• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.4
• /
• pp.1515-1522
• /
• 2011

This paper proposed the finite element analysis technique for improving the correleration accuracy between FEA and test on a pedestrian lower legform impact. Europe has been evaluating the bumper pedestrian impact by Euro-NCAP, and it will also be applied in a domestic area by K-NCAP in 2013. By using the compression test result of bending resisting stiffener, a pedestrian bumper modeling guide was presented by analayzing the force-displacement curve of stiffener. And by using the sensor measurement results in car pedestrian test, pedestrian impact behavior was analyzed between test and finite element analysis result. Finally, the finite element analysis guide for a pedestrian bumper impact was presented to improve the correleration accuracy.

• The KIPS Transactions:PartA
• /
• v.16A no.5
• /
• pp.381-388
• /
• 2009

The spread of wireless Internet technology development and applications with location information in the form of location-based services are becoming more diverse. In particular, where you recognize the location of objects such as people and things and to provide valuable services based on the ubiquitous and location-based services are emerging as an important service. The collision between the vehicle position measurement in this thesis and offers related service system. Used in the proposed system, the GPS PACKET with information about the location and time of collision for the vehicle crash, the vehicle consists of a NodeID. Cause a conflict between these data at the vehicle, the vehicle through the gateway from the server to decide whether to go on to determine that an emergency situation, Emergency Center, the location information and giving information about whether the conflict is measured. Also, for such an emergency, such as a family on the outside of the wireless terminal related to Wireless (PDA, Phone) is to let me know. The server to want to save the crash information to the database of configuration. Additionally, the proposed U-LBS system to verify the validity of the experiment was performed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.714-714
• /
• 2012

금강 하류부의 경우 '97년 금강홍수예경보 자료를 활용하고 있으나, 수치모형 결과 자료로 실측에 의한 검증이 이루어지지 않았으며, 이러한 문제점을 해결하기 위해서는 평수기 및 홍수기의 하류도달시간 실측 기술을 확보하여 실측을 통한 수치모형의 검증 및 보완이 필요한 실정이다. 또한, 보정된 수치모형을 이용한 도달시간 실시간 예측을 통해 댐 보 운영의 효율성을 확보하고 대 내외에 검증 결과를 제시할 필요가 있다. 하천 전 구간에서 실측할 수 있는 센서기술을 활용하여 금강의 일부 보 구간에 대하여 계측을 수행하였다. 계측결과 유출량-평균도달시간에 영향을 미치는 요인으로는 하상경사, 하폭, 지류유입량, 강우량, 식생, 하천구조물 등이 있으며, 이러한 요인을 수리학적 모형을 적용하여 모든 사상에 대해 정확한 해석을 한다는 것은 매우 어려운 일이다. 이로 인해 유출량-평균도달시간과의 관계 분석을 위해서는 여러 하도구간에 대한 지속적이고 많은 계측이 수반되어야 하며, 이로부터 얻어진 계측 결과를 토대로 각 하천별 유출량별 평균도달시간 관계에 대한 해석 방법을 제안할 수 있을 것으로 기대한다. 본 연구의 계측결과는 홍수기 8회, 평수기 10회를 통해 보 건설에 따른 하류 도달시간의 영향을 분석하기에는 계측 자료가 매우 부족한 실정이며, 향후 지속적인 관측자료 확보를 통해서 보 운영에 따른 도달시간의 영향을 분석할 수 있는 기초자료 확보가 매우 중요할 것이다. 또한, 지류 유입량을 고려한 실측자료를 기초로 기존 도달시간 산정 방법을 개선하고, 도달시간 계측 결과의 신뢰성 확보를 위한 지속적인 연구개발 수행하여 금강 전 유역으로 확대 적용하기 위한 방안 마련이 필요하다. 이를 통해 4대강살리기 사업 전 후의 도달, 지체시간 분석하여 사업구간에 대한 계측을 통한 금강에서의 보 건설 전 후의 영향 검토에 반영할 수 있도록 하여 수계별 관계분석 자료로 활용할 수 있도록 제공하여야 할 것이다.

