• 한국산학기술학회논문지
• /
• 제15권9호
• /
• pp.5854-5860
• /
• 2014

본 연구에서는 대표적인 토목구조물인 교량에서 영상 기반 변위 계측장치(VDMS)를 이용하여 변위를 측정하고, 고가의 변위측정장비인 LDV와의 비교를 통하여 그 현장 적용 성능을 평가하였다. 본 연구에서 사용한 VDMS는 카메라와 마커, 프레임 그래버, 노트북으로 구성되었으며, 마커를 구조물에 부착하여 그 영상을 촬영하고 평면 호모그래피 기법을 이용하여 마커가 부착된 구조물의 변위를 측정하는 장치이다. 개발된 VDMS의 성능 검증을 위하여 우선 소형 구조물을 이용한 간단한 실내 실험을 수행하였다. 다음으로 실제 철도교량에서 KTX를 다양한 조건으로 주행하고, 그에 의하여 발생한 변위를 VDMS과 LDV를 이용하여 계측한 뒤, 얻어진 두 변위를 비교하여 VDMS의 현장 적용 성능을 평가하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제18권6호
• /
• pp.123-130
• /
• 2014

본 연구에서는 카메라의 위치에 상관없이 정확하게 구조물의 변위를 측정할 수 있는 영상 기반 변위 계측 시스템을 제안하였다. 기존의 영상 기반 변위 계측 시스템은 카메라의 각도에 따라 오차를 유발하며, 그에 따라 대형 구조물에서 적용성에 제한되는 단점이 존재하였다. 본 시스템은 네 개의 점이 그려진 측정판을 변위를 측정하고자 하는 구조물의 위치에 부착하여 카메라로 촬영한 뒤 영상을 해석하여 변위를 얻는다. 측정판과 카메라의 각도에 무관하게 구조물의 변위를 얻기 위하여, 이미지 좌표계와 세계 좌표계 상의 두 평면간의 대응관계를 표현하는 평면 호모그래피 기법을 활용하였다. 성능 검증을 위하여 소형 구조물을 이용한 실내실험을 수행하였으며, 어떠한 각도에서 촬영하더라도 실제 변위를 정확하게 측정할 수 있음을 보였다.

• International Journal of Precision Engineering and Manufacturing
• /
• 제4권4호
• /
• pp.57-63
• /
• 2003

Machining information such as form accuracy and surface roughness is an important factor for manufacturing precise parts. To this regard, OMM (On the Machine Measurement) has been researched for last several decades to alternate CMM (Coordinate Measurement Machine) process. In this research, the OMM system with a laser displacement sensor was developed for measuring form accuracy and surface roughness of the machined workpiece on the machine tool. The surface roughness was estimated comparing the sensory signal with the reference data measured from master specimen. Also, form accuracy was determined from the moving averaged raw data. In addition, the geometric error map constructed beforehand using the geometric errors of the machine tool was used to compensate the obtained form accuracy. The overall performance was compared with CMM result, and verified the feasibility of the measurement system.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.607-612
• /
• 2000

Roundness measurement method using three displacement sensors makes in-process roundness measurement possible on the NC machine because it eliminates the vibration signal and eccentricity signal from measured roundness signal from the workpiece. But if measured signals contain noises, high precision measurement of the roundness isn't possible. In this study, a high precision in-process roundness measurement system is developed, which applies a Kalman filter to the roundness measurement method using three displacement sensors and can be used to measure vibration of the spindle.

• 한국지반공학회논문집
• /
• 제23권12호
• /
• pp.109-116
• /
• 2007

디지털 영상을 이용하여 대상체의 입체모델을 생성하는 전통적인 사진 측량 방법을 활용한 계측의 적용성을 살펴보았다. 본 연구에서는 디지털 영상을 이용한 계측의 적용성을 향상시키기 위한 방안을 마련하고자 실험을 통해 다양한 영향 인자의 설정에 따른 정밀도와 정확도를 분석하였다. 디지털 영상 계측은 획득된 이미지의 해상도가 클수록, 대상체에서 가까울수록, 초점거리가 클수록 보다 좋은 계측 결과를 나타내었다. 또한, 다양한 각도에서 가능한 여러장의 이미지를 획득하여 처리할 경우 계측 오차를 감소시킬 수 있음을 확인하였다. 디지털 영상계측의 정밀도는 계측대상과 측정조건에 따라 크게 좌우될 수 있다. 디지털 영상계측을 실대형 라이닝 재하실험의 시험편 변위측정에 적용해봄으로써 정밀 변위 계측분야에 활용성을 파악하였다.

