• Advances in aircraft and spacecraft science
• /
• 제5권2호
• /
• pp.277-294
• /
• 2018

In the space industry, structures undergo several vibration and acoustic tests in order to verify their design and give confidence that they will survive the launch and other critical in-orbit dynamic scenarios. At component level, vibration tests are conducted with the aim to reach local or global interface loads without exceeding the design loads. So, it is often necessary to control and limit the input based on a load criterion. This means the test engineer should be able to assess the interface loads, even when load cannot be measured. This paper presents various approaches to evaluate interface loads using measured accelerations and by referring to mass operators. Various methods, from curve fitting techniques to finite element-based methods are presented. The methods are compared using signals with known imperfection to identify strengths and weaknesses of each mass operator definition.

• 기술사
• /
• 제15권1호
• /
• pp.7-13
• /
• 1982

지하통신용 케이블 보호용 관로로 사용되는 합성수지관의 안전수행문제는 점차 중요성이 인식되어지고 있어 이를 검토하기 위하여 유형별에 의한 역학적 실험을 실시하였다. 그 결과 본 연구에서는 매설 파이프가 받는 토압과 수압을 실험치와 이론치로 서로 비교하여 보았고 매설깊이 별에 의한 총압력을 계산하여 적정한 매설 보건을 추정하였으며 또한 재료 특성을 파악하여 충격효과 및 변형에 대한 두께와의 관계를 알았다.

• 대한기계학회논문집A
• /
• 제28권1호
• /
• pp.92-99
• /
• 2004

With the advent of computers, CAD systems are widely used for various design practice. Complexity of CAD systems and difficulty of exchanging data among different CAD systems, however, do not allow efficient use as desired. In addition, to follow variety of designers' need, CAD activities should be customized. This article proposed a methodology fer developing an intelligent CAD system and the sate-of-the-art technologies described fur customizing CAD systems using API (Application Programming Interface). A basic platform is proposed and a useful application system is implemented to enable a parametric design by directly inputting numerical values on a CAD model. Based on this application, we developed a system that makes it possible to share part family data between SolidEdge and Pro/Engineer. The proposed concept on intelligent CAD systems facilitates integration of external systems such as CAE tools and promotes the use of CAD for both engineering designers and analysts.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권2호
• /
• pp.361-366
• /
• 2004

The die casting process was used to manufacture an automotive alternator housing. Generally automobile parts are required to be light and have high strength. The control of casting defects is important but has usually been depended only on the experience of the foundry engineer. Therefore simulations have been carried out on the die casting process of alternator housing. In this paper. we investigated the characteristics of the die casted alternator housing with the HPDC(High Pressure Die Casting) process. We presented the results of filling behavior and solidification process of the cast, The analysis results obtained from the filling behavior and solidification of cast agreed with test results.

• 대한안전경영과학회지
• /
• 제10권4호
• /
• pp.337-342
• /
• 2008

This paper investigates the optimal nesting system for a board. A hybrid method is used to search the optimal solution for rectangular nesting problem. This method is composed of heuristic approach algorithm. An engineer's experience of board nesting in which a loss occurred to sheet because of various individual error and diffidence. So, item layout at resource sheet were evaluated in engineering algorithm logic in which specially designed was installed. The nesting system consists of Lisp and Visual Basic. The system was controlled by AutoCAD so as to best item batch path test.

• 대한기계학회논문집A
• /
• 제29권1호
• /
• pp.45-52
• /
• 2005

A general approximate optimization technique by sequential design domain(SDD) did not save response values for getting an approximate function in each step. It has a disadvantage at aspect of an expense. In this paper, previous response values are recycled for constructing an approximate function. For this reason, approximation function is more accurate. Accordingly, even if we did not determine move limit, a system is converged to the optimal design. Size and shape optimization using approximate optimization technique is carried out with SDD. Algorithm executing Pro/Engineer and ANSYS are automatically adopted in the approximate optimization program by SDD. Convergence criterion is defined such that optimal point must be located within SDD during the three steps. The PLBA(Pshenichny-Lim-Belegundu-Arora) algorithm is used to solve approximate optimization problems. This algorithm uses the second-order information in the direction finding problem and uses the active set strategy.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제11권1호
• /
• pp.17-23
• /
• 2003

A design procedure for cooling towers was set up using the Merkel theory In the past, the design data could be different depending on the characteristic curve that the engineer adopted. Therefore, consistent and reasonable criteria are required, which are based on the exact information of the cooling tower performance. In this study, analysis program for both the design and off-design for a counterflow-type cooling tower was developed and verified by comparing with experimental data. The off-design performance with various operating conditions was analyzed, as well.

• Advances in nano research
• /
• 제14권5호
• /
• pp.451-461
• /
• 2023

Two-dimensional (2D) materials have been attracting attention since graphene monolayer was firstly separated. However, after an explosive boom, there is always quandary and stagnancy following and soon will come the refractory period of capital market. To avoid that undesired future, a paradigm of quasi 2D monolayer has been contemplated and devised in this article, with examples studied theoretically. The results show the general dynamic nonlinearity, and the expected tunability of bandgap without extra doping or substitution. These together suggest its intriguing both electronical and mechanical properties, which will enrich the arsenal of potential 2D materials.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.714-719
• /
• 2000

In this paper, an application program is made to simulate the behavior of a ship block under various crane works and to generate data of lu9 reactions and wire tensions. The program is based on a CAD program, Pro/ENGINEER. A ship is composed of more than 100 ship blocks. In order to lift, move, turn, or put a ship block at a convenient location fur assembling, workers in a shipyard use cranes, wires, and lugs temporarily attached to the block. In the procedure of lifting and turning a ship block with a crane, it is important to find suitable lug points and wires to do the handling efficiently and prevent accidents. Evaluation of forces in lugs and wires is necessary, but the problem is rather complex due to nonlinearity and nonuniqueness. In the present development, the nonlinear system of equations for quasi-static equilibriums is derived and a Newton type solution method is adopted to solve the system. The importance of initial estimates to the solution is illustrated and two approaches are utilized and compared. With the program developed, users can assign lug points on the CAD model by mouse and choose various linking devices at each crane point. Users can try to simulate the motion for any prescribed conditions, compare the motion of the block and the reactions and choose appropriate lug points and the type of wires and lugs.

• Journal of Electrical Engineering and Technology
• /
• 제9권1호
• /
• pp.324-333
• /
• 2014

In this study, physiological status of locomotive engineers were measured through EEG, ECG, EDA, PPG and respiration signals from 6 subjects to evaluate their arousal status during train operating. Existence of tunnels and mechanical vibration of train using 3-axes acceleration sensors were recorded simultaneously and were correlated with operator's physiological status. As the result of the analyzed subjects' physiological signals, mean SCR was increased in the section where more body movement is required. The RR interval was decreased before and after train stop due to the higher level of mental tension. The intensity of beta wave of EEG was found to be higher before and after train stop and tunnel section due to the increased mental arousal and tension. Therefore, it is expected that the outcomes of the physiological signals explored in this study can be utilized as the quantitative assessment methods for the arousal status to be used for sleepiness prevention system for vehicles operators which can greatly contribute to public transportation system safety.