통 및 경미한 황달을 주소로 내원한 71세 남자 환자에서 임상적으로 경피적 간담관조영술, 복부 초음파검사, 간기능 검사, 복강 동맥 조영술을 시행하여 Type II Mirizzi 증후군으로 진단된 1예를 치험하였기에 문헌고찰과 함께 보고하는 바이다.

  • PDF

신생아 위장관천공 (Neonatal Gastrointestinal Perforation)

  • 김성철;김인구
    • Advances in pediatric surgery
    • /
    • 제3권1호
    • /
    • pp.41-46
    • /
    • 1997
  • Perforation of the gastrointestinal tract in neonatal period has been associated with a grim prognosis. Recently there has been some improvement in survival. To evaluate the remaining pitfalls in management, 19 neonatal gastrointestinal perforation cases from May 1989 to July 1996 were analysed retrospectively. Seven patients were premature and low birth weight infants. Perforation was most common in the ileum(56.3%). Mechanical or functional obstruction distal to the perforation site was identified in 7 cases; Hirschsprung's disease 3, small bowel atresia 3, and anorectal malformation 1. These lesions were often not diagnosed until operation. Five cases of necrotizing enterocolitis and 1 of muscular defect were the other causes of perforation. In six cases, the cause of the perforation was not identified. Perinatal ischemic episodes were associated in five cases. Overall mortality was 15.1%. Because a considerable number of gastrointestinal perforations resulted from distal obstruction, pediatric surgeon should be alert for early identification and intervention of gastrointestinal obstruction, particularly in patients that are premature and have a history of ischemia.

  • PDF

Computational Study on the Hemodynamics of the Bypass Shunt Directly Connecting the left Ventricle to a Coronary Artery

  • Shim Eun Bo;Lee Byung Jun;Ko Hyung Jong
    • Journal of Mechanical Science and Technology
    • /
    • 제19권5호
    • /
    • pp.1158-1168
    • /
    • 2005
  • A shunt from the left ventricle to the left anterior descending artery is being developed for coronary artery occlusive disease, in which the shunt or conduit connects the the left ventricle (LV) with the diseased artery directly at a point distal to the obstruction. To aid in assessing and optimizing its benefit, a computational model of the cardiovascular system was developed and used to explore various design conditions. Computational fluid dynamic analysis for the shunt hemodynamics was also done using a commercial finite element package. Simulation results indicate that in complete left anterior descending artery (LAD) occlusion, flow can be returned to approximately 65% of normal, if the conduit resistance is equal for forward and reverse flow. The net coronary flow can increase to 80% when the backflow resistance is infinite. The increases in flow rate produced by asymmetric flow resistance are enhanced considerably for a partial LAD obstruction, since the primary effect of resistance asymmetry is to prevent leakage back into the ventricle during diastole. Increased arterial compliance has little effect on net flow with a symmetric shunt, but considerably augments it when the resistance is asymmetric. The computational results suggest that an LV-LAD conduit will be beneficial when the resistance due to artery stenosis exceeds 27 PRU, if the resistance is symmetric. Fluid dynamic simulations for the shunt flow show that a recirculating region generated near the junction of the coronary artery with the bypass shunt. The secondary flow is induced at the cutting plane perpendicular to the axis direction and it is in the attenuated of coronary artery.

St. Jude Medical 기계판의 임상적 연구 (Clinical Analysis of St. Jude Medical Valve Replacement)

  • 손영상
    • Journal of Chest Surgery
    • /
    • 제22권6호
    • /
    • pp.960-969
    • /
    • 1989
  • Results of St. Jude Medical valve replacement are presented in 171 patients who underwent operation from January 1983 through June 1989. The patients were 79 males and 92 females with ages ranging from 12 to 71 years. Total 211 of St. Jude Medical valves were implanted: 148 in mitral position, 57 in aortic position, 6 in tricuspid position. The follow-up was from 2 to 76 months with a cumulative period of 375 patient-year. The actuarial survival at 1 year, 3 year and 5 year were 92.1 %, 87.6 % and 86.3% respectively. The linearlized incidences of valve failure, thromboembolism, thrombotic obstruction, anticoagulation related hemorrhage and all valve related complication were as follows: 0.5 %/pt-yr, 0.5 %/pt-yr, 0.5 %/pt-yr, 1.1 %/pt-yr, and 2.4 %/pt-yr, respectively. The performance of the St. Jude Medical valve compares most favorably with other artificial valves. But it remains still hazards of mechanical prostheses such as thromboembolism and thrombotic obstruction.

