• 한국안전학회지
• /
• 제16권3호
• /
• pp.61-67
• /
• 2001

In this study the electrical and mechanical characteristics of PET films ore analyzed after plasma surface treatment. After plasma treatment, the surface potential decay, surface potential and dielectric property were evaluated to analyze the electrical insulating property, and the tensile strength was measured as the mechanical characteristic. When plasma treatment was conducted for less than 10 minutes, it was found that the electrical insulating property was improved through evaporation of low molecular weight materials md cleaning of surface. However, for more than 10 minutes, the insulating property of plasma treated PET films was decreased due to excessive discharge energy. The tensile strength was hardly changed by Plasma treatment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1144-1146
• /
• 2005

This paper presents the optimal design reducing the rotor inertia in order to improve the driving characteristic of BLDCM for robots. The parallel Genetic Algorithm is performed to rotor inertia minimization in optimal design. Also, velocity profile with finite jerk method is introduced to reduce vibration of BLDCM. As a result, a torque characteristic is same although rotor inertia is reduced 2/3 compared with prototype model. And, maximum vibration value is reduced by 63.4[%1 according to apply finite jerk.

• 드라이브 ㆍ 컨트롤
• /
• 제10권3호
• /
• pp.27-33
• /
• 2013

Solenoid valve has used in various industrial field extensively. A solenoid valve has different size, shape and method of operation accordantly to industrial field. Many researchers study on kinds of solenoid valve such as flow rate, dynamic, magnetic field, valve shape and operating method. But the flow rate characteristic and dynamic response time performance on the diaphragm valve are not studied. This paper describes the flow rate characteristic and dynamic response time performance on the diaphragm valve. At first, the diaphragm valve is simulated in AMESim simulation tool. AMESim model found that an effect of valve performance depends on parameter. The parameter is the diaphragm orifice area. And the performance test bench confirms the effect in this parameter. Finally, it finds out the flow rate characteristic and dynamic response time performance on the diaphragm valve.

• 한국자동차공학회논문집
• /
• 제13권1호
• /
• pp.119-125
• /
• 2005

The current automotive is seeking the improvement of performance, the prevention of environmental pollution and the saving of energy resources according to miniaturization and lightweight of the components. And the variance analysis on the basis of structure analysis and DOE is applied to the lower control am. We have proposed a statistical design model to evaluate the effect of structural modification by performing the practical multi-objective optimization considering weight, stress and fatigue lift. The lower control arm is performed the fatigue analysis using the load history of real road test. The design model is determined using the optimization of acquired load history with the fatigue characteristic. The characteristic function is made use of the optimization according to fatigue characteristics to consider constrained function in the optimization of DOE. The structure optimization of a lower control arm according to fatigue characteristics is performed. And the optimized design variable is D=47 m, T=36mm, W=12 mm. In the real engineering problem of considering many objective functions, the multi-objective optimization process using the mathematical programming and the characteristic function is derived an useful design solution.

• Transactions on Electrical and Electronic Materials
• /
• 제7권6호
• /
• pp.283-292
• /
• 2006

So that high-strength and electrical properties apply by excellent high voltage insulator electricity material, ATH content and platinum-based flame retardant that influence in flame retardant and tracking characteristic among composite of silicone rubber studied mechanical strength and influence getting to electrical properties. Composition of ${\alpha}$, ${\omega}-vinyl$ poly (dimethyl-methylphenyl) siloxane(VPMPS) of a polymer quantity made doing mole of D4, $D3^{Me,Ph}$ and VMS by 1000:15:0.2 mole ratio and uses basic catalyst tetramethylammonium silanolate(TMAS) and do opening equilibrium polymerization to be used to main polymer for high voltage insulation insulator. Control ATH content and content of platinum-based flame retardant and made high voltage insulation silicone rubber. Measured mechanical strength of making silicone rubber using UTM, and tracking characteristic according to standard of IEC 60587, flame retardant test studied effect that flame retardant characteristic gets in tracking characteristic, measuring according to UL94V method of test.

