• Title/Summary/Keyword: Measurement element

검색결과 1,368건 처리시간 0.026초

DRUM impactor를 이용한 대기 입자상 물질 중 원소성분의 입경분포 특성 : 제주도 고산지역의 2002년 봄철 (3.29-5.30) 측정 연구 (Size Distributions of Trace Elements in Airborn Particulates Collected using Drum impactor at Gosan, Jeju Island : Measurements in Springtime 2002)

  • 한진석;문광주;류성윤;안준영;공부주;홍유덕;김영준
    • 한국대기환경학회지
    • /
    • 제20권4호
    • /
    • pp.555-569
    • /
    • 2004
  • Size -segregated measurements of aerosol composition using 8-stage DRUM impactor are used to determine the transport of natural and anthropogenic aerosols at Gosan site from 29 March to 30 May in 2002. Separation of ambient aerosols by DRUM impactor offers many Advantages over other standard filtration techniques. Some of the most important advantages are the ability to segregate into details by particle tire, to better preserve chemical integrity since the air stream doesn't pars through the deposit, to collect samples as a function of time, and to have a wide variety of impaction surfaces available to match analytical needs. Although the transport of Yellow sand is a well-known phenomenon in springtime, the result of measurement shows that not only soil dust but also anthropogenic aerosols, including sulfur, enriched trace metals such as Pb, Ni, Zn. Cu, Cr, As, Se, Br, are transported to Gosan in springtime. This study combines the size- and time-resolved aerosol composition measurements with isentropic, backward air-mass trajectories in order to identify some potential source regions of anthropogenic aerosols. As a result, during the NYS period, the average concentration of PM$_{10}$ was 46$\mu\textrm{g}$/㎥, Si, Al. S, Fe, Cl, K, Ca were higher than 1,000 ng/㎥ and Ti was about 100 ng/㎥. The concentrations of Zn, Mn, Cu. Pb, Br, Rb, V, Cr, Ni. At, Se ranged between 1 and 70 ng/㎥. More than 50% typical soil elements, tuck as Al, Si, Fe, Cd. Ti, Cr, Cu, Br. were distributed in a coarse particle range(5.0-12${\mu}{\textrm}{m}$). In other hand, anthropogenic pollutants, luck as S, N, Vi, were mainly distributed in a fine particle range (0.09-0.56${\mu}{\textrm}{m}$). During the YS period, PM$_{10}$ increased about 8 times than NYS period, and main soil elements, such as Al, Si, S, K, V, Mn, Fe also doubled in coarse particle range (1.15-12${\mu}{\textrm}{m}$). But Zn, As, Pb, Cu and Se, which distributed in the time aerosols (0.09-0.56${\mu}{\textrm}{m}$), were on the same level with or decreased than NYS period. Finally. except the YS Period, coarse particles (2.5-12${\mu}{\textrm}{m}$) are inferred to be influenced by soil, coal combustion, waste incineration, ferrous and nonferrous sources through similar pathways with Yellow Sand. But fine particles have different sources, such as coal combustion, gasoline vehicle, biomass burning, oil or coal combustion, nonferrous and ferrous metal sources, which are transported from China, Korea peninsula and local sources.ces.

Al-Polymer 접합체의 흡습팽창에 대한 모아레 간섭 측정 및 수치해석 (Moire Interferometry Measurement and Numerical Analysis for Hygroscopic Swelling of Al-Polymer Joint)