• Tunnel and Underground Space
• /
• v.21 no.1
• /
• pp.1-10
• /
• 2011

In these days, the development of optical fiber sensor technology is so remarkable that it can measure various physical and chemical quantities ranging from a few millimeters to over several kilometers. In addition, it is attempted to assess the structural integrity of the state of the advanced technologies and existing structures such as ships, aircrafts, and bridges. This paper introduced the case histories of the measuring technology of optical fiber applied on structures such as roads and tunnels. The case history using OTDR (Optical Time Domain Reflectometery) was also introduced in this paper. Measurement of the pre-convergence of a tunnel is essential to assess the safety of a tunnel and understand the geological conditions ahead of an advancing tunnel. Therefore, the pre-convergence measuring technology using OTDR is expected to substitute conventional measuring techniques.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.36 no.3
• /
• pp.225-230
• /
• 2016

Fiber Bragg grating (FBG) sensors are currently the most prevalent sensors because of their unique advantages such as ease of multiplexing and capability of performing absolute measurements. They are applied to various structures for structural health monitoring (SHM). The signal characteristics of FBG sensors under thermal loading should be investigated to enhance the reliability of these sensors, because they are exposed to certain cyclic thermal loads due to temperature changes resulting from change of seasons, when they are applied to structures for SHM. In this study, tests on specimens are conducted in a thermal chamber with temperature changes from -$20^{\circ}C$ to $60^{\circ}C$ for 300 cycles. For the specimens, two types of base materials and adhesives that are normally used in the manufacture of packaged FBG sensors are selected. From the test results, it is confirmed that the FBG sensors undergo some degree of compressive strain under cyclic thermal load; this can lead to measurement errors. Hence, a pre-calibration is necessary before applying these sensors to structures for long-term SHM.

• Korean journal of food and cookery science
• /
• v.4 no.2
• /
• pp.51-56
• /
• 1988

The sensory and instrumental characteristics of warm and cool cooked rices with pressure and electric cookers were examined. The types of rice varieties tested were Choucheong (traditional rice variety) Samgang and Seogwang (high-yielding rice varietis) The result of sensor evaluation revealed more significant differences in most of appearance, texture characteristics than flavour. The difference of sensory characteristics according to the types of cookers and the warm or cool cooked rices was greatest in Seogwang among three varieties. The instrumental measurement of cooked rices using instron showed that the difference between types of varieties and cookers was more clearly in cool cooked rices than warm ones. Especially hardness in instrumental characteristics revealed highly signficant difference. With regard to the correlation between instrumental and sensory characteristics, hardness had a significantly high correlation with texture while others had low ones.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.6
• /
• pp.1120-1127
• /
• 2008

This paper presents implementation of localization system using UWB (Ultra-Wide Band) sensors and its experimental results along with development of context-aware services. In order for precise measurement of position, we experimented various conditions of pitch angles, yaw angles, number of sensors, height of tags along with measuring errors at each installation. As an application examples of the location tracking system, we developed an intelligent health training management system based on context-aware technology. The system provides appropriate training schedule to a trainee by recognizing position of the trainee and current status of gymnastic equipments and note the usage of the equipment through a personal digital assistant (PDA). Error compensation on position data and moving direction of the trainee was necessary for context-aware service. Hence, we proposed an error compensation algorithm using velocity of the trainee. Experimental results showed that proposed algorithm had made error data reduce by 30% comparing with the data without applying the algorithm.

• Korean Journal of Remote Sensing
• /
• v.26 no.3
• /
• pp.297-304
• /
• 2010

Since the change in Doppler centroid according to moving targets brings alteration to the phase in azimuth differential signals of synthetic aperture radar (SAR) data, one can measure the velocity of the moving targets using this effect. In this study, we will investigate theoretically measuring the velocity of an object from azimuth differential signals by using range compressed data which is the interim outcome of treatment from the simulated SAR raw data of moving targets on the background of sea clutter. Also, it will provide evaluation for the elements that affect the estimation error of velocity from a single SAR sensor. By making RADARSAT-1 simulated image as a specific case, the research includes comparisons for the means of velocity measurement classified by the directions of movement in the four following cases. 1. A case of a single target without currents, 2. A case of a single target with tidal currents of 0.5 m/s, 1 m/s, and 3 m/s, 3. A case of two targets on a same azimuth line moving in a same direction and velocity, 4. A case of a single target contiguous to land where radar backscatter is strong. As a result, when two moving targets exist in SAR image outside the range of approximately 256 pixels, the velocity of the object can be measured with high accuracy. However, when other moving targets exist in the range of approximately 128 pixels or when the target was contiguous to the land of strong backscatter coefficient (NRCS: normalized radar cross section), the estimated velocity was in error by 10% at the maximum. This is because in the process of assuming the target's location, an error occurs due to the differential signals affected by other scatterers.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.9
• /
• pp.72-80
• /
• 2019

