• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.2
• /
• pp.65-71
• /
• 2014

This paper present the multi-modal user distance estimation system using mono camera and mono microphone basically equipped with a mobile device. In case of a distance estimation method using an image, we is estimated a distance of the user through the skin color region extraction step, a noise removal step, the face and eyes region detection step. On the other hand, in case of a distance estimation method using speech, we calculates the absolute difference between the value of the sample of speech input. The largest peak value of the calculated difference value is selected and samples before and after the peak are specified as the ROI(Region of Interest). The samples specified perform FFT(Fast Fourier Transform) and calculate the magnitude of the frequency domain. Magnitude obtained is compared with the distance model to calculate the likelihood. We is estimated user distance by adding with weights in the sorted value. The result of an experiment using the multi-modal method shows more improved measurement value than that of single modality.

• Journal of the Optical Society of Korea
• /
• v.13 no.2
• /
• pp.245-250
• /
• 2009

We propose a digital holographic interference analysis method based on a 2-frame phase-shifting technique for measuring an optical mirror surface. The technique using 2-frame phase-shifting digital interferometry is more efficient than multi-frame phase-shifting techniques because the 2-frame method has the advantage of a reduced number of interferograms, and then takes less time to acquire the wanted topography information from interferograms. In this measurement system, 2-frame phase-shifting digital interferograms are acquired by moving the reference flat mirror surface, which is attached to a piezoelectric transducer, with phase step of 0 or $\pi$/2 in the reference beam path. The measurements are recorded on a CCD detector. The optical interferometry is designed on the basis of polarization characteristics of a polarizing beam splitter. Therefore the noise from outside turbulence can be decreased. The proposed 2-frame algorithm uses the relative phase difference of the neighbor pixels. The experiment has been carried out on an optical mirror which flatness is less than $\lambda$/4. The measurement of the optical mirror surface topography using 2-frame phase-shifting interferometry shows that the peak-to-peak value is calculated to be about $0.1779{\mu}m$, the root-mean-square value is about $0.034{\mu}m$. Thus, the proposed method is expected to be used in nondestructive testing of optical components.

• Journal of Korean Elementary Science Education
• /
• v.33 no.1
• /
• pp.181-194
• /
• 2014

The purpose of this study was to analyze the difference between eye movements according to science achievement of elementary school students on measuring tasks. Science achievement was graded by the results of Korea national achievement test conducted in 2012. As an assessment tool to check measuring task, two measuring measure problems from TSPS(Test of Science Process Skill; developed in 1994) which were suitable for eye tracking system were adopted. The subjects of this study were 3 underachievers and 3 overachievers from 6th grade who agreed to participate in the research. SMI was used to collect EMD (eye movement data). Experiment 3.2 and BeGaze 3.2 programs were used to plan experiment and analyze EMD. As a result, eye movements of participants in measuring task did not show the path to the common gaze by groups. To solve the problem of using specific measuring strategies related to the correct answer. Underachiever who failed in measuring tasks don't have enough measurement capabilities and lack eye movement through the area of interest for cognitive thinking. These results show that elementary school science curriculum dealing with measuring have to reflect a lot of step-by-step learning requires.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.12
• /
• pp.1015-1023
• /
• 2001

error behaviour can be considered as a linear combination of low amplitude random noise and abrupt jumps. The reason of jump appearance can be explained by the semi-shading effects(buildings, trees), jamming, high dynamic of vehicle and so on. This study describes the stand-alone GPS error jump smoothing algorithm which is developed based on the scalar adaptive filter. The algorithm consists of the coarse jump smoothing and the fine jump smoothing. On the coarse smoothing step, GPS velocities or position differences are used as the measurement for the scalar adaptive filter. The purpose of adaptive filter is to smooth the jump errors. The coarse positions are detennined by the integration of smoothed velocities. On the fine smoothing step, the differences between GPS positions and the coarse positions are smoothed by another scalar adaptive filter. The reason of fine smoothing is based on the facts that smoothing accuracy depends on the variance ofusefuJ signa\. The coarse smoothing which deal with the difference of positions provides the rough error removing. So the coarse smoothed velocities can have much more low amplitude than the raw ones. The fine smoothing procedure provides high quality of filtering process. Simulation results show the efficiency of proposed scheme.