  • 김기범;김용연
    • 한국산학기술학회논문지
    • /
    • 제15권6호
    • /
    • pp.3442-3447
    • /
    • 2014
  • 본 논문에서는 간단한 플라스틱전자패키지의 폴리머 흡습특성 평가 방법을 제시하였다. 흡습팽창에 의한 변형을 측정하고 유한요소법으로 해석하였다. 흡습특성 평가를 위해 시편제작을 제작하고, 흡습시간에 따라 폴리머에 내재된 수분질량을 측정하여, 수치해석 결과와 비교분석하였다. 흡습확산 방정식은 열전달 방정식과 유사한 형태를 가지고 있기 때문에 열전달 해석 절차에 따라 상용 유한요소코드를 적용하여 흡습압력비를 구하고, 자체코드로 흡습질량을 계산하였다. 비전도성 폴리머는 동일 제품이라도 생산시기에 따라 흡습특성에 변화가 있었다. 여러 가지 흡습특성에 대해 흡습질량을 수치해석으로부터 계산하고 측정치에 가장 근접한 흡습질량 변화의 그래프를 선택하여 최적의 확산계수와 용해도를 구하였다. 제시된 방법은 빠른 대응을 요구하는 생산현장에서 반도체 패키지 폴리머의 흡습특성을 신속하게 평가하는 데 적용될 수 있을 것이다. 또한 흡습팽창을 모아레 간섭계로 측정하고 수치해석으로 비교하였다. 결과적으로 흡습질량의 측정값과 수치해석 결과를 비교하여 용해도와 확산계수는 0.0320 [g/mm/N]과 0.243 [$mm^2/{\mu}s$]으로 결정하였고, ANSYS 구조해석에 의한 변형은 모아레 간섭에 의한 측정결과와 매우 유사하였다.

폴리페닐카보실란을 이용한 SiOC가 코팅된 스테인리스스틸 제조 및 이의 내부식성 특징 (SiOC Coating on Stainless Steel Using Polyphenylcarbosilane, and Its Anti-corrosion Properties)

  • 김종일;이윤주;김수룡;김영희;김정일;우창현;최두진
    • 한국재료학회지
    • /
    • 제21권1호
    • /
    • pp.8-14
    • /
    • 2011
  • To improve the chemical stability of metal, the ceramic coatings on metallic materials have attracted interest from many researchers due to the chemical inertness of ceramic materials. To endure strong acids, SiOC coating on metal substrate was carried out by dip coating method using 20wt% polyphenylcarbosilane solution; SiC powder was added to the solution at 10wt% and 15wt% to improve the mechanical properties and to prevent cracks of the film. Thermal oxidation as a curing step was carried out at $200^{\circ}C$ for crosslinking of the polyphenylcarbosilane, and the coating samples were pyrolysized at $800^{\circ}C$ under argon to convert the polyphenylcarbosilane to SiOC film. The thicknesses of the SiOC coating films were $2.36{\mu}m$ and $3.16{\mu}m$. The quantities of each element were measured as $SiO_{1.07}C_{6.33}$ by EPMA, and it can be confirmed that the SiOC film from polyphenylcarbosilane was formed in a manner that was carbon rich. The hardness of the SiOC film was found to be 3.2Gpa through nanoindentor measurement. No defect including cracks appeared in the SiOC film. The weight loss of the SiOC coated stainless steel was within 2% after soaking in 10% HCl solution at $80^{\circ}C$ for one week. From these results, SiOC coating shows good potential for application to protect against severe chemical corrosion of stainless steel.

구조물 손상평가를 위한 접합부 손상모델 및 신경망기법에 관한 연구 (A Study on Joint Damage Model and Neural Networks-Based Approach for Damage Assessment of Structure)

  • 윤정방;이진학;방은영
    • 한국지진공학회논문집
    • /
    • 제3권3호
    • /
    • pp.9-20
    • /
    • 1999
  • 프레임 구조물의 접합부 손상을 평가하기 위하여 접합부 손상모델과 신경망기법을 이용한 손상평가기법을 제안하였다 구조물의 보-기둥 접합부를 접합부의 회전강성을 갖는 등가의 스프링요소로 표현하였으며 접합부의 손상도는 손상 전 후의 고정도계수의 감소비율로 정의하였다 손상평가를 위하여 다층퍼셉트론즈 신경망 기법을 제안하였으며 손상평가성능을 향상시키기 위하여 부분구조추정법, 노이즈첨가학습, 자료교란법등의 기법을 적용하였다 10층 프레임 구조물에 대한 수치 예제해석과 2층 프레임 구조물에 대한 실험 예제해석을 통하여 제안기법의 유용성을 평가하였다 계측지점이 일부분으로 제한되어 있고 계측자료에 심한 계측오차가 포함되어 있는 경우에도 손상평가가 합리적으로 이루어질수 있음을 알 수 있었다.