  • PDF

선천성 장관폐쇄의 방사선학적 분석 (Radiologic Analysis of Congenital Origin Intestinal Obstruction in Neonate and Childhood)

  • 황미수;변우목;김선용;장재천
    • Journal of Yeungnam Medical Science
    • /
    • 제4권1호
    • /
    • pp.33-42
    • /
    • 1987
  • 1983년 5월부터 1987년 6월까지 영남대학교 영남의료원에서 선천성 장관폐쇄증으로 내원한 25예를 대상으로 각각의 임상소견 및 방사선학적 소견을 분석하여 다음과 같은 결과를 얻었다. 1. 비후성유문협착증 6예, 중장이상회전증 4예, 선천성 거대결장 8예, 쇄항 5예, 십이지장폐쇄증 및 회장폐쇄증이 각각 1예였다. 2. 남여비는 16:9였으며, 특히 비후성유문부협착증은 6예중 5예가 남아였다. 3. 비후성유문부협착증은 전예에서 상부위장관조영에서 특징적인 String sign 및 beak sign, shoulder sign 등을 나타냈다. 4. 1예의 십이지장폐쇄증은 double bubble sign을 보였고, 회장폐쇄증은 단순복부 사진상 폐쇄성소장공기팽창과 대장조영술에서는 microcolon을 나타내었다. 5. 4예의 중장이상회전증에서는 대장조영술상 맹장이 우측 상복부에 있었으며 2예는 Ladd's band에 의한 십이지장폐쇄를 보였다. 6. 선천성거대결장은 8예가 전부가 직장 및 하부 S자결장에 국한되어 나타났으며, 1예에서는 장염을 동반하였다. 7. 쇄항은 5예중 3예가 low type, 2예가 high type였고, 4예에서 회음부 및 비뇨생식기에 루관을 형성하였다. 위와 같은 결과와 함께 각각의 발생학적 기전과 방사선학적 소견의 문헌 고찰을 통하여 보다 신속하고 정확한 진단을 내리는데 도움을 주고자 하였다.

  • PDF

말기 암 환자의 장폐색성 복통에 대한 침구 및 족삼리 전침 치험 2례 (Acupuncture, ST-36 Electroacupuncture and Moxa Treatment of Abdominal Pain due to Bowel Obstruction in Cancer Patients : Case Report)

  • 김소연;최준용;박성하;권정남;이인;홍진우;한창우
    • 동의생리병리학회지
    • /
    • 제28권2호
    • /
    • pp.238-242
    • /
    • 2014
  • Here we described 2 cancer patients treated by acupuncture for abdominal pain as a complication of bowel obstruction. The patient 1, 43-year-old man was treated with surgery, radiotherapy and chemotherapy for rectal cancer. Two years after surgery, he complained of acute abdominal pain due to small bowel adhesion band. Bowel obstruction and symptoms were not improved by conservative therapy like as fasting, keeping Levin tube, and fluid therapy. 4 months later, he could eat a little rice water, but ileus and abdominal pain persisted despite of applying opiod drug and patch. Got started on acupuncture, electroacupuncture(ST-36) and moxa treatment, pain was relived gradually. He could stop opioids 1 month later and ileus was improved after acupuncture therapy for 2 months. The patient 2, 65-year-old woman got hepatectomy, cholecystectomy, and chemotherapy with cholangiocarcinoma. 6 months after surgery, she got laparotomy again for biopsy of new mass around ascending colon. She started eating after gas passing, but felt abdominal distension. Diffuse paralytic ileus was diagnosed by abdominal X-ray, and she got started conservative therapy. During ST-36 electroacupuncture therapy, symptoms like abdominal pain and distension were improved and could stop opiod patch. But eating aggravated ileus again and clinical finding of mechanical bowel obstruction was appeared. Based on these cases, acupuncture and moxa therapy could be helpful for improving abdominal pain and ileus, but possibility of malignant bowel obstruction should be considered especially in cancer patients.

STS304잘삭시 Chip Breaker를 이용한 Chip제어에 관한 연구 (A Study on the Chip Control in Machining STS304 Using a Chip Breaker)

  • Yeom, D.W.;Yu, K.H.;Seo, N.S.
    • 한국정밀공학회지
    • /
    • 제11권6호
    • /
    • pp.42-49
    • /
    • 1994
  • One of the parameters that influence the productivity of every industry, involved in metal cutting, is the chip from ; continuous or broken chip. Chip form varies according to machining conditions, material used, tool geometry and chip breaker geometry. Therefore, in this study we carried out the experiment on the chip control in machining STS304 using an attached obstruction type chip breaker. Namely, with the change of a chip breaker distance, chip breaker angle, cutting characteristics in machining STS304 which is well-known as a machining difficult material and produces a saw-toothed chip. The results of the experiment are as follows : 1. The chip breaker distance and angle under which the preferred chip is produced, show 1.5mm and 60 .deg. , while chip breaker angle in machining an ordinary steel was well-known 45 .deg. . 2. During the cutting process, the change of feed than the change of velocity was applied as cutting conditions, effects more clearly on the chip breaking. 3. Considering a whole surface roughness, it is not advisable to apply chip breaker mentioned above for precision cutting.

  • PDF