• Journal of Mechanical Science and Technology
• /
• 제17권1호
• /
• pp.11-22
• /
• 2003

In this paper, a method for optimal placement of sensors and actuators is presented by using new measures of modal controllability and observability defined in a balanced coordinate system. The proposed new measures are shown to have a great advantage in practical use when they are used as criteria for selecting the locations of sensors and actuators, since the most controllable and observable locations can be obtained to be identical. In addition, they are more accurate than the measures of Hamdan and Nayfeh in that the effects of the eigenvector norm are considered into the magnitude of measures. In simulations, to verify the effectiveness of the proposed measures and optimal placement method, the closed-loop response of a simply supported flexible beam, in which the number and locations of actuators are determined by using the proposed measures and optimal placement method, has been examined and compared with the case of Hamdan and Nayfeh’s measures.

• 무역상무연구
• /
• 제12권
• /
• pp.615-641
• /
• 1999

Trade and the environment emerged as a major and complex issue for trade negotiators in the final stages of the Uruguay Round negotiations. The agreements and other international measures employing trade measures and trade sanctions for achieving global environmental objectives are Vienna Convention on the Protection of the Ozone Layer(1985), the Montreal Protocol on Substances that deplete the Ozone Layer(1987), The Framework Convention on Climate Change(1992), the Convention on Biological Diversity(1992), the Basel Convention on the Control of Transboundary Movement of Hazardous Waste and their Disposal(1992), the Convention on International Trade in Endangered Species of Wild Faunna and Flora(1975), the Rio Declaration, the Agenda 21, etc. The texts of the World Trade Organization(WTO) incorporated certain provisions which were designed to reflect some of the environmental concerns are Trade-Related Aspects of Intellectual Properity Rights(TRIPs), Trade-Related Investment Measures (TRIMs), the General Agreement on Trade in Services(GATS), and Technical Barriers to Trade(TBT) There is the possibility of conflict between multilateral environmental agreements and WTO agreements granting waivers against trade measures and sanctions. This remains a possibility, especially between countries which are Member of WTO and which are not Members of the relevant multilateral environment agreements, and countries which are Members of both the WTO and the relevant MEAs. Measures taken under the trade-related provisions of MEAs could potentially give rise to conflicts under obligations arising in WTO texts. If the parties in dispute are WTO members while they are not members of MEAs, the WTO provisions can be granted a certain priority in terms of international norms and vice versa. When the parties concerned are both WTO members and MEAs, it will be rational to grant the WTO provisions a priority. However, such measures should neither constitute a means of arbitrary or unjustifiable discrimination between countries where similar conditions prevail, nor create a disguised restriction on trade. Also any trade measures taken should be necessary to prevent developments in trade from endangering the effectiveness of an MEA and they should be proportional and least trade restrictive.

• Journal of Preventive Veterinary Medicine
• /
• 제42권4호
• /
• pp.163-170
• /
• 2018

The cost-effectiveness of foot-and-mouth disease (FMD) control strategies was evaluated using a simulation model fitted to the 2010/11 FMD epidemic in the city of Andong, Republic of Korea. Seven FMD-control strategies were evaluated with respect to the direct cost of a FMD-control strategy, such as slaughtering, movement restriction, and vaccination. All the strategies included pre-emptive slaughtering, movement restriction, and vaccination, but the levels of each control option were different. The simulated median cost of the baseline FMD-control strategy (three kilometers of pre-emptive slaughtering area, 100 days of movement restriction and vaccination of all FMD-susceptible animals in the study area) was estimated to be USD 99.7 million. When a five kilometer vaccination area was applied (with the other control measures being the same as the baseline strategy), the simulated median cost was reduced to USD 81.1 million from USD 99.7. The simulated median costs were USD 107.6 million for a five kilometer radius slaughtering area and USD 168.8 million for 60 days of movement restriction. The FMD-control strategy cost decreased with increasing number of farms depopulated per day. The probability of passive surveillance being effective or the probability of the successful implementation of movement restrictions were increased. Cost-effectiveness analysis is a suitable tool for evaluating the financial consequences of FMD-control strategies by comparing the cost of control strategies for a specific area.

• 대한안전경영과학회지
• /
• 제26권1호
• /
• pp.75-89
• /
• 2024

The objective of this study was to conduct research and analysis using Group Focus Interview to survey the between construction site workers and managers implementing for the Severe Accident Punishment Act. Focused on measures to improve safety management effectiveness for the effectiveness of establishing a safety management system. A plan to improve the efficient safety management system was presented to 50 construction industrial managers and workers. In order to ensure the industrial accident prevention policies appropriately, it is necessary to be aware of safety obligations for workers as well as business operators. In addition, despite the existence of a commentary on the Serious Accident Punishment Act, confusion in the field still persists, so in the event of a major accidents, the obligation to take safety and health education is strengthened, and effective case education is proposed by teaching actual accident cases suitable for actual working sites. It is necessary to make all training mandatory, and it is necessary to reconsider awareness through writing a daily safety log, awareness of risk factors, etc., and writing down risk information. Above all, at the construction ordering stage, it is necessary to keep the construction safety, request corrections and supplements for problems issues that arise, and consult between the orderer and the construction company about the problems issues. Rather than having only the construction company correct or supplement the safety management plan, the contents should be shared with supervisors and workers to establish a more practical solution. Results of this study will contribute to improving the effectiveness of the serious accident and construction safety management system.