  • PDF

원전주변 환경방사능 분석기술의 개선(I) (An Improvement on the Analysis Techniques of Environmental Radioactivity Around Nuclear Power Plants)

  • 김숭평;채경선;정운관
    • Journal of Radiation Protection and Research
    • /
    • 제20권1호
    • /
    • pp.8-15
    • /
    • 1995
  • 환경방사능 분석기술은 원자력시설의 가동중 정상 및 비정상 상태시 이상판단과 지역특성에 따른 주변환경 방사능의 특성 및 거동파악 등을 하는데 필요한 기술로 원전 가동전, 후 환경방사능량을 비교함으로서 방사능 오염 및 변화상황을 파악할 수 있다. 국내에는 현재 관련법에 따라 규제기관 및 관련기관에 의해 환경감시가 계속되어오고 있으나 분석기술에 대한 한국규격이 없으므로 분석절차가 서로 상이하고 분석결과의 상대오차율이 커서 환경방사선 감시결과에 대한 신뢰성이 떨어지고 있다. 따라서 토양시료에 대한 감마핵종 분석에 한정하여 기수행된 측정방법 및 결과 둥을 비교분석하므로서 원전주변 환경방사능 감시목적에 적합한 분석기술의 신뢰도 향상 및 상대오차율 최소화 방안을 도출하였다

  • PDF

2006-2008년 봄철 부산 지역 PM10과 PM2.5의 질량농도 및 금속성분의 화학적 특성 (Chemical Properties of the Metallic Elements and the Mass Concentration of PM10 and PM2.5 Observed in Busan, Korea in Springtime of 2006-2008)

  • 전병일;황용식
    • 한국지구과학회지
    • /
    • 제31권3호
    • /
    • pp.234-245
    • /
    • 2010
  • 본 연구에서는 2006년부터 2008년까지 3년간 봄철에 $PM_{10}$$PM_{2.5}$를 채취하여 질량농도와 금속원소의 화학적 특성, 기상인자와의 관계 분석, 황사 및 비황사시의 미세먼지 특성 그리고 이동경로에 따른 농도의 특성을 고찰하였다. 연구기간동안의 $PM_{10}$, $PM_{2.5}$, $PM_{10-2.5}$평균농도는 각각 $126.2{\pm}89.8$, $85.5{\pm}41.6$, $40.7{\pm}54.9{\mu}g/m^3$이었으며 $PM_{2.5}/PM_{10}$$PM_{10-2.5}/PM_{2.5}$ 비는 각각 0.70, 0.48이었다. 우리나라의 북서쪽인 북경을 포함한 지역과 서쪽인 상해를 포함한 지역에서 공기덩어리가 이류 할 때 가장 높은 미세먼지농도를 나타내었다.

반파장 로디드 라인 구조를 이용한 이동 통신 단말기용 다중 대역 내장형 안테나 설계 (Design of a Multi-band Internal Antenna Using Half Wavelength Loaded Line Structure for Mobile Handset Applications)

