• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.27 no.4
• /
• pp.321-329
• /
• 2001

To establish systematic diagnosis and treatment planning of dentofacial deformity patient including facial asymmetry or hemifacial microsomia patient, comprehensive analysis of three dimensional structure of the craniofacial skeleton is needed. Even though three dimensional CT has been developed, landmark identification of the CT is still questionable. In recent, a method for correcting cephalic malpositioning that enables accurate superimposition of the landmarks in different stages without using any additional equipment was developed. It became possible to compare the three-dimensional positional change of the maxillomandible without invasive procedure. Based on the principle of the method, a new program was developed for the purpose of diagnosis and treatment planning of dentofacial deformity patient via three dimensional visualization and structural analysis. This program enables us to perform following menu. First, visualization of three dimensional structure of the craniofacial skeleton with wire frame model which was made from the landmarks observed on both lateral and frontal cephalogram. Second, establishment of midsagittal plane of the face three dimensionally, with the concept of "the plane of the best-fit". Third, examination of the degree of deviation and direction of deformity of structure to the reference plane for the purpose of establishing surgical planning. Fourth, simulation of expected postoperative result by various image operation such as mirroring, overlapping.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.5 no.2
• /
• pp.109-120
• /
• 1985

This thesis is a study on multiple close range photogrammetry, and the purpose of this study is to develop the most accurate adjustment method of three dimensional object coordinates. This was achieved by comparing the standard errors of actual data to the computed values from 2 photos and multiple photos. The conventional methods for multiple photos have been analyzed by using geometric model formation. But in this study, the equation of collinearity condition which has been applied to aerial photogrammetry was derived to be a basic principle of close range photogrammetry, and the algorithm for analyzing multiple photos was developed using simultaneous bundle adjustment. The method used in this study, showed more homogeneous accuracy in coordinate and more consistent variance of error than those of conventional methods. It was found that the cases using 3, 4, and 5 photos were more accurate than using 2 photos; the accuracies were improved to 15%, 35%, and 50%, for each case. Thus this study is expected to be useful in measuring the geometry of historic monuments and other structures requiring high accuracy. Also the combined case of multiple photos is considered to be effective for the precise analysis of the objects which are difficult to measure for obstacles.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.144-153
• /
• 2016

This study examined the recent study trends through a systematic review of the effect of sensory integration intervention and the objective reason to show the areas where sensory integration intervention is effective. The databases, Medline and EMBASE, were searched for "Occupational therapy", "Sensory integration therapy", "Sensory processing", "Weighted vest", and "Wilbarger protocol". For the analysis studies, 14 studies on the effects of sensory integration intervention from 2010 to 2015 were analyzed and organized according to the principle of PICO. According to the result, there were 4 studies each of evidence levels I and e V, which was the largest number of studies (28.6%). The result from frequency analysis of the measurement used for measuring the effects of intervention showed that GAS and VABS-II were used in the 4 studies (11.8%). 71.4% of children with autism spectrum were the major subject group in the analysis studies and sensory integration intervention had an effect on the motor performance, sensory processing, behavior, learning-related education, and occupation performance area. This study result will be useful for establishing sensory integration as an interventional program in occupational therapy practice. In further studies, it will be important to verify the intervention effect of sensory integration in another rehabilitation area.

• Journal of Korean Ophthalmic Optics Society
• /
• v.20 no.3
• /
• pp.277-284
• /
• 2015

Purpose: The study aimed to evaluate the effect of circle contact lens wearing on visual quality of the eyes after a refractive surgery. Methods: The objective visual quality was evaluated for 40 eyes who did not get refractive surgery and 30 eyes who got a refractive surgery after applying plano circle contact lenses on their eyes, respectively. Modulation transfer function (MTF), objective scatter index (OSI) and the focusing ratio on retina (Strehl ratio) were measured by using optical quality analysis system (OQAS) and the correlation between pupil size and objective visual quality was analyzed by measuring the pupil size. Results: When wearing circle contact lens on the eyes after refractive surgery, MTF and Strehl ratio were reduced and OSI was increased compared with the eyes without refractive surgery. The eyes after a refractive surgery showed more significant difference changes in MTF, OSI and Strehl ratio according to the pupil size compared with those without refractive surgery. Conclusions: The results showed that wearing of circle contact lens after the refractive surgery has deteriorated the objective visual quality based on the quality of focused image on the retina. Therefore, we suggest that sufficient understanding and consideration about the deterioration of visual quality is necessary in the case of circle contact lens wearing after refractive surgery.

• Korean Journal of Food Science and Technology
• /
• v.26 no.5
• /
• pp.496-499
• /
• 1994

The antioxidant effect of capsaicin, the pungent principle of red pepper and oleoresin extracted from red pepper was investigated by measuring TBA(Thiobarbituric acid) value and hydroperoxide value using CL-HPLC(Chemiluminescence-high performance liquid chromatography) during storage at $30^{\circ}C$. The antioxidant activity of capsaicin and oleoresin was compared with erythorbate already used. The antioxigenic effect of capsaicin and oleoresin was very effective to the preservation of ground bacon belly meat. Especially, oleoresin have a remarkable effect to prevent the peroxidation of ground bacon belly meat. Capsaicinoids were known as the main additives in Korea, but the antioxidant activity of meat products has not been reported. So, we suggest that capsaicin, especially, oleoresin combined with other natural antioxigenic substances as like tocopherol may be effective to prevent the oxidation of ground bacon belly meat.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.11
• /
• pp.641-649
• /
• 2017