• 한국응용과학기술학회지
• /
• 제14권2호
• /
• pp.35-40
• /
• 1997

The organization of phospholipid monolayers and their monolayers mixed with fatty acid containing azobenzene on the water surface was investigated by means of the displacement current measurement method. The phase transition from the gaseous phase to the gaseous-fluid phase which accompanies the polar ordering of phospholipid molecules was detected in the range of immeasurably low surface pressure. The molecular area which gives the onset of the transition was determined for phospholipid monolayers. The Maxwell displacement current(MDC) pulses were generated across mixed monolayers due to the photoisomerization of fatty acid containing azobenzene by alternating irradiation of ultraviolet and visible light, because the condensation of pure azobenzene monolayers was loosened by the introduction of phospholipids into the monolayers. The displacement currents generated during light irradiation were also investgated in connection with monolayer compression cycles. It was found that the maximum of MDC appeared at the molecular area just before the initial rise of surface pressure in compression cycles.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1413-1415
• /
• 2002

The Displacement current measurement system used in this experiment because detecting the dynamic behavior of monolayers at the air-water interface is possible. It basically consists of a film balance, a pair of electrodes connected to each other through a sensitive ammeter. Here, one electrode is suspended in air and the other electrode is placed in the water. PBLG phase transformation measured by Maxwell-displacement-current-measurement method in surface of the water. Measured (surfacc pressure, displacement current and dipole moment) of monolayers of PBLG on the water surface. We measured displacement current that occur when changed temperature(15, 20, 25$^{\circ}$ ) and the compression speed(30, 40, 50(mm/min)). From the result, it is known that curren generated in the range of high surface pressur compression velocity and temperature become faste.

• 한국컴퓨터정보학회논문지
• /
• 제23권11호
• /
• pp.43-49
• /
• 2018

In this paper, we propose a displacement measurement method based on deep learning using image data obtained from tensile tests of a material specimen. We focus on the fact that the sequential images during the tension are generated and the displacement of the specimen is represented in the image data. So, we designed sample generation model which makes sequential images of specimen. The behavior of generated images are similar to the real specimen images under tensile force. Using generated images, we trained and validated our model. In the deep neural network, sequential images are assigned to a multi-channel input to train the network. The multi-channel images are composed of sequential images obtained along the time domain. As a result, the neural network learns the temporal information as the images express the correlation with each other along the time domain. In order to verify the proposed method, we conducted experiments by comparing the deformation measuring performance of the neural network changing the displacement range of images.

• 한국정밀공학회지
• /
• 제22권8호
• /
• pp.50-56
• /
• 2005

This paper is described a development of an optical fiber displacement sensor. The optical fiber sensor using an intensity modulated measures the displacement between target and sensor. A prototype sensor is composed of a transmitting part, a receiving part and a signal processing circuit. The experiment was conducted not only the sensor performance but also factors that affect intensity. The main performance of this sensor is resolution of 0.37um and the non-linearity $0.7\%$ FS and the dynamic bandwidth of about 6.3kHz. As a result of rotation test, the prototype sensor showed an equivalent performance to a commercial eddy current sensor.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 춘계학술대회 논문집
• /
• pp.414-419
• /
• 1995

The wire displacement of wire electric discharge machine has been measured using He-Ne laser. A measurement system consisted of He-Ne laser, A/D converter, 4 divided photodiode, amplifier, sensor process instrument, and personal computer. The processing parameters were varid with feed rate, wire tension, wire speed and voltage. The laser beam intensity transmitted on a 4 divided photodiode was varied by processing wire electric descharge machine with various process parameters. The 4 divided photodiode and amplifier were used to change the detected beam intensity into voltage. Variation of wire displacement was between 11 and 125 .mu. m. The wire tension was dominant on the variation of wire displacement among many parameters.