  • 신후광;정우재;정병운;박면주;이병제
    • 한국전자파학회논문지
    • /
    • 제16권12호
    • /
    • pp.1179-1185
    • /
    • 2005
  • 본 논문에서는 3중 대역 이상의 이동 통신 단말기를 위해 주파수 튜닝이 가능한 새로운 형태의 내장형 안테나를 제안하였다. 설계된 안테나의 동작 주파수 대역은 GSM(880${\~}$960 MHz)/GPS(1,575 $\pm$ 10 MHz)/DCS(1,710${\~}$1,880 MHz)/US-PCS(1,850${\~}$l,990 MHz)/W-CDMA(1,920${\~}$2,170 M/Hz) 대역을 포함한다. 제안된 안테나는 반파장 로디드 라인 구조와 모노폴 구조를 결합한 형태를 띄고 있으며 하나의 단락점과 급전점을 공유한다. 그리고 단락점과 접지면 사이의 집중형 인덕턴스 소자의 값을 조절함으로써 GSM과 GPS대역을 그대로 유지하면서 각각 DCS, US-PCS, W-CDMA대역을 만족시킬 수 있다. 사용된 인덕터 소자의 값은 주파수 튜닝에 따른 이득 저하를 최소화하기 위하여 최대 3.3 nH로 한정하였으며 이에 따른 안테나의 최대 이득은 GSM대역에서 -0.58${\~}$-0.30 dBi, GPS 대역에서 -0.57${\~}$0.43 dBi, DCS/US-PCS/W-CDMA 대역에서 0.38${\~}$l.15 dBi로 측정되었다. 시뮬레이션과 측정을 통해 제안된 안테나가 높은 주파수 대역에서 약 0.77 dB의 이득 변화 폭 내에서 약 240 MHz의 공진 주파수를 효과적으로 조절할 수 있음을 확인하였다.

기상1호에서 관측된 한반도 서해 및 남해상의 에어로졸 질량농도와 화학조성 특성 (Characteristics of Aerosol Mass Concentration and Chemical Composition of the Yellow and South Sea around the Korean Peninsula Using a Gisang 1 Research Vessel)

  • 차주완;고희정;신범철;이혜정;김정은;안보영;류상범
    • 대기
    • /
    • 제26권3호
    • /
    • pp.357-372
    • /
    • 2016
  • Northeast Asian regions have recently become the main source of anthropogenic and natural aerosols. Measurement of aerosols on the sea in these regions have been rarely conducted since the experimental campaigns such as ACE-ASIA (Asian Pacific Regional Aerosol Characterization Experiment) in 2001. Research vessel observations of aerosol mass and chemical composition were performed on the Yellow and south sea around the Korean peninsula. The ship measurements showed six representative cases such as aerosol event and non-event cases during the study periods. On non-event cases, the anthropogenic chemical and natural soil composition on the Yellow sea were greater than those on the south sea. On aerosol event cases such as haze, haze with dust, and dust, the measured mass concentrations of anthropogenic chemical and element compositions were clearly changed by the events. In particular, methanesulfonate ($MSA^-$, $CH_3SO_3^-$), a main component of natural oceanic aerosol important for sulfur circulation on Earth, was first observed by the vessel in Korea, and its concentration on the Yellow sea was three times that on the south sea during the study period. Sea salt concentration important to chemical composition on the sea is related to wind speed. Coefficients of determination ($R^2$) between wind speed and sea salt concentration were 0.68 in $PM_{10}$ and 0.82 in $PM_{2.5}$. Maximum wave height was not found to be correlated to the sea salt concentration. When sea-salt comes into contact with pollutants, the total sea-salt mass is reduced, i.e., a loss of $Cl^-$ concentration from NaCl, the main chemical composing sea salt, is estimated by reaction with $HNO_3$(gas) and $H_2SO_4$(gas). The $Cl^-$ concentration loss by $SO_4^{2-}$ and $NO_3^-$ more easily increased for $PM_{10}$ compared to $PM_{2.5}$. The results of this study will be applied to verifying a dust-haze forecasting model. In addition, continued vessel measurements of aerosol data will become important to research for climate change studies in the future.

암환자에게 다빈도로 활용되는 한약제제 10종에 대한 요오드의 함량 분석 (Determination of Iodine Contents in Ten kinds of Frequently used Oriental Herb Medicinal Products for Cancer Patient)