In the study, the water quality of the Imjin River basin with pollutants of changing characteristics it was determined through statistical analysis, correlation analysis, principle component and factor analysis, and cluster analysis. Among all analyzed data points, the average water quality concentration at the Sincheon 3 site shows high levels of BOD 13.4 mg/L, COD 19.9 mg/L, T-N 11.145 mg/L, T-P 0.336 mg/L, TOC 14.2 mg/L, indicating that Sincheon basin requires intersive water quality management out of the entire drainage basin. The correlational analysis of comprehensive water quality data shows statistically significant correlation between COD, TOC, BOD, T-N water quality factors, as well as finding of high correlation between organic and nutrients. The principal component analysis show that 2 main components being extracted at 81.221% from the measuring station's entire data, while seasonal data show 3 main components being extracted at 96.241%. Factor analysis of the entire data set and the seasonal data identify BOD, COD, T-N, T-P, TOC as the common factors influencing water quality. The spatial and temporal cluster analysis showed 4 groups and 3 groups, respectively, according to seasonal characteristics and land use. By analysing the water quality factors for the Imjin River basins over an 8 year period, with consideration to the spatial and temporal characteristics, this study will become the fundamental analytic data that will help understand the future changes of water quality in the Imjin River basin.

• Membrane Journal
• /
• v.12 no.1
• /
• pp.41-50
• /
• 2002

The streaming potential generated by the electrokinetic flow within electric double layer of charged microchannel is applied to determine the zeta potential of hollow-fiber membrane pore by using the general Helmholtz-Smoluchowski equation. The streaming potential is know to provide a useful real-time information on the surface property and the interaction between pore and particles in actual situations and physicochemical conditions. The influence of physicochemical parameters upon the filtration with hollow-fibers has been examined with an in-situ and simultaneously monitoring the streaming potential as well as permeate flux. In particular, the present study examined an experimental method to identify the effect of cake layer which can vary according to the axial position of a hollow-fiber and the progress of membrane fouling by measuring the position-dependent streaming potential. As the latex concentration increases, the permeate flux decreased but the streaming potential increased. The growth of cake layer has been mire developed with increasing latex concentration, however, the effect of surface charges of latexes deposited on the membrane surface leads to increase the streaming potential. With increasing ionic concentration of KCI, both the permeate flux and the streaming potential decrease. The increase of ionic concentration provides a compact cake layer due to the shrinkage of Debye length and the decreased streaming potential results from the weakened ionic flows owing to a thin diffusive double layer.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.10
• /
• pp.719-724
• /
• 2016

This paper describes the performance improvement of an inrush current limiter to prevent damage or malfunctions in power converters due to the inrush current. When the power converter of military radar is operated, the circuit breaker of the power converter is often activated because the overcurrent flows through the circuit breaker of the power converter. Therefore, this study performed a cause analysis of the problem, which is a larger current flow than the intended current(250A). The operation principle of an inrush current limiter and SCR (Silicon Controlled Rectifier) used in the inrush current limiter was analyzed. As a result, the overcurrent flow through the circuit breaker was found to be due to dv/dt triggering of SCR. Based on cause analysis, this paper proposes a technique by adding the resistor in front of the SCR to prevent an unnecessary inrush current. Finally, the effectiveness of the improvement was verified by measuring the output current in the inrush current limiter. The power converter equipped with the improved inrush current limiter operated for more than 1 year without the circuit breaker of the power converter being activated.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.4
• /
• pp.449-455
• /
• 2019

This paper proposes a flyback diode of bridgeless PFC converter as SiC SBD (Schottky Barrier Diode) to achieve high efficiency. In addition, through the explanation of the operation principle of the bridgeless PFC converter, the conduction section of the freewheel diode is shown in the bridgeless PFC converter to verify the contribution of system loss due to the loss of the freewheel diode. The advantages of the SiC SBD device's physical properties and the reverse recovery characteristics are explained, and the efficiency is measured by measuring the turn-on and turn-off losses. The loss was calculated. The simulation results were calculated in consideration of device characteristics and verified through the waveform analysis and comparison of the actual system. In order to consider the device characteristics, the simulation was conducted using the thermal module of PSIM. As a result of the prototype test, the turn-on loss was 0.608W and the turn-off loss was 21.62W, resulting in the total switching loss of 22.228W. The comparison of the two results proved the validity of the experimental method. In addition, a high efficiency of 94.58% is achieved.

• The Journal of the Korea Contents Association
• /
• v.22 no.6
• /
• pp.69-77
• /
• 2022

Physical experiment through MBL has been used in many schools for a long time since students can check the experiment results immediately and conduct the experiment easily. However, conducting the experiment, not knowing the principle of the device or simply concentrating on the derived data has been raised as the problem of MBL experiment. To supplement this problem, this study measured the acceleration of gravity with the picket fence method, which is often used in MBL experiment, utilizing Arduino, calculated the error rate through a comparison to the actual acceleration of gravity and discussed the educational application of the experiment to measure it. As a result of the experiment, the error rate between the acceleration of gravity calculated by the experiment and the actual acceleration of gravity was about 1%, so it turned out that relatively accurate measurements were possible. Also, the sample mean of the experimental value was included in the confidence interval of 95%, so it could be concluded that it was a significant experiment. In addition, this study showed the possibility of the educational application of the experiment to measure it through the following: It can supplement the structural disadvantages of MBL; it can consider the interaction between Physics and Math; it is possible to converge with information course in STEAM education; and it is inexpensive to be equipped with the equipment. Hopefully, the physical experiment utilizing Arduino will further be revitalized in science gifted education based on this study.