• Journal of Korean Academy of Nursing
• /
• v.23 no.4
• /
• pp.664-677
• /
• 1993

The purpose of this study was to provide basic data for the development of educational material in Korean for patient3 being discharge after open heart surgery. The subjects were 45 adult patients who were seen in the out -patient department of the thoracic surgery unit of P University hospital between February 1993 and May 1993. The data were collected through a chart review and interview. Nursing needs, and the patients status related to diet, activity, medication, physical and psychoemotional limitations were analyzed. The results are summarized as follows ; 1. Mitral valve replacement was the most frequent type of surgery(91.2%). In most cases, a mechanical valve was used (91.0%) . The duration of admission after the operation was two to four weeks for most of the patients(48.9%). The follow-up period was between one and two years for 28.9% of the patients and below 6 years for all of the patients. 2. Many Patients didn’t know the importance of a low salt diet(57.8%), and did not get any education on low salt diet (66.7%). Gimchi was included as one of the most commonly ingested foods (77.8%). All of the patients indicated nursing needs related to education about low salt diets and further they indicated a major interest in foods that are harmful (57.7%) or foods that are safe(51.1% ). 3. Most patients did not recognize the need for limitations on physical activity(84.4%). Further, 31.1％ of them could not return to work at the time of the study. All patients had nursing needs related to physical activity, with the most frequent questions being about the permissble degree of activity and special cautions dictated by their illness (60.0%). 4. Many patients were ignorant of the necessity of medication(55.6%) . Forty percent of the patients were taking additional drugs, usually herb drugs. The time and duration of medication and the side effects of drugs were common concerns (57.7%) related to nursing. needs about medication and were mentioned by all of the patients. 5. All of the patients complained of physical discomfort including the following : memory disturbance(62.2%), weight gain(60.0%), chest tightness (55.6%), hair loss(51.1%), sleep disturbance(46.7%) and other symptoms in that order of frequency. Nursing needs related to physical condition were a concern for all of them. The viability and function of the replaced valve(53.3%) and weight gain(60.0%) were mal or concerns. 6. Looking at their psychoemotional condition it was found that 36 patients(80.0%) were emotionally unstable. The causes were physical discomfort(17 patients), insufficient knowlege of open heart surgery(6 patients), fear of death(6 patients), familial over protection(2 patients ) and lack of support (5 patients).

• Applied Chemistry for Engineering
• /
• v.24 no.5
• /
• pp.443-455
• /
• 2013

Electrochemical studies on charge transfer reactions across the interface between two immiscible electrolyte solutions (ITIES) have greatly attracted researcher's attentions due to their wide applicability in research fields such as ion sensing and biosensing, modeling of biomembranes, pharmacokinetics, phase-transfer catalysis, fuel generation and solar energy conversion. In particular, there have been extensive efforts made on developing sensing platforms for ionic species and biomolecules via gelifying one of the liquid phases to improve mechanical stability in addition to creating microscale interfaces to reduce ohmic loss. In this review, we will mainly discuss on the basic principles, applications and future aspects of various sensing platforms utilizing ion transfer reactions across the ITIES. The ITIES is classified into four types : (i) a conventional liquid/liquid interface, (ii) a micropipette supported liquid/liquid interface, (iii) a single microhole or an array of microholes supported liquid/ liquid interface on a thin polymer film, and (iv) a microhole array liquid/liquid interface on a silicon membrane. Research efforts on developing ion selective sensors for water pollutants as well as biomolecule sensors will be highlighted based on the use of direct and assisted ion transfer reactions across these different ITIES configurations.