  • 이창희;최정은;김선하;정용삼;문종화;유화승
    • 대한암한의학회지
    • /
    • 제16권1호
    • /
    • pp.41-53
    • /
    • 2011
  • Background and Objectives: Iodine is an essential constituent of the thyroid hormones associated with the growth and development of humans and animals as an inorganic nutrition. This element may be accumulated in human blood, tissues and body through the intake of foodstuffs, a beverage, a nutritional supplement and a medicine, among others. The aim of the research is to find out a better medicinal stuff for the thyroid cancer patient who required a low level of iodine diet. Methods: Neutron activation analysis (NAA) used for the iodine analysis is one of nuclear analytical techniques using radiation and radioisotopes and very useful as sensitive analytical technique for performing both qualitative and quantitative multi-elemental non-destructive analysis of major, minor and trace components in variety of environmental and biological materials. In this study, iodine contents in ten kinds of oriental herb medicinal products, which is frequently used to cancer patients are determined by using instrumental neutron activation analysis (INAA) at the HANARO research reactor. The samples prescribed are manufactured as powdered form for taking medicine easily. The analytical quality control is performed to assure an uncertainty of the measurement and to compensate the measured data using a biological certified reference material, NIST SRM 1572, Citrus Leaves. The measured value is $1.89{\pm}0.35mg/kg$, and the relative error is 2.88%, and relative standard deviation is 19 % due to high counting error by small counts of gamma ray spectrum. The standard deviations for other elements such as Cl, K, Mn and Na were in the range of 2 to 8%. Result: The level of iodine contents of Biki-huan, Chungryong-huan and Chungcho-huan, samples detected is less than 6 mg/kg except Hangam Plus sample (more than 210 mg/kg) and six samples were not detected. Iodine in the samples of Shoxiho-tang, Shopunghualhyl-tang, Shocungryong-tang, Banhasaxim-tang, Insampaedox-san and Myunyuk Plus were not measured, but possible level of content can be estimated from the detection limits. In addition, the concentrations of some major elements like Cl, K, Mn, Na, in the samples were determined with the detection limits. Conclusions: Most of samples showed low iodine contents of less than 6 mg/kg but it turned out that most of testing samples can be used to classify the level of iodine diet samples considering the recommended low level of iodine diet 50 ${\mu}g$/day, and a better medicinal stuff for the thyroid cancer patient can be found.

Soft Plasma Flash X-ray Generator Utilizing a Vacuum Discharge Capillary

  • Sato, Eiichi;Hayasi, Yasuomi;Usuki, Tatsumi;Sato, Koetsu;Takayama, Kazuyoshi;Ido, Hideaki
    • 한국의학물리학회:학술대회논문집
    • /
    • 한국의학물리학회 2002년도 Proceedings
    • /
    • pp.400-403
    • /
    • 2002
  • The fundamental experiments for measuring soft x-ray characteristics from the vacuum capillary are described. These experiments were primarily performed in order to generate line spectra such as x-ray lasers. The generator consists of a high-voltage power supply, a polarity-inversion ignitron pulse generator, a turbo-molecular pump, and a radiation tube with a capillary. A high-voltage condenser of 200 nF in the pulse generator is charged up to 20 kV by the power supply, and the electric charges in the condenser are discharged to the capillary in the tube after closing the ignitron. During the discharge, weakly ionized plasma forms on the inner and outer sides of a capillary. In the present work, the pump evacuates air from the tube with a pressure of about 1 mPa, and a demountable capillary was developed in order to measure x-ray spectra according to changes in the capillary length. In this capillary, the anode (target) and cathode elements can be changed corresponding to the objectives. The capillary diameter is 2.0 mm, and the length is adjusted from 1 to 50 mm. When a capillary with aluminum anode and cathode electrodes was employed, both the cathode voltage and the discharge current almost displayed damped oscillations. The peak values of the voltage and current increased when the charging voltage was increased, and their maximum values were -10.8 kV and 4.7 kA, respectively. The x-ray durations observed by a 1.6 ${\mu}$m aluminum filter were less than 30 ${\mu}$s, and we detected the aluminum characteristic x-ray intensity using a 6.8 ${\mu}$m aluminum filter. In the spectrum measurement, two sets of aluminum and titanium electrodes were employed, and we observed multi-line spectra. The line photon energies seldom varied according to changes in the condenser charging voltage and to changes in the electrode element. In the case where the titanium electrode was employed, the line number decreased with corresponding decreases in the capillary length. Compared with incoherent visible light, these rays from the capillary were diffracted and diffused greatly after passing through two slits.

  • PDF