In this task, the tool dynamometer design and manufacture, and the Ansys S/W structural analysis program for tool attachment that satisfies the cutting force measurement requirements of the tool dynamometer system are used to determine the cutting force generated by metal cutting using 3-axis static structural analysis and the LabVIEW system. The cutting power in a cutting process using a milling tool for processing metals provides useful information for understanding the processing, optimization, tool status monitoring, and tool design. Thus, various methods of measuring cutting power have been proposed. The device consists of a strain-gauge-based sensor fitted to a new design force sensing element, which is then placed in a force reduction. The force-sensing element is designed as a symmetrical cross beam with four arms of a rectangular parallel line. Furthermore, data duplication is eliminated by the appropriate setting the strain gauge attachment position and the construction of a suitable Wheatstone full-bridge circuit. This device is intended for use with rotating spindles such as milling tools. Verification and machining tests were performed to determine the static and dynamic characteristics of the tool dynamometer. The verification tests were performed by analyzing the difference between strain data measured by weight and that derived by theoretical calculations. Processing test was performed by attaching a tool dynamometer to the MCT to analyze data generated by the measuring equipment during machining. To maintain high productivity and precision, the system monitors and suppresses process disturbances such as chatter vibration, imbalances, overload, collision, forced vibration due to tool failure, and excessive tool wear; additionally, a tool dynamometer with a high signal-to-noise ratio is provided.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.76-76
• /
• 2015

토양수분은 생태수문학에서 식생과의 상호작용의 중요한 인자이자, 대기와의 상호작용으로 인한 총체적인 물 순환에 밀접한 관련이 있다. 수문학적으로는 증발, 침투, 지하수 함량, 토양 침식, 식생 분포 등을 지배하는 중요한 요소이고, 특히 시 공간적 분포특성은 강수 사상 후 토양으로의 침투 및 토양수분의 재분포, 증발산과 불포화대에서의 오염물의 이송을 예측하는데 매우 중요하다. 또한, '07년 하천법 개정으로 증발산량 및 토양수분량이 신규 수문조사 항목으로 추가되어, 토양수분 측정에 대한 필요성이 높아졌다. 따라서, 2008년 5월, K-water연구원에서는 현재 시험유역으로 운영하고 있는 용담시험유역에 토양수분관측망(6개 관측소)을 구축하였다. 토양수분계는 토양수분을 결정하는 가장 중요한 인자인 강우자료의 획득이 이루어지는 지점에 설치하여 정확도와 신뢰도를 높일 수 있도록 용담시험 유역 내 6개 우량관측소에 설치하였다. 하지만 장비의 노후화에 따른 자료 취득의 어려움으로 인하여 2013년 4월, 토양수분계를 전면 교체하였다. 토양수분계는 기존의 FDR 방식에서 EC 농도에 대한 영향이 가장 적고, 플럭스 타워에 위치한 토양수분계 센서와 동일한 TDR 방식의 센서로 장비를 전면 교체하였다. 센서 설치 장소 변경에 따른 TDR 센서의 검증과 그리고 흙의 종류, 입도, 다짐도, 온도 등에 의한 오차가 발생 여부를 판단하기 위하여 이에 대한 보정을 실시하였다. 원지반 시료채취를 통하여 토양수분량을 측정하였고, TDR 센서에 의해 측정된 토양수분량과 채취된 시료에서 측정된 토양수분량의 결과를 비교하였고, 각 지점별 토양구성비와 전기전도도 조건을 고려하여 각 토층별 계수적용을 달리하여 센서 보정을 실시하였다. 그 결과 기존 센서 제조사에서 제안한 방정식을 그대로 사용하는 것 보다는 센서 검증을 통하여 얻은 계수보정에 의한 토양수분 변환식을 사용하는 것이 정확한 현장 자료를 확보할 수 있고, 신뢰도 높은 자료를 얻을 수 있다고 판단된다.