• Journal of the Ergonomics Society of Korea
• /
• v.36 no.3
• /
• pp.169-181
• /
• 2017

Objective: The aim of this study was to explore the influence of outdoor weather conditions on subjective responses during physical activity. Background: The largest difference between indoor and outdoor conditions is the existence of the sun. The heat load from the sun has an influence on the heat gain of the human body and the intense degree of solar radiation affected thermal comfort. Method: Thirty eight people were exposed to a range of climatic conditions in the UK. Weather in England does not have extremely hot and cold temperature, and the current study was conducted under warm (summer and autumn) and cool (spring and summer) climates. Measurements of the climate included air temperature, radiant temperature (including solar load), humidity and wind around the subjects. Subjective responses were taken and physiological measurements included internal body temperature, heart rate and sweat loss. Results: This study was conducted under four kinds of environmental conditions and the environmental measurement was performed in September, December, March, and June. The values for sensation, comfort, preference, and pleasantness about four conditions were from 'neutral' to 'warm', from 'not uncomfortable' to 'slightly comfortable', from 'slightly cooler' to 'slightly warmer', and from 'neither pleasant nor unpleasant' and 'slightly unpleasant', respectively. All subjective responses showed differences depending on air temperature and wind speed, and had correlations with air temperature and wind speed (p<0.05). However, subjective responses showed no differences depending on the radiant temperature. The combined effects of environmental parameters were showed on some subjective responses. The combined effects of air temperature and radiant temperature on thermal sensation and pleasantness were significant. The combined effects of metabolic rate with air temperature, wind speed and solar radiation respectively have influences on some subjective responses. In the case of the relationships among subjective responses, thermal sensation had significant correlations with all subjective responses. The largest relationship was shown between preference and thermal sensation but acceptance showed the lowest relationship with the other subjective responses. Conclusion: The ranges of air temperature, radiant temperature, wind speed and solar radiation were $6.7^{\circ}C$ to $24.7^{\circ}C$, $17.9^{\circ}C$ to $56.6^{\circ}C$, $0.84ms^{-1}$ to $2.4ms^{-1}$, and $123Wm^{-2}$ to $876Wm^{-2}$ respectively. Each of air temperature and wind speed had significant relationships with subjective responses. The combined effects of environmental parameters on subjective responses were shown. Each radiant temperature and solar radiation did not show any relationships with subjective responses but the combinations of each radiant temperature and solar radiation with other environmental parameters had influences on subjective responses. The combinations of metabolic rate with air temperature, wind speed and solar radiation respectively have influences on subjective responses although metabolic rate alone hardly made influences on them. There were also significant relationships among subjective responses, and pleasantness generally showed relatively high relationships with comfort, preference, acceptance and satisfaction. Application: Subjective responses might be utilized to predict thermal stress of human and the application products reflecting human subjective responses might apply to the different fields such as fashion technology, wearable devices, and environmental design considering human's response etc.

• Food Science and Preservation
• /
• v.13 no.4
• /
• pp.438-444
• /
• 2006

This study was carried out to obtain fundamental data such as peeling efficiency and quality of potatoes and sweet potatoes peeled by hand, machine and alkali(NaOH). The weight loss by peeling was influenced by peeling methods. Weight losses by rotational brushing-type peeler showed the lowest value, 7.9% in potato, and 7.3% in sweet potato. Any significant differences in moisture content were not found in potatoes and sweet potatoes by peeling methods. The pH of potatoes and sweet potatoes just after peeling were 5.8-6.8 and 6.23-6.63, and decreased somewhat until 3 hrs after peeling. Hardness of potatoes and sweet potatoes peeled by hand with fruit knife were better than that of others. Depending upon the peeling method used the color and color differences undergo some changes in their color and browning. Color difference value of peeled potatoes by hand with a technical tools, and by mechanical peeler such as rotational cutting-type peeler and rotational brushing-type peeler showed just slightly. In particular, changes of rotor differences value of potatoes and sweet potatoes peeled by dipping with 10% NaOH solution at $100^{\circ}C$ was the highest in the samples peeled by NaOH.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.207-207
• /
• 2017

