• 한국생산제조학회지
• /
• 제8권1호
• /
• pp.119-125
• /
• 1999

The distribution of fatigue crack growth rate is subjected to the measuring interval and calculated method of growth rate. In this paper, in order to establish the method of determining the distribution of fatigue crack growth rate, which ignores those influences, a series of fatigue crack growth experiments and measuring intervals of crack length calculated reasonable are presented. The main conclusions obtained are summarized as follows: 1) As a result of the ΔP constant test and ΔK constant test, it is thought that an approximate measuring interval of 0.3~0.7mm is reasonable, which allows for few errors and is little subjected to the calculated method of crack growth rate. 2) After generally comparing the error estimation by using the experimental data of CCT specimen with the error rating of the CT specimens, it is possible that the fatigue test has few errors within the measuring interval, ξ(Δa/W)=0.0067~0.017, regardless of the dimension of specimen geometry.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제11권1호
• /
• pp.8-11
• /
• 2011

Atanassov [1,2] and Szmidt and Kacprzyk[7,8] studied various methods for measuring distances between intuitionistic fuzzy sets. In this paper, we consider interval-valued intuitionistic fuzzy sets and discuss these methods for measuring distances between interval-valued intuitionistic fuzzy sets.

• 대한기계학회논문집
• /
• 제17권10호
• /
• pp.2391-2397
• /
• 1993

The distribution of fatigue crack growth rate is influenced by the measuring interval and methods of calculation of crack growth rate. The purpose of this paper is to suggest a method for the evaluation of crack growth rate distribution without the influence. The constant ${\Delta}P$ test and the constant .DELTA.K test are executed by using the CT specimen. The measuring interval of (${\Delta}a$/W=0.0067~0.014) crack length is not affected by methods of the calculation of the fatigue crack growth rate is suggested.

• Journal of the Korean Data and Information Science Society
• /
• 제17권2호
• /
• pp.529-536
• /
• 2006

Investigators use either Euclidean distance or volume of a simplex defined composed of data points as agreement index to measure chance-corrected agreement among observers for multivariate interval data. The agreement coefficient proposed by Um(2004) is based on a volume of a simplex and does not depend on the variables' measuring units. We consider a comparison of Um(2004)'s agreement coefficient with others based on two unit-free distance measures, Pearson distance and Mahalanobis distance. Comparison among them is made using hypothetical data set.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1998년도 춘계학술대회 논문집
• /
• pp.251-257
• /
• 1998

The distribution of fatigue crack growth rate is subjected to the measuring interval and calculated method of growth rate. In this paper, in order to establish the method of determining the distribution of fatigue crack growth rate, which ignores those influences, a series of fatigue crack growth experiments and measuring intervals of crack length calculated reasonable are presented. The main conclusions obtained are summarized as follows: 1) As a result of the ΔP constant test and ΔK constant test, it is thought that an approximate measuring interval of 0.3~0.7mm is reasonable, which allows for few errors and is little subjected to the calculated method of crack growth rate.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2007년도 춘계학술대회 학술발표 논문집 제17권 제1호
• /
• pp.175-178
• /
• 2007

We give a geometrical interpretation of the interval-valued fuzzy set. So, based on the geometrical background, we propose new distance measures between interval-valued fuzzy sets and compare these measures with distance measures proposed by Burillo and Bustince and Grzegorzewski, respectively. Furthermore, we extend three methods for measuring distances between interval-valued fuzzy sets to interval-valued intuitionistic fuzzy sets.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.53-62
• /
• 1985

The position and time interval of wave components of the electrocardiogram are used as important data for physician's diagnosis. In case of using the existing definition of the onset of the wave component of the electrocardiogram, they have some problems of defining the precise position of the isoelectric line, of defining the limit of the gradient accepted as the onset, and of the gradient being changed by noise. Therefore, in this paper all time intervals and positions of wave components needed for data of diagnosis were obtained correctly by turning point data reduction algorithm and linear regression intersection algorithm, and the viability of the method of intersecting lines was established in comparison to the four methods of calculating the PR interval.

