• Wind and Structures
• /
• v.9 no.6
• /
• pp.493-503
• /
• 2006

The demand for energy in the world increases everyday. Blade energy which is wind turbine is a significant resource which must be appreciated in this field. Especially, in places where wind potential is high, the usage of wind energy is a beneficial factor for every country's economy. In this study, first, 6 different miniature rotor were produced by using 6 different NACA profiles. Rotors were produced with three blades. The electrical performance and the speed of start of action values that are provided from each rotor form were established by measuring them in the wind tunnel. The calculation of area and volumetric values of each profile and wind surfaces were made with AutoCad technical drawing program. As a result, it was searched whether there is any relation between electrical performance values and speed of start of motion that rotors produced and volumetric values of rotors. The aim of this study is to find out whether rotor blade volume is one of factors that influences rotor performance. The general tendency observed here is that the increase in the volume of rotor blade leads to an increase in the speed of start of motion and to a decrease in the rotor performance.

• Proceedings of the KOSOMBE Conference
• /
• v.1995 no.11
• /
• pp.78-81
• /
• 1995

In imaging the samples or human internal organs in a tube shape, general RF-probe types (that encircles a sample or places on top of the sample) are usually unsuitable for the internal imaging due to the degradation of signal-to-noise ratios(SNR's). In the present study the inside-out probes for Magnetic Resonance Imaging (MRI) have been constructed in the three different shapes such as an anti-solenoidal, a saddle and a dual surface types which are positioned as close to the area as possible by putting the probe inside the tubelike sample to improve filling factor. RF-field distributions have also been calculated depending upon the geometrical changes of anti-solenoid probes. Moreover, the performance of the inside-out probes has been checked by measuring SNR's of the images acquired. The inside-out probes constructed in this study produced better SNR's and rf-field uniformity in the area close to the probes in comparing with any other commercial probes. There is a high possibility that the constructed probes in the present study are applicable to the diagnosis of human bodies.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.1
• /
• pp.103-109
• /
• 2015

In this study, we quantitatively analyzed the data by measuring the radiation shielding rate and uniformity in order to evaluate the performance of an Apron. In addition, storage conditions were also evaluated. The uniformity measurement was performed by evaluating the Apron DICOM images using a PACS program. The experiment was intended for 51 Aprons being used in three hospitals in the Daejeon area. The radiation shielding rate and uniformity were measured per lead equivalent for 0.25 mmPb, 0.35 mmPb, and 0.5 mmPb. As a result, the higher lead equivalents were, the greater differences in the non-uniformity between the top part and the bottom part became (p=0.020). In all hospitals, regarding the non-uniformity of four places in Aprons, all showed statistically significant differences (p<0.01). The average value of the transmitted radiation dose showed less difference (p=0.005) in the bottom right than in the upper right but was statistically significant. There have been no marks of manufacturing date or the date of purchase in the Apron.

• International journal of advanced smart convergence
• /
• v.9 no.1
• /
• pp.202-208
• /
• 2020

Body balance necessary for ordinary daily activities can be undermined by diverse causes. In this study, as a way to control such a problem, we have produced smart insole as a wearable device in the form of insole and developed analysis software evaluating body balance, which measures ground reaction force applied to each area of sole and Center of Pressure (COP). The software visualized changes in COP positions while a user was moving and average COP positions, and it is also capable of measuring the COP values in the Anterior-Posterior (AP) and Medial-Lateral (ML) areas of feet. Through gait analysis, it can analyze the time of walking, strides, speed, COP trajectory while walking, etc. In addition, we have developed training contents for body balance improvement designed in consideration of Y-Balance Test and Timed Up and Go (TUG) Test. They were established in virtual reality similar to daily living environment so that people can expect more effective training results regardless of places.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.6 no.1
• /
• pp.48-57
• /
• 1988

In a traditional method to clarify causes of traffic accidents by using tapes, there appeared its limitation of reliability on the inspection of accident. With only limitted number of people and equipments, it is almost impossible to inspect and examine the causes of traffic accidents while not resulting a traffic complexity and its impediment. In this paper, as an approach to such problems, a rationalization in treatment of the traffic accidents was tried to be found, as accurately measuring 3-dimensional co-ordinates between the needed points by the stereo-models pictured by a stereo-camera, then composing some plane figures which show places and vehicles concerning the accidents, abstracting some needed informations from the resultants, and supplementing to solve problems on the pre-existing method, and sometimes when needed, enabling to treat the troubled points by reappearing those points.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.27 no.4
• /
• pp.390-397
• /
• 2017