The proso millet is vulnerable to lodging due to high plant height and shallow root. A lodging results in a hard mechanical harvesting and yield loss. One of solutions on this problem is inhibition of internode elongation. The objective of this study was to set up use time and dose of prohexadium-calcium, is growth inhibitor. The experimental variety was Ibaekchal. The experiment design was a split-plot design with three replications. The treatments were as follow: Main-plots were 25 and 35 day after sowing(DAS) as use time and sub-plots were 0%, 50%, 100%(diluted solution of 1000 times, $1000{\ell}\;ha^{-1}$), 150% as dose. The amount of nitrogen, phosphate and potassium fertilization were 90, 70, $80kg\;ha^{-1}$, respectively. The size of high ridge and plant spacing were $90{\times}30cm$ and $60{\times}15cm$, respectively. Proso millet was sown on June 9, 2016 by hands and was adjusted at 2 plant per hill. The growth survey of vegetative growth stage was conducted at 1 day before treatment and with one week interval after treatment. Data were collected: (1) grain yield: weight of grain in $kg\;ha^{-1}$, (2) 1000 grain weight: average weight of 1000 grain, (3) plant height: distance from soil to top of panicle or leaf in cm, (4) ear length: distance from top of stem to top of ear in cm, (5) stem diameter: diameter of second internode (6) degree of lodging: percentage of lodging area, etc. Analyses of variance were performed using R version 3.3.1(https://www. r- project. org). The Duncan's multiple range test(DMR) was used to separate treatment means at P < 0.05. There was a significant difference in plant height and number of stem among the use time and dose of prohexadium-calcium during vegetative growth stage. At 25 DAS, the difference with no treatment increased until 25 day after treatment and decreased since then. The difference in number of stem increased until 18 day and decreased since 25 day. At 35 DAS, the difference with no treatment in plant height and number of stem increased until 22 day after treatment and decreased since then. We assumed that the effect of prohexadium-calcium was inhibition of internode elongation and promotion of tillering, continued untel 25day after treatment. At 25 DAS, the degree of lodging deceased to 100%, 30%, 10% and 0% as dose increased. At 35 DAS, the degree of lodging decreased to 100%, 20%, 0% and 0% as dose increased. At 25 DAS, the yield was 2910, 2710, 3190, $2310kg\;ha^{-1}$ among dose. At 35 DAS, the yield was 2750, 2630, 2220, $2050kg\;ha^{-1}$. We recommend that the optimum use time and dose of prohexadium-calcium for proso millet is 1000 times diluted solution of $1000{\ell}$ per ha at 25 day after sowing.

• International Journal of Highway Engineering
• /
• v.3 no.4 s.10
• /
• pp.93-103
• /
• 2001

This study focused on the field applicability evaluation of SB latex-modified concrete (LMC) for concrete bridge deck overlay using mobile mixer. The main experimental factors were water-cement ratio(31, 33, 35 37%), latex contents(0, 5, 10, 15, 20%), and fine aggregate ratio(55, 56, 57, 58%) in order to evaluate the workability, mechanical properties, and durability property of LMC. The slump loss, air content, compressive and flexible strength tests were used to evaluate LMC workability and strength properties. Also, the rapid chloride permeability test was used to evaluate the relative permeability of LMC. As a results, the LMC with enough workability and good quality was produced when it was mixed in field using mobile mixer, satisfying the target compressive strength and flexural strength. The required water-cement ratio of LMC for same workability when mixing with mobile mixer was less than that when mixing in laboratory. Increasing the amount of latex produced concrete with increased flexural strength by mobile mixer. The required cement-water ratios for same initial $19{\pm}3cm$ slump were 37% and 33% at laboratory and mobile mixer, respectively. The mobile mixer was accurately calibrated satisfying the required specification.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.3
• /
• pp.311-316
• /
• 2008

Calcium phosphate cement (CPC) has been used as bone substitute successfully due to good biocompatibility and osteoconductivity. One of the important mechanical characteristics of CPC is flowablility, which can be evaluated by measuring rheological parameters. However, there have been few studies that measured rheological properties of CPC. The purpose of this study was to evaluate the rheological properties of CPC paste mixed with 2 kinds of setting solutions, 2% hydroxyprophyl methylcellulose (HPMC) and 35% polyacrylic acid (PAA). The CPC used was dicalcium phosphate dihydrate (DCPD). Rheological properties of CPC paste were measured using rheometer. The statistical analysis was carried out with Mann-whitney test with Bonferronis collection. CPC with both setting solutions showed shear thinning behavior. CPC with 2% HPMC showed signigicantly higher complex viscosity than CPC with 35% PAA(p<0.05).