• Journal of Technologic Dentistry
• /
• v.31 no.3
• /
• pp.67-85
• /
• 2009

This study aims to provide the research for dental technician's stress prevention and management with basic materials by understanding dental technician's psychosocial stress level and examining relevant factors. The subject of this study is 255 dental technologists who work mainly in Seoul Gyeonggi district for a month of April of 2009 and I conducted cross-sectional study through self administered survey. The contents of survey include general feature, occupational feature, health behavior feature. I used Karasek's Job Content Questionnaire, JCQ and Psychosocial well-being index, PWI-SF as means of measurement. To compare the level of dental technician's psychosocial stress, I conducted t-test and ANOVA and I measured the factors that are related with psychosocial stress symptom with step by step multiple regressive analysis. According to the result of Cronbach's a value which is yielded to verify the reliability of means of measurement, the reliability of concept is sufficient. The detailed result of this study is as follows. 1. According to the result of analyzing the stress symptom in accordance with general feature and occupational feature, those dental technologists who are older and not married, graduate from junior college, have lower position, work at university hospital or general hospital show lower stress(p<0.05). There is no difference in the level of psychosocial stress with regard to duty related feature, period of service, daily average working hours, monthly average pay. 2. With regard to health behavior feature, those dental technologists who control weight better and have meal more regularly show lower stress(p<0.05). Those dental technicians who smoke, drink liquid and take a suitable sleep show low stress but the difference does not have significance statistically. 3. With regard to the factors of stress in the workplace, those dental technicians who have lower duty related requirement, have higher duty related control ability, have higher social support, have less instability of employment and have less workload and physical burden show lower stress(p<0.05). 4. According to the result of analyzing the factors that influence dental technologist's stress symptom, social support has the most enormous influence on stress symptom. Unstable employment, regular exercise, regular eating, daily average sleeping hours and technological capacity are also important in this order. According to the result of this study, those dental technicians who have higher social support, less instability of employment, do exercise more regularly, take enough sleep more soundly and have higher technological capacity show lower psychosocial stress symptom. Therefore, to adjust appropriately the dental technician's stress and properly maintain and improve the dental technician's mental health, effective management plan that enables dental technicians to maintain smooth human relationships for dental technicians should be sought. In addition, heath education and health management for dental technicians should be given more thoroughly so that they can establish desirable health behavior in daily life.

• Journal of the Korea Institute of Building Construction
• /
• v.13 no.4
• /
• pp.372-381
• /
• 2013

In the construction industry, a great deal of research has been focused on productivity improvement because a minor change in labor productivity can often make the difference between a profit and a loss. This study shows how productivity measurement methods can be applied in practice, step by step, to analyze and identify potential problems both in productivity and methods performance for masonry work. A work sampling technique was conducted to determine the nature and extent of an observable activity as an aid to measuring overall performance. Also, a method productivity delay model was used to identify non-productivity in individual cycle times. From the work sampling technique, it was found that the masonry crew had a Labor Utilization Factor of 47.1%, and from the videotape analysis, it was found that the material and dumpster location need to be adjusted to reduce the travelling distance. We have found that efforts to improve the productivity of masonry work should be focused almost exclusively on machine and labor delays, based on the result from the method productivity delay model.