• Geomechanics and Engineering
• /
• 제32권1호
• /
• pp.111-123
• /
• 2023

The slope of an open cut tunnel is located above the exit of the Leijia tunnel on the Changgan high-speed railway. During the excavation of the open cut tunnel foundation pit, the slope slipped twice, a large landslide of 92500 m³ formed. The landslide body and unstable slope body not only caused the foundation pit of the open cut tunnel to be buried and the anchor piles to be damaged but also directly threatened the operational safety of the later high-speed railway. Therefore, to study the stability change in the slope of the open cut tunnel under heavy rain and excavation conditions, a 3D numerical calculation model of the slope is carried out by Midas GTS software, the deformation mechanism is analyzed, anti-sliding measures are proposed, and the effectiveness of the anti-sliding measures is analyzed according to the field monitoring results. The results show that when rainfall occurs, rainwater collects in the open cut tunnel area, resulting in a transient saturation zone on the slope on the right side of the open cut tunnel, which reduces the shear strength of the slope soil; the excavation at the slope toe reduces the anti-sliding capacity of the slope toe. Under the combined action of excavation and rainfall, when the soil above the top of the anchor pile is excavated, two potential sliding surfaces are bounded by the top of the excavation area, and the shear outlet is located at the top of the anchor pile. After the excavation of the open cut tunnel, the potential sliding surface is mainly concentrated at the lower part of the downhill area, and the shear outlet moves down to the bottom of the open cut tunnel. Based on the deformation characteristics and the failure mechanism of the landslides, comprehensive control measures, including interim emergency mitigation measures and long-term mitigation measures, are proposed. The field monitoring results further verify the accuracy of the anti-sliding mechanism analysis and the effectiveness of anti-sliding measures.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1998년도 추계학술대회 학술발표 논문집
• /
• pp.31-36
• /
• 1998

This paper proposes a method to select essential elements in a human evaluation model using the Choquet integral based on fuzzy measures and applies the model to the evaluation of human interface. Three kinds of concepts, Increment Degree, average of Increment Degree, Necessity coefficient, are defined. The proposed method selects essential elements by the use of the Relative necessity coefficient. The proposed method is applied to the analysis of human interface. In the experiment, (1) a warning sound, (2)a color vision, (3) the size of working area, (4) a response of confirmation, are considered as human interface elements. subjects answer the questionnarie after the experiment. From the data of questionnaire, fuzzy measures are identified and are applied to the proposed model. effectiveness of the proposed model is confirmed by the comparison of human interface elements extracted from the proposed model and those from the questionnarie.

• 제어로봇시스템학회논문지
• /
• 제1권2호
• /
• pp.71-77
• /
• 1995

The control effectiveness and disturbance suppressibility are mainly governed by a left eigenstructure of a system. In this paper, a control algorithm which uses an output feedback eigenstructure assignment scheme is proposed in order that a desired closed-loop system has the specified degree of controllability and/or degree of disturbance suppressibility. To do this, a modal and a gross disturbance suppressibility measures are proposed. A modified version of Hamdan and Nayfeh's modal controllability measure is also presented. The validity and usefulness of the proposed measures and the controller design algorithm are illustrated by designing a controller for a third-order system as an example.

• 한국시스템다이내믹스연구
• /
• 제14권4호
• /
• pp.37-62
• /
• 2013

The purpose of this paper is to find out some clues about effectiveness and implementing timing of the control measures against Foot-and-Mouth Disease (FMD) in Korea. To do that, the case of FMD, which broke out during November 2010 in Korea, is examined and constructed as a system dynamics simulation model. The implications of simulation result are as follows. First of all, it is most effective measure to prevent the movement of vehicle from infected farmhouse to other noninfected farmhouses, which are located far away, in the early stage of FMD diffusion. Secondly, earlier vaccination can be adopted as a reliable means to control the epidemic when FMD spreads widely. Finally, reducing the time to vaccinate the whole noninfected livestock is a little help to restrain the additional infections of FMD.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제17권2호
• /
• pp.35-44
• /
• 2011

The aim of this study is to review the literature addressed the methodology to measure and evaluate the health outcomes as evidences for health benefits through the study on the healing environment, garden, therapeutic garden and viewing landscape and so forth. The research methods and measures used to assess health effects in the reviewed studies have applied in a different way ranged from quantitative methods (physical measures or quantitative observations) to qualitative methods (qualitative observations and surveys). In a literature review of research articles on the health outcomes have been found various research methods and measures used to assess health effects. This study will be concentrated mainly on methodological considerations in order to find the significant evidences related to evidence-based design (EBD). Future research should build the body of methodological knowledge to find more empirical evidences as sound scientific data and to improve the effectiveness of design interventions.

• Journal of applied mathematics & informatics
• /
• 제18권1_2호
• /
• pp.431-439
• /
• 2005

The aim of this paper is to derive the analytical solution of the queue: $M/E_{r}/1/k/N$ for machine interference system with balking and reneging considering the discipline FIFO. Some measures of effectiveness and some special cases are obtained.