Objectives: The purpose of this study was to evaluate concentrations in airborne total and respirable dusts in the cement manufacturing and handling industries. Methods: Fifty-three total dust and 42 respirable dustsamples were collected from 24 work places. Total dust samples were collected using a three-stage cassette. Respirable dust samples were collected using a cyclone equipped with a 37 mm, $5{\mu}m$ pore size PVC filter. Results: The geometric means of the dust concentrations were $0.10mg/m^3$ and $0.08mg/m^3$ in total dust and respirable dust, respectively. The Korean Occupational Exposure Limit($10mg/m^3$) was not exceeded, but the rate of exceeding the American Conference of Governmental Industrial Hygienist(ACGIH) Threshold Limit Value($1mg/m^3$) was 16.7%. Conclusion: When measuring the level of dust at cement manufacturers, the airborne concentration of respirable dust should be evaluated. In order to protect the health of workers exposed to cement dust, it is necessary to actively consider strengthening the Korean Occupational Exposure Limit.

• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.2
• /
• pp.63-68
• /
• 2010

In this study, subject areas with different topographic feature were selected for the purpose of measuring the slope terrain by setting Terrestrial LiDAR in different places. And the slope terrain was analyzed based on three-dimensional raw data obtained through the measurement of slope terrain. With DEM data obtained from five measurement instances with 5mm of scan interval by setting Terrestrial LiDAR on the site 30m away straight from the slope terrain consisting of asphalt, rock, soil, and plants, the slope terrain was analyzed according to topographic feature. In addition, in consideration of changes in setting location that might affect the measured result, this study reviewed the accuracy of measured data obtained from different measurement areas.

• Journal of the Korean Ceramic Society
• /
• v.45 no.6
• /
• pp.345-349
• /
• 2008

$TiO_2$ coating ceramic tile for self-cleaning purpose was prepared by the precipitant dropping method using $TiCl_4$ as a precursor. $TiO_2$ film was formed on the ceramic tile by spray-coating technique and heat-treated at $500^{\circ}C$ for 1 h. The size and crystalline structure of $TiO_2$ particles were 15.3 nm and anatase phase. The outdoor exposure tests were conducted and the effects of outdoor exposure test conditions, such as exhaust concentration of contamination materials (test places), the UV light intensity (irradiation direction) and coating amounts of $TiO_2$ on the self-cleaning properties were investigated by the brightness measurements. As a results, self-cleaning property of $TiO_2$ coating tile was affected by the coating amount of $TiO_2$ however, not affected by the UV light intensity included in sun's ray (irradiation direction). $TiO_2$ coating ceramic tile can be utilized for exterior finishing materials because of self-cleaning property of $TiO_2$ coating tile.

• Physical Therapy Korea
• /
• v.21 no.4
• /
• pp.40-48
• /
• 2014

Differential item functioning (DIF) based on Rasch model can be used to examine whether the items function similarly across different groups and identify items that appear to be too easy or difficult after controlling for the ability levels of the compared groups. The Oswestry low back pain disability (Oswestry) has traditionally been proved as an effective instrument measuring disability resulting from low back pain (LBP). In this study, DIF method was used to explore whether items on the Oswestry perform similarly across two different groups (participants with LBP and no LBP). A series of Rasch analyses on the 10 items of the Oswestry were performed using Winsteps$^{(R)}$ software. Forty-two participants with back pain were recruited from 3 rehabilitation hospitals in Gainesville, Florida. Another 42 participants with no LBP were recruited from several public places in the rehabilitation hospitals. Based on the DIF analysis across the two groups, several items were found to have an uniform DIF. Participants with no LBP had more difficulty on lifting and personal care items and participants with LBP had more difficulty on sleeping and social life items. For non-LBP group, a high ceiling effects (83% of participants with non-LBP) was detected, which was not be able to be effectively measured with the Oswestry items. Although 4 items of the Oswestry function differently across the two groups, all items of the Oswestry were well targeted the LBP group.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.16 no.2
• /
• pp.55-70
• /
• 2014

The purpose of this study was to investigate purchasing behaviors of summer clothes using cooling textiles and clothing design preference in summer season. The subjects were 623 married women aged from 30s to 60s. The research method was a survey and the measuring instruments consisted of purchasing behaviors of summer clothes using cooling textiles, clothing design preference in summer season, and subjects' demographics attributions. The data were analyzed by frequency analysis, multiple response analysis, cross tabs analysis, and $x^2$ test, using SPSS statistical program. The results were as follows. First, important clothing selection criteria were design, price, and textiles. The main items using cooling textiles that female consumers purchased were T-shirts, pants, and outdoor & sportswear. Main information sources of summer clothes using cooling textiles were internet and store display, and purchasing places were fashion outlet, internet, brand store, and department store. Second, female consumers most preferred comfortable and casual style. They mainly preferred white and blue color, pastel and pale tone, plain pattern, and cotton and functional materials in summer season. Third, there were many important differences among 4 age groups on purchasing behaviors of summer clothes using cooling textiles and design preference in summer season.