• The Journal of Korean Physical Therapy
• /
• v.14 no.1
• /
• pp.75-88
• /
• 2002

The purpose of this study was to investigate the influence of anterior, posterior, and lateral pelvic tilt exercise upon the gait characteristics of patients with hemiplegia including their gait velocity, cadence, stride length, step length of the non affected side, step length of the affected side, foot angle of the non affected side, foot angle of the affected side, base of support, and so on. The subject of this study was 24 men and women patients with hemiplegia. The patients, the subject of this study, were classified into 12 patients of treatment group applying pelvic tilt exercise using visual feedback and 12 patients of control group applying general pelvic tilt exercise, and then analyzed their gait before and after exercise. Temporal distance gait analysis (Boening, 1977) was used to analyze their gait, and ink foot-print was applied as on of measurement methods. To find out meaningful difference between control group and treatment group, this study carried out independent sample t-test for each item by utilizing SPSS/Win 10.0, compared changes in control group's and treatment group's gait characteristics before and after exercise as percentage, and applied paired t-test to conduct before-after test in same group. Statistical significance level was ${\alpha}$ < 0.05. The results of this study were as follows. As a result of independent sample t-test for control group's and treatment group's gait characteristics after exercise, it was not statistically significant so there was no meaningful difference between two groups. However, it was statistically significant in the change rate(%) of gait characteristics, and treatment group's patients with hemiplegia had been highly changed in gait characteristics in comparison with control group. From the above-mentioned results, could find that pelvic tilt exercise using visual feedback for patients with hemiplegia was effective to improve their gait ability and it could increase the ability in comparison with general pelvic tilt exercise. In the future, studies on the effect of pelvic tilt exercise using visual feedback shall be continued based on more quantitative methods.

• Journal of The Korean Society of Integrative Medicine
• /
• v.4 no.2
• /
• pp.1-11
• /
• 2016

Purpose : The purpose of this study was to identify whether virtual reality-based exercise could improve on balance, gait and fall efficacy in patients with Parkinson's disease. Methods : Ten patients with Parkinson's disease were randomly divided into either an experimental or control group. The experimental subjects performed vertual reality-based exercise, whereas the control subjects performed conventional physical therapy for 4 weeks. The balance, gait and fall efficacy of all subjects were assessed by using the Measurement Training and Documentation (MTD) balance system, force platform system, Korean version of Berg Balance scale (K-BBS), 6 Minute Walk Test (6MWT), and Korean version of Fall efficacy scale (K-FES) at pre training and post training. Wilcoxon signed rank test was used to analyze change before and after intervention in intra-group. Mann Whitney U test was used to analyze changes of all variables in inter-groups. Results : Subjects in the experimental group showed significant improvements in difference of weight distribution, K-BBS scores, antero-posterior and medio-lateral sway length, ground reaction force (GRF), 6MWT, and step length following training. The changes of difference of weight distribution, K-BBS scores, AP Sway Length, GRF, 6MWT, step length and K-FES scores in the experimental group were significantly more than them of the control group. Conclusion : The result of this study suggest that virtual reality-based exercise training is an intervention to improve on balance, gait, and falls efficacy in patients with Parkinson's disease.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.6
• /
• pp.995-1001
• /
• 1997

In this paper, a new positioning method with incoherence of white light is described and practically implemented to attach VCR heads on a drum very accurately. This method utilizes the Michelson Interferometer which uses white light with short coherence length as the light source to generate interference fringes only in case the optical path difference is shorter than about 2.mu.m. The course position of VCR heads and the fine are determined by appearance and visibility of interference fringes, respectively. The appearance are detected by an image processing technique using FFT(Fast Fourier Transform).

• Textile Coloration and Finishing
• /
• v.10 no.6
• /
• pp.55-66
• /
• 1998

In order to investigate the detergency effects of various detergents to stained polyester & cotton fabric with solid soils such as carbon black, liquid paraffin and fat, the optimum washing conditions according to the types of washing agent, the assesment of detergency effect by the measurement of reflectance after and before washing were studied. The detergency effect of various detergents to stained polyester and cotton fabric increased by using the mixtures of bleaching and enzyme detergent. In order to obtain the excellent detergency effect, 2-step treatment, the pre-washing with bleaching agent and bleaching-enzyme mixture detergent treatment is preferred. In comparison of the detergency to polyester and cotton fabric, it is assumed that the detergency to polyester stained fabric was superior than that to cotton stained fabric because of the difference of adhesive force between soil material and fabric in preparing solid stained fabric.