• International Journal of Internet, Broadcasting and Communication
• /
• 제13권2호
• /
• pp.208-217
• /
• 2021

3D-CNN is one of the deep learning techniques for learning time series data. However, these three-dimensional learning can generate many parameters, requiring high performance or having a significant impact on learning speed. We will use these 3D-CNNs to learn hand gesture and find the parameters that showed the highest accuracy, and then analyze how the accuracy of 3D-CNN varies through input data changes without any structural changes in 3D-CNN. First, choose the interval of the input data. This adjusts the ratio of the stop interval to the gesture interval. Secondly, the corresponding interframe mean value is obtained by measuring and normalizing the similarity of images through interclass 2D cross correlation analysis. This experiment demonstrates that changes in input data affect learning accuracy without structural changes in 3D-CNN. In this paper, we proposed two methods for changing input data. Experimental results show that input data can affect the accuracy of the model.

• Journal of the Korean Data and Information Science Society
• /
• 제16권3호
• /
• pp.621-628
• /
• 2005

This article addresses the problem of measuring a joint agreement between multiple raters and a standard set of responses. A new agreement measure based on Um's approach is proposed. The proposed agreement measure is used for multivariate interval responses. Comparison is made between the proposed measure and other corresponding agreement measures using hypothetical data set.

• 사상체질의학회지
• /
• 제4권1호
• /
• pp.107-148
• /
• 1992

The definitions of Four Constitution (Tae-Yang-In, So-Yang-In, Tae-Eum-In, So-Eum-In) in Four-Beginning-Theory (四端論) and Distribution-Theory (擴充論) were morphologically diagrammatized. the method of measuring the five parts came from the diagrams. The five parts are the followings; Top-Line is the distance between Rt. & Lt.Shoulders. Bosom-Line is the horizontal distance passing through the Rt. & Lt.nipples. Stomach-Line is the horizontal distance passing through the Rt. & Lt. acupuncture point Bool-Yong (不容穴). Navel-Line is the horizontal distance passing through the navel. Bottom-Line is the distance between the Rt.& Lt. anterior superior iliac spines. According to it, 311 people were measured in the clinic. Through the measured numerical values, to find out the objective propriety of the morphological diagrammings and the discriminating ability of Four Constitutions by the method of measuring the five, the author tried this study and got the following results. 1. On the ground of the Internal Organs-Theory (臟腑論), the definitions of Four Constitutions were classified and diagrammatized step by step and it was possible to draw the morphological graphs satisfying the reasonable condition objectively. 2. It was found that the graphings by Mean, Standard Deviation and 95% Confidence Interval for mean of the numerical values of five measured parts and the morphological diagrammings of the definitions in Four-Beginning Theory and Distribution-Theory drove to the same figures. 3. Through the method of the Analysis of variance and the Discriminant Analysis, it was discovered that the measured numerical values of five parts could distinguish the Four Constitutions. 4. Tae-Yang-In has the longest Top-Line and the shortest Bottom-Line. The Mean head of Confidence Interval from Top to Bottom is downwardly decreased at the rate of 3.7, 1.5, 1.8, 3.4. 5. So-Yang-In has the longest Top-Line and the shortest Bottom-Line. The Mean head of confidence Interval from Top to Bottom is downwardly decreased at the rate of 2.3, 1.5, 1.5, 1.1. 6. Tae-Eum-In has the longest Navel-Line. The Mean head of Confidence Interval from Navel to Top is upwardly decreased at the rate of 0.5, 0.4, 2.5 and downwardly decreased at the rate of 2.7 between Navel and Bottom. 7. So-Eum-In has the longest Bottom-Line. The Mean head of Confidence Interval from Bottom to Top is upwardly decreased at the rate of 1.1, 1.1, 1.8, 2.3. From the above findings, it was possible to draw the morphological graphings satisfying the objectively reasonable conditions in the definitions of Four-Beginning-Theory and Distribution-Theory and it was proved that the results of the Positive Analysis, carried with the measured numerical values of five parts from the diagramming, could show the objective propriety of the morphological graphings and the discerning ability of Four Constitutions by the method of measuring the five parts.