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.1
• /
• pp.71-77
• /
• 2013

Aluminium powder as reductant in aluminothermy process needs a fine particle size under 200 mesh, but it is not easy economically to make that because of its high ductility and powder production cost. In order to reduce the production cost of fine aluminum powder as reductant of $Mn_3O_4$ waste dust, therefore, the properties of aluminium alloy powder were investigated. Aluminium alloy ingot containing large amount of manganese can be crushed easily because of its intermetallic compounds having brittle properties. The manganese is also main element in ferro-manganese. We can obtain economically Al-15%Mn alloy powder by mechanical comminution process. And the result of thermite reaction using Al-15% Mn alloy powder instead of pure Al powder showed the fact that can be obtained the ferro-manganese which have a high purity in case of using pure aluminium powder as reductant. The recovery of manganese from $Mn_3O_4$ waste dust with Al-15%Mn alloy powder was higher level of about 70% than about 65% in case of using aluminium powder, that is due to lower spatter loss.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.1 no.1
• /
• pp.49-57
• /
• 2013

Recently, recycling of industrial by-products and CO2 reduction have been important issues in the world. In this reason, applications and reuse of Fly ash as a binder for concrete, which is generated in thermoelectric power plant, have been one of the effective recycle methods. In order for Fly ash to be applied to concrete, Korean Standard(KS) has selected and managed quality such as $SiO_2$, fineness, specific gravity, ignition loss and activity index. However, there is a limits for activity index, whose test period required is at least 28 days or 91 days. Activity index is the critical indication standard to determine mechanical strength of concrete that contained Fly ash. To complement the disadvantage of test method, this research provided "API test method", which quickly measure Pozzolanic reaction of Fly ash can be considered as a alternative of activity index. Then, the adaptable API test method need to be investigated through comparative analysis with the test result of API, activity index and K-value. The test method can make evaluation of Fly ash quality faster and more accurate. As a result, most Fly ash produced in Korea has not been satisfied in the KS quality standard except water content and specific gravity, and especially fluidized bed boiler ash has its characteristics. Also, API, activity index and K-value have superior interrelationship. The interrelationship between API and activity index and K-value gets increased as the material age gets higher, so API test can be considered as very useful test method for Pozzolanic reaction evaluation of Fly ash.

• Journal of Sensor Science and Technology
• /
• v.9 no.6
• /
• pp.404-415
• /
• 2000

This paper describes several performances and nondestructive inspection for deterioration due to forest fires in overhead transmission lines. After discussing corrosion mechanism such as atmospheric and galvanic corrosion for aged ACSR conductors and its detection for them are presented. Through impedance analysis of a solenoid coil, it is shown that the eddy current sensor may be available to inspect severe fault or local corrosion. As the solenoid coil changes its impedance when the test conductor is inserted into the coil, it can be possible to measure deterioration degree caused by forest fires. Tensile strength, extension rate and sensor impedance are tested for some samples degraded by artificial fire. As increasing blazed period to some extent, the strength of aluminum strand begins to be reduced remarkably, while galvanized steel strand holds the similar strength to the initial value, despite of appearing a little loss of zinc layer. In general, it is shown that the sensor impedance would be increased while the tension load of conductor is reduced and the extension rate is contrarily increased. Therefore, the sensor output could exhibit the changes of mechanical performances, and would be used to detect such deterioration caused by forest fire in ACSR conductors built on the ridge of mountains. Finally, it was verified that the solenoid coil could be applicable to obtain any crucial inform for serious deterioration due to forest fires.