• 동력기계공학회지
• /
• 제18권2호
• /
• pp.57-61
• /
• 2014

Due to the changes of marine transportation industry, it requires ship in larger scale and high speed. In order to operate efficiently, the engine should be work in high power and high horse power. The increase of the number of the propeller blades and the pitch of the screw and the weight, vibration of shafting problems occurs. To evaluate the safety of the system through analyzing the dynamic characteristics propulsion shafting system, was used to prove or to verify the Lalanne & Ferraris model validation.. It indicates that the Program through Campbell diagram and Critical speed map, Root rocus map, to ensure the reliability of the experimental model.

• 한국전산구조공학회논문집
• /
• 제30권1호
• /
• pp.23-30
• /
• 2017

입자 복합재료는 입자의 형상, 크기 그리고 분포의 산포특성으로 인해 물성치의 편차가 존재하고, 입자 복합재료를 사용한 시스템의 거동 또한 산포가 존재한다. 하지만 입자의 산포특성을 고려하기 어려우므로 균질화법을 사용하여 시스템의 거동을 해석하거나 국부영역에서 미세구조를 적용하여 해석한다. 본 연구에서는 입자의 랜덤적 산포특성을 고려하기 위해 RMDFs(random morphology description functions)를 사용하여 랜덤 미세구조를 생성하였고, 단면 1차 모멘트를 사용하여 가우시안 함수의 수(N)와 입자의 산포특성의 관계를 분석하였다. 그리고 랜덤 미세구조 구조물의 거동을 분석하기 위하여 랜덤 미세구조를 전체에 반영한 외팔보에 multi-scale 해석을 수행하였다. 그 결과 입자의 산포특성과 외팔보의 처짐의 편차는 N의 증가에 따라 감소하고 N=200에서 수렴하는 것을 확인하였다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2009년도 동계학술발표회 논문집
• /
• pp.517-518
• /
• 2009

• 대한기계학회논문집B
• /
• 제35권1호
• /
• pp.67-73
• /
• 2011

본 연구는 DME-바이오디젤 혼합연료의 분무 및 연소, 배기 특성을 바이오디젤과 비교한 실험적 연구이며 실험연료는 바이오디젤 (BD100)과 중량 기준으로 DME를 20% 혼합한 DME-바이오디젤 혼합연료 (B-DME20)이다. 거시적 분무 특성을 연구하기 위하여 분무 이미지로부터 분무도달거리, 분무각을 측정하였으며, 연소 및 배기 특성은 단기통 직접 분사식 압축착화 기관을 이용하여 분석하였다. 실험결과 바이오디젤과 DME-바이오디젤 혼합연료는 분사율에서는 큰 차이가 없었지만 혼합연료의 경우에 착화지연기간이 짧고 연소압력이 높았으며soot 배출물이 현저하게 줄어들었다.

• 대한기계학회논문집A
• /
• 제34권4호
• /
• pp.481-486
• /
• 2010

Carbon Fiber Reinforced Plastic(CFRP) 복합재료는 높은 비강성 및 우수한 화학적 특성 등으로 인하여 여러분야에서 점점 사용이 증가하고 있다. 대부분의 CFRP 복합재료는 여러 부품들의 조립을 통해 제작된다. 이러한 독립된 부품들은 볼트, 핀 등과 같은 기계적인 방법을 통해 체결된다. 볼트나 핀에 의한 hole은 구조내에서 노치로 작용하여 부품의 강도저하의 원인이 된다. 본 논문에서는 홀의 크기와 시험편 폭이 노치재의 파괴강도에 끼치는 영향을 평가하여 hole을 포함하고 있는 평직 CFRP 복합재료의 정하중 파괴 강도를 실험적으로 평가하였다. 이를 위하여 본 논문에서는 홀 크기와 시험편 폭에 따른 점응력 조건의 특성길이를 평가하였으며, 특성길이와 노치재의 파괴강도의 관계를 확인하였다. 이를 이용하여 노치재의 정하중 파괴기준을